HP Neverstop Laser MFP 1200 series User Manual
SETUP GUIDE
Remove the packing tape. Lift the scanner and the top cover. Remove and recycle the orange plastic handle with the attached black sheet.
Install the input tray, load paper, and then slide the cover into place over the tray.
Pull out the output bin extension.
Plug in the printer. The printer turns on when it is plugged in and can take up to 1 minute to warm up. You will hear a series of noises,
which is normal. When the Ready light stops blinking, the printer is ready.
Note: Do not press the Power button as this will turn off the printer and stop the warm-up process.
Download HP Smart software to complete printer setup.
Trouble getting started? Find setup information and videos online.
Printer views
- Control panel
- Flatbed scanner
- Reload port
- Reload Status light
- Toner level indicator
- Input tray
- Output bin extension
- Finger recess
- Output bin
Printer back view
- Ethernet network port (Ethernet models only)
- USB interface port
- Power connection
Technical specifications
See www.support.hp.com for current information.
Supported operating systems
The following information applies to the printer-specific Windows PCLmS and OS X print drivers.
Windows: The HP Software Installer installs the PCLmS, or PCLm-S driver depending on the Windows operating system, along with optional software when using the software installer. For more information, visit the product support website at www.hp.com/support .
OS X: Mac computers are supported with this printer. Download HP Easy Start either from 123.hp.com or from the product support website at www.hp.com/support , and then use HP Easy Start to install the HP print driver.
HP limited warranty statement
PRODUCT : DURATION OF LIMITED WARRANTY*
HP Neverstop Laser MFP 1200a, 1200n, 1200w, 1200nw, 1201n, 1202nw, 1202w: One-year limited warranty
This HP Limited Warranty applies only to HP-branded products sold or leased a) from HP Inc., its subsidiaries, affiliates, authorized resellers, authorized distributors, or country distributors; and, b) with this HP Limited Warranty.
HP warrants to you, the end-user customer, that the HP hardware and accessories will be free from defects in materials and workmanship after the date of purchase, for the period specified above. If HP receives notice of such defects during the warranty period, HP will, at its option, either repair or replace products which prove to be defective, except as otherwise required by local law. Subject to local law, replacement products may be either new or equivalent in performance to new.
HP warrants to you that HP software will not fail to execute its programming instructions after the date of purchase, for the period specified above, due to defects in material and workmanship when properly installed and used. If HP receives notice of such defects during the warranty period, HP will replace software which does not execute its programming instructions due to such defects.
REFRENCESS LINK
https://support.hp.com/us-en/product/hp-neverstop-laser-mfp-1200-printer-series/22955699
http://h10032.www1.hp.com/ctg/Manual/c06318365.pdf
