Insignia NS-AC10P6WH 10000 BTU Portable Air Conditioner User Guide
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your NS-AC10P6WH represents the state of the art in portable air conditioner design and is designed for reliable and trouble-free performance.
Important Safety Instructions
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your portable air conditioner.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your portable air conditioner.
WARNING
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this machine near water.
- Clean only with damp cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the machine.
- Do not attempt to modify or extend the power cord of this machine.
- Unplug this machine during lightning storms or when it will not be used for long periods of time.
- Make sure that the available AC power matches the voltage requirements of this machine.
- Do not handle the plug with wet hands. This could result in an electric shock.
- Unplug the power cord by holding the plug, never by pulling the cord.
- Do not turn the machine on or off by plugging or unplugging the power cord.
- Turn off the machine before unplugging it.
- Refer all servicing to qualified service personnel. Servicing is required when the machine has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the machine, the machine has been exposed to rain or moisture, does not operate normally, or has been dropped.
- To reduce the risk of fire or electric shock, do not expose this machine to rain, moisture, dripping, or splashing, and no objects filled with liquids should be placed on top of it.
- Batteries should not be exposed to excessive heat such as sunshine, fire, or the like.
Caution
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Additional precautions
- This machine is intended for household use. Do not use for any other purpose.
- Use this machine indoors in a dry location only. Do not use it outdoors.
- Do not place heavy objects on the machine, as this could damage the machine.
- Wipe the machine with a soft cloth to clean it. Do not use wax, thinner, or irritating detergents.
- Do not allow children or pets to drink the water discharged by the machine.
- Do not disassemble or attempt to repair the machine yourself.
- Do not plug this machine into an outlet with several other high electrical usage appliances.
- Keep the machine away from heat sources and avoid direct sunlight.
- If the machine is making a loud noise or producing an odor or smoke, switch off it, disconnect the plug, and immediately try to determine the cause
- Do not place heavy objects on the power cord to avoid it being crushed and causing an electric shock.
- Do not put your fingers or hard objects into the outlet air guide bars.
- Turn the machine off and unplug it if there is water inside the machine, then contact qualified service personnel for servicing.
- Turn the machine off and unplug it before cleaning, moving, or servicing it.
- To avoid injury, do not allow children or other individuals with special needs to touch or operate the machine. The machine should only be used with adult supervision.
- Place the air conditioner on a flat surface and upright to ensure the normal operation of the compressor.
- Do not use the machine near gasoline or other flammable liquids.
- Do not use aerosol sprays or other solvents near the machine. This may cause plastic deformation or possibly damage the electrical components of the machine.
Electric Shock Hazard Failure to follow these instructions can result in electric shock, fire, or death.
- This unit must be properly grounded.
- Do not, under any circumstances, cut or remove the grounding plug.
- If you do not have a properly grounded AC outlet, or if there is any doubt that the outlet is not properly grounded, a qualified electrician should check the outlet and circuit and, if necessary, install a properly grounded outlet.
- This air conditioner must be plugged into a grounded 120V, 60 Hz AC outlet, protected by a 15 amp time-delay fuse or circuit breaker.
- This air conditioner must be installed in accordance with national wiring codes.
- Do not alter or modify the plug or cord of this air conditioner. If the power cord becomes worn or damaged, the cord should only be replaced by a qualified service technician using genuine replacement parts.
- Do not use an extension cord.
Electrical Safety
Integrated circuit breaker
For additional safety, the power cord on this air conditioner features an integrated circuit breaker. You can test and reset the circuit breaker using the buttons provided on the plug case.
The circuit breaker should be tested periodically by pressing the TEST button then the RESET button. If the TEST button does not cause the circuit breaker to trip, or if the RESET button will not stay engaged, unplug the air conditioner immediately and contact an Insignia technician.
Preferred grounding method
Temporary grounding
Due to potential safety hazards, we strongly discourage the use of an adapter plug. If an adapter plug must be used for a temporary connection, use only a UL-listed adapter with a minimum capacity of 110-120V~60Hz, 10A and 1150W. Make sure that the large slot of the adapter is aligned with the large slot in the outlet.
To prevent damage to the adapter’s ground terminal, hold the adapter in place while plugging or unplugging the air conditioner. Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal and not insulated and the wall receptacle is grounded through the house wiring. Frequent connection and disconnection can damage the ground terminal on the adapter. Never use a broken or damaged adapter.
Features
Package contents
- 10,000 Btu portable air conditioner
- Exhaust hose with diffuser
- Window seal plate assembly (window seal plates [2], security bracket, and type A screws [2], type B screw (big head – 1), and type C screw [1])
- Remote control (with two AAA batteries)
- User Guide
Main components
Control panel
Remote control
Setting up your portable air conditioner
Remove and store (optional) packing materials for reuse. Remove any shipping tape before using the air conditioner. Remove tape residue with liquid dish soap and a damp cloth. Do not use sharp tools, alcohol, thinners, or abrasive cleaners to remove adhesive, which could damage the finish.
Note
- Do not remain in the direct airflow from the air conditioner for extended periods.
- When used at the same time as stoves, fireplaces, or other combustion/heating devices, make sure that there is sufficient flow of fresh air into the room. Do not use in tightly closed spaces with these types of devices.
- This air conditioner is intended for household use as a consumer comfort appliance. Do not use it as a precision climate control system for the purpose of cooling precision equipment, food, pets, plants, artwork, and so on. Such items could be damaged.
- Do not bend the hose downward when the window installation kit is not being used. Doing so may cause inferior performance or failure of the air conditioner.
Placing your air conditioner
Place the unit on a flat, dry area near a window, so you can use the hose and diffuser to connect the air conditioner to the window installation kit in order to vent the exhaust air outside. To maintain good air circulation and optimum machine performance, leave a 20 in. (50 cm) space around it.
Installing your air conditioner
- Screw the exhaust duct assembly to the air outlet on the back of your portable air conditioner.
- Measure the window size.
- Adjust the length of the window sealing plate to fit the window opening and secure it with a screw.
- Install the window sealing plate in the window opening and secure it with the screws provided.
- Insert the diffuser into the vent panel, then slide it down/left until it clicks into place.
- If desired, attach the diffuser to the vent panel with a type C screw.
- For optimum performance, do not twist the venting hose. For better efficiency, shorten the hose, if possible.
Caution
The exhaust duct is designed especially for this air conditioner. Replacing or lengthening the duct could result in damage to your unit.
- If desired, install the security bracket with the type B screw.
Using your portable air conditioner
Inserting the batteries in the remote control
- Press down on the arrow on the back of the remote control, then slide the battery compartment cover from the battery compartment.
- Insert two AAA carbon-zinc batteries (provided) into the battery compartment. Note the proper orientation of the + and – polarity of the batteries.
- Reinstall the battery compartment cover, making sure the tab locks into place.
Notes
- Use only carbon-zinc or alkaline batteries. Do not use rechargeable batteries.
- When you replace the batteries, always replace them with new batteries. No not mix old and new batteries.
- If your air conditioner will not be used for an extended period of time, remove the batteries from the remote control.
Cautions
- If the fluid from inside the batteries comes into contact with your skin or clothes, wash immediately with clean water.
- Do not use the remote control if the batteries are leaking.
- If the fluid from inside the batteries gets into your mouth or eyes, flush immediately with clean water and contact a doctor for treatment.
Using the air conditioner
You can control your air conditioner by using the control panel on the front of the unit, or by using the remote control. If using the remote control, always point it at the air conditioner.
Running your air conditioner in DRY mode
If you run your air conditioner continually in DRY mode because of high humidity or other reasons, the water collection tank should drain continuously. To accomplish this:
- Unplug your air conditioner and move it to a location where you can work on it.
- Remove the rubber plug from the unit.
- Remove the filter case.
- Install a 1/2 in. inside diameter drain hose on the back of the unit where you removed the rubber plug. Use a hose clamp to make sure that there are no leaks.
- Replace the filter case.
- Place the open end of the hose in a suitable location to drain continuously.
- Plug in your air conditioner and restart it.
Troubleshooting
Caution
Do not try to repair your portable air conditioner yourself. Doing so invalidates the warranty.
Intelligent error indication
When any of the following error indicators appear on the LED display, turn off your air conditioner and call a professional maintenance technician or service center.
Cleaning and maintaining your air conditioner
Your air conditioner is designed for year-round use with only minimal cleaning and maintenance For maximum efficiency, we recommend that you have the cooling coils inspected and cleaned annually. Your local Best Buy Service Center can provide this inspection and cleaning for a nominal fee.
Warning
- Unplug the air conditioner before cleaning or performing any maintenance or service.
- Be careful when cleaning coils or removing or reinstalling the filter. The cooling fins are very sharp.
- Failure to follow the above precautions could result in electric shock or personal injury.
Cleaning the case
- Wipe the case with a slightly damp cloth, then wipe dry with a dry cloth.
Caution
To prevent damage to the finish, do not use:
- Gasoline, benzine, thinner, or other similar solvents.
- Abrasive cleaners.
Never pour water onto or into the air conditioner. It could damage the internal components and create a shock or fire hazard.
Cleaning the air filter
The air filter should be cleaned every two weeks. Depending on indoor air quality, the filter may require cleaning more often. A dirty air filter decreases the airflow and reduces the efficiency of the air conditioner. Do not operate the air conditioner without the air filter in place.
- Lift the air filter out by the handle.
- Clean the filter with a vacuum cleaner. If the filter is very dirty, it can be washed by hand in warm water with a mild detergent.
Cautions
- Do not use harsh cleaners or very hot water.
- Do not wash in a dishwasher or washing machine.
- Let the filter dry completely, then reinstall it in the air conditioner.
Note
- When the filter is not replaced in the air conditioner correctly, there is a gap between the filter case and the unit.
Emptying the water collection tank
When the internal water collection tank is full, “FL” appears on the LED display and your air conditioner turns off until the tank is emptied.
Notes
- When operating or draining water from your air conditioner, always protect carpeting and floors from possible water spillage.
- When you drain the water from your air conditioner, be sure to wipe up any spilled water with a dry cloth or towel.
- Unplug your air conditioner, then disconnect the exhaust hose from the back.
- Move your air conditioner to a location where a suitable drain is available or place a drain pan under the unit that is capable of holding up to 1.3 pints (.6 liters) of water.
- Remove the rubber plug from the drain outlet and insert a syphon hose (not included) into the opening.
- Syphon the water from your air conditioner.
- After you have drained the water collection tank, replace the rubber plug, making sure that the bolt is secure.
- Place the air conditioner in the desired location, reconnect the exhaust hose, then plug it in. When the air conditioner is restarted after being drained, it automatically starts in COOL mode with a temperature setting of 72°F.
Storing your air conditioner
If your air conditioner will not be used for an extended period of time, we suggest that you prepare it for storage by doing the following:
- Unplug your air conditioner.
- Remove the rubber plug and drain the water collection tank completely.
- Reinstall the rubber plug.
- Remove the filter case and clean the filter. Allow it to dry completely, then reinstall it.
- Remove the batteries from the remote control.
- Store the air conditioner in a cool, dry place, away from direct sunlight, extreme temperatures, and excessive dust.
Restarting your air conditioner after storage
- Make sure that the filter case and rubber plug are in place.
- Make sure that the power cord and plug are in good condition.
- Install new AAA batteries in the remote control.
- Move the air conditioner to the location where you plan to use it and reconnect the exhaust hose and electrical plug.
- Restart your air conditioner and make sure that everything runs smoothly.
ONE-YEAR LIMITED WARRANTY – INSIGNIA
The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”). For this warranty to apply, your Product must be purchased in the United States or Canada from a Best Buy branded or Future Shop branded retail store or online at www.bestbuy.com, www.bestbuy.ca, or www.futureshop.ca and is packaged with this warranty statement.
Contact Insignia:
For customer service please call 1-877-467-4289 www.insigniaproducts.com INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2015 Best Buy. All rights reserved.
Made in China
DOWNLOAD PDF LINK
