Microlife NC150 Non Contact Thermometer User Manual
Parts Description
- Measuring sensor
- Tracking light
- Display
- START button
- ON/OFF button
- Mode switch
- Battery compartment cover
- M-button (memory)
- All segments displayed
- AT Memory
- AK Ready for measuring
- AL Measurement complete
- AM Body mode
- AN Object mode
- AO Low battery indicator
- AP Changing between Celsius and Fahrenheit
- AQ Recall mode
- AR Recall the last 30 readings
- AS Measured temperature too high
- BT Measured temperature too low
- BK Ambient temperature too high
- BL Ambient temperature too low
- BM Error function display
- BN Blank display
- BO Flat battery
- BP Date/Time
- BQ Beeper function setting
- BR Replacing the battery
The Advantages of this Thermometer
Measures in a matter of seconds
The innovative infrared technology allows the measurement without even touching the object. This guarantees safe and sanitary measurements within seconds.
- Milk surface temperature in a baby’s bottle
- Surface temperature of a baby’s bath
- Ambient temperature
Accurate and reliable
The unique probe assembly construction incorporates an advanced infrared sensor, ensuring that each measurement is accurate and reliable.
Gentle and easy to use
- The ergonomic design enables simple and easy use of the thermometer.
- This thermometer is quick, therefore child-friendly.
Important Safety Instructions
- Follow instructions for use. This document provides important product operation and safety information regarding this device. Please read this document thoroughly before using the device and keep for future reference.
- This device may only be used for the purposes described in these instructions. The manufacturer cannot be held liable for damage caused by incorrect application.
- Never immerse this device in water or other liquids. For cleaning please follow the instructions in the «Cleaning and disinfecting» section.
- Do not use this device if you think it is damaged or notice anything unusual.
Control Displays and Symbols
- All segments displayed 9: Press the ON/OFF button 5 to turn on the unit; all segments will be shown for 1 second.
- Ready for measuring AK: When the unit is ready for measuring, the «°C» or «°F» icon will keep flashing while the mode icon (body or object) will be displayed.
- Measurement complete AL: The reading will be shown on the display 3 with the «°C» or «°F» icon and the mode icon steady.
- Low battery indicator AO: When the unit is turned on, the icon will keep flashing to remind the user to replace the batteries.
Setting Date, Time and Beeper Functions
Setting the date and time
- You can set the year by pressing the START button To confirm and then set the month, press the M-button 8.
- Press the START button 4 to set the month.
- Follow the previously mentioned instructions to set the day, 12 or 24 hour mode, hours and minutes.
Changing between Celsius
To switch the display between °C and °F, simply turn OFF the unit, press and hold the START button 4 for 5 seconds; after 5 seconds, the current measurement scale («°C» or «°F» icon) will flash on the display AP. Change the measurement scale between °C and °F by pressing the START button 4.
Cleaning and disinfecting
Use an alcohol swab or cotton tissue moistened with alcohol (70% Isopropyl) to clean the thermometer casing and the measuring sensor. Ensure that no liquid enters the interior of the device. Never use abrasive cleaning agents, thinners or benzene for cleaning and never immerse the device in water or other cleaning liquids. Take care not to scratch the surface of the sensor lens and the display.