iProven NCT-978 Non Contact Infrared Body Thermometer User Guide
Introduction
Thank you for choosing the iProven Non Contact Body Infrared Thermometer. The NCT-978 can be used to measure your body temperature via the forehead. It can also be used to measure the room or object temperature. Please read the instructions carefully in order to accurately utilize this equipment. Temperature measurements may not be valid or accurate if they are not performed in accordance with the instructions provided in this manual. Please keep these instructions handy for future reference. You can also find the latest digital version of this manual at www.iproven.com.
Overview
Description of the Device
- LCD Display
- Battery Cover
- ON/Scan Button
- MEMO Button
- Mode Button
- IR Sensor
Description of the Display
- Surface Mode
- Body Mode
- Digital Display
- Smile or Cry Indicator
- Battery Indicator
- Buzzer on/off Indicator
- Memory number
- ˚F
- ˚C
- Memory
Technical Specification
| Measurement Unit | C/ T | |
| Operating mode | Adjusted mode(Body mode) Direct mode{surface mode) | |
| Measuring site | Forehead | |
| Reference Body Site | Axillary | |
| Rated output range | Body mode 35.0 C – 42.0 C/95.0 °F -107.6°F Surface mode: 0.0 C -100.0 C / 32.0°F-212.0°F | |
| Extended output range | Body mode: 34.0 C – 34.9 C/ 93.2°F-94.8°F, 42.l C· 42.9 C /107.8-109.2 °F | |
| Range | Body mode:34.0 C ·42.9 C / 93.2°F-1 09.2°F Surface mode: 0.0 C -100.0 C / 32-212°F | |
| Accuracy | Body mode 34.0 C-34.9 C ± o.3 C / 93.2°F-94.8°F± 0.5°F; 35.0 C – 42.0 C± o.2 C /95.0°F-107 .6°F±0.4°F; 42.1 C· 42.9 C:±0.3 C /107.8°F-109.2°F:±0.5 ° F: | |
| Surface mode: ± 2.0 C/ ±3.6°E | ||
| Display Resolution | 0.1 C / 0.1″f | |
| Three-color Backlight (Color Alarm) | 35.5 °C·37.3°C/ 95.9°F-99.1°F: Green (Norma 1 Temperature); 37.4 ‘C-38.U°C(.”Alarm point) / 99.3°F-100.4°F: Yellow (Slight Fever) 38.1°C.42.9°C I 100.6°F-109.2 °F: Red(High Fever)
| |
| Measuring Distance | 1 CM -S CM( 0.4-2 in) | |
| Memories |
| |
| Power Supply Requirements | |
| Batteries | 1.5V (AAA) alkaline battery X 2 (!EC Type LR03) |
| Adaptable Range | 2.6 V-3.6 V |
| Environmental | |
| Operating Condition | Operating Temperature :15.O”C -3 S.O”C(59.0°F- 95.0°F), atmospheric pressure:70 Kpa-106 Kpa |
Troubleshooting
Replacing The Battery
- Open and release battery cover following indicator on the surface of battery. Before changing the battery be sure the system is already power off.
- Remove the battery and replace with 2 new one, type AAA, Make sure align properly as indicated inside the battery cover .
- Slide the battery cover back in until it snaps in place.
- Do not dispose of used batteries in household waste. Take them to special local collection
- In case, if system is latched up after changing You may not follow up the process of rule one. Just take off battery, waiting 30 sec, then load battery again.
Limited Warranty
This Limited Warranty covers any defects in material or workmanship under normal use during the Warranty
Period of 365 days after purchase. iProven will either replace the product or repair the Product at no charge, using new or refurbished replacement parts. A replacement product or product part assumes the remaining warranty of the original product purchase. This Limited Warranty does not cover batteries and packaging. It also does not include any problem that is caused by conditions, malfunctions or damage not resulting from defects in material or workmanship.
