Insignia NS-APMWH2 Medium Room Air Purifier User Manual
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
- Use indoors only.
- Do not use for any purpose other than described in this user guide.
- Use only manufacturer’s recommended accessories.
- Do not use with damaged cord or plug.
- If appliance is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water, have it repaired at an authorized service center.
- Do not move or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp corners. Keep cord away from heated surfaces.
- Do not run cord under carpeting.
- Do not cover cord with throw rugs, runners or similar coverings. Do not route cord under furniture or appliances.
- Arrange cord away from traffic areas so it will not be tripped over.
- Do not unplug by pulling cord. To unplug, grasp the plug, not the cord.
- Do not handle plug or appliance with wet hands.
Features
- Designed for rooms measuring as large as 497 sq. ft. (46.1 sq. m)
- Captures 99% of particle pollution in the air, removing irritants and improving visibility
- HEPA filter removes allergens, mold, dust, pet dander, smoke, and pollen
- Carbon filter removes odors from chemicals like ammonia, formaldehyde, and nicotine
- Washable pre-filter removes large irritants such as hair and dander
- LED display shows you your current air quality level and filter life
- Four fan speeds (plus sleep mode) let you select how quickly air is purified
- Timer runs the purifier for a pre-set time (1, 2, 4, 8, or 12 hours), then automatically turns it off
- Child lock prevents accidental setting changes
Package contents
- Air Purifier Large Room
- Pre-filter/charcoal filter/HEPA air filter (combined and pre-installed)
- User Guide
Components
Control panel
# | ITEM | DESCRIPTION |
1 | (Auto mode indicator) | Lights when Auto mode is turned on. |
2 | (child lock indicator) | Lights when the child lock is turned on. |
3 | Timer indicators | Light to show the selected turn-off time. See Setting the timer on page 9. |
4 | Fan speed indicators | Light to show how long the air purifier runs before turning off. See Adjusting the fan speed on page 9. |
5 | (Auto mode) | Press to turn Auto mode on or off. See Using Auto mode on page 9. Press and hold for three seconds to turn the child lock on or off. See Turning the child lock on or off on page 9. |
6 | (timer) | Press to set the turn-off timer. See Setting the timer on page 9. |
7 | (power) | Press to turn your air purifier on or off (standby mode). See Turning your air purifier on and off on page 9. |
8 | (fan speed) | Press to select the fan speed. See Adjusting the fan speed on page 9. |
9 | Filter reset button and filter replacement indicator | Press and hold to reset the filter replacement indicator. The indicator above the button turns off. |
Display
# | ITEM | DESCRIPTION |
1 | (air quality indicator) | Indicates the air quality. • Green—great • Yellow—okay • Orange—bad • Red—hazardous* *Proceed with caution and relocate to a less hazardous area and let the purifier run for at least 15 minutes. |
2 | Digital display | Shows the number of particles ≤ 2.5 micrometer in diameter. |
Using your air purifier
Turning your air purifier on and off
- Plug your air purifier power cord into a power outlet. Your air purifier enters standby mode, and a buzzer sounds once.
- Press (power) to turn your purifier on.
- Press again to turn off (standby mode) your purifier. A buzzer sounds to indicate the your air purifier is off.
Adjusting the fan speed
You can select the speed for the fan.
- Make sure that your air purifier is turned on.
- Press (fan speed) on or more times to adjust the fan speed. Your can select 1 (slow), 2 (medium), 3 (medium fast), 4 (fast), or Sleep mode.Each time your press , the speed indicator changes to match your selection.
Setting the timer
You can set a time when you want your air purifier to automatically turn off.
- Make sure that your air purifier is turned on.
- Press (timer) to select a turn-off time. You can select 1H, 2H, 4H, 8H, or 12H.Each time your press , the time indicator changes to match your selection.If you press when 12H is displayed, the timer turns off.
Troubleshooting
PROBLEM | SOLUTION |
My air purifier doesn’t work. | • Make sure that your air purifier is plugged in. • Make sure that the power outlet is working. • Make sure that your air purifier is turned on. • If your air purifier is plugged into a surge protector, make sure that the surge protector is turned on. |
My air purifier has poor air flow or is loud. | • Make sure that your air purifier is on a flat surface. • Make sure that nothing is blocking the air inlet and filtered air cover. Position your air purifier at least 1 foot (.3 meters) away from walls or large objects. • Check the condition of the filter. Replace it if it’s dirty. • Make sure that you remove the plastic bag from the filter. • Make sure that the filter is seated correctly. |
My filter doesn’t last the full lifetime. | • Excessive amounts of pet dander, dust, or smoke may decrease the life expectancy of the filter. |
My filter indicator is flashing blue. | • When the filter indicator flashes blue, you need to check and replace your filter. See Replacing the filter on page 10. |
Specifications
Dimensions (H×W×D) | 26.5 × 12.2 × 12.5 in. (67.2 × 31 × 31.7 cm) |
Weight | 17.9 lbs. (8.1 kg) |
Power input | 120V AC |
Power cord length | 6 ft. (1.8 m) |
Operating temperature | 40~110°F (4~43°C) |
Coverage area | 497 ft.2 (46.1 m2) |
HEPA filter lifetime | Three months |
HEPA filter dimensions (Height × Diameter) | 14.6 (height) × 10 in. (diameter) (37.2 × 25.5 cm) |
HEPA filter model number | NS-APFL2 |