Table of contents
show
JBL’s new Quantum 910P gaming headsets User Manual
WHAT’S IN THE BOX
OVERVIEW
- ANC / TALKTHRU LED
- ANC / TALKTHRU button
- Game audio-chat balance dial
- Volume Control
- Detachable Windshield foam
- Notification LED for mic mute / unmute
- Microphone Mute / un Mute
- CHARGING LED
- 3.5 mm Audio Jack
- USB-C port
- Voice Focus Boom Microphone
- SPATIAL SOUND / head tracking control
- Power on / off and Bluetooth pairing slider
- POWER / 2.4GH z / Bluetooth LED
- RGB Lighting Zones
- Flat-fold ear cup
- 2.4GH z PAIRING BUTTON
- Volume Control
- MIC MUTE BUTTON
Calibration microphone
POWER ON & CONNECT
Bluetooth
SETUP
BUTTON COMMAND
First time setup
- 9a Connect the headset to your PC via 2.4GHz USB wireless connection.
- 9b Go to “Sound Settings” -> “Sound Control Panel”.
- 9c* Under “Playback” highlight “JBL Quantum910P Console Wireless GAME” and select “Set Default” -> “Default Device”.
- 9d Highlight “JBL Quantum910P Console Wireless CHAT” and select “Set Default” -> “Default Communication Device”.
- 9e Under “Recording” highlight “JBL Quantum910P Console Wireless CHAT” and select “Set Default” -> “Default Device”.
- 9f In your chat application select “JBL Quantum910P Console Wireless CHAT” as the default audio device.
- 9G Follow the onscreen instructions to personalize your sound settings.
* If you have not installed JBL Quantum Engine, ensure to complete this step before enabling JBL Quantum SPATIAL 360.
MICROPHONE
CHARGING
LED BEHAVIOURS
TECH SPEC
- Model: QUANTUM910P CONSOLE WIRELESS
- Driver size: 50 mm Dynamic drivers
- Frequency response (Passive): 20 Hz – 40 kHz
- Frequency response (Active): 20 Hz – 20 kHz
- Microphone frequency response: 100 Hz – 8 kHz
- Max input power: 30 mW
- Sensitivity: 111 dB SPL / 1 mW
- Maximum SPL: 93 dB
- Microphone sensitivity: -38 dBV / Pa @1 kHz
- Impedance: 32 ohm
- 2.4GHz Wireless transmitter power: <13 dBm
- 2.4GHz Wireless modulation: GFSK, π/4 DQPSK
- 2.4GHz Wireless carrier frequency: 2400 MHz – 2483.5 MHz
- Bluetooth transmitted power: <13 dBm
- Bluetooth transmitted modulation: GFSK, π/4 DQPSK
- Bluetooth frequency: 2400 MHz – 2483.5 MHz
- Bluetooth profile version: A2DP v1.3, HFP v1.8
- Bluetooth version: BT Core v5.2
- Battery type: Li-ion battery (3.7 V / 1300 mAh)
- Power supply: 5 V 2 A
- Charging time: 3.5 hrs
- Music play time with BT+2.4GHz on and ANC+RGB lighting off: Up to 34 hrs
- Talk time with BT+2.4GHz on and ANC+RGB lighting off: Up to 38 hrs
- Music play time with only 2.4GHz on and ANC+RGB lighting off: Up to 39 hrs
- Talk time with only 2.4GHz on and ANC+RGB lighting off: Up to 44 hrs
- Music play time with only BT on and ANC+RGB lighting off: Up to 45 hrs
- Talk time with only BT on and ANC+RGB lighting off: Up to 47 hrs
- Microphone pickup pattern: Unidirectional
- Weight: 420 g
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
