Insignia NS-CMKC01 Coffee Maker Setup Guide

Insignia NS-CMKC01 Coffee Maker Setup Guide

IMPORTANT SAFEGUARDS

Basic safety precautions should be followed when using the coffee maker to reduce the risk of fire, electric shock, and/or injury to people.

1. READ ALL INSTRUCTIONS.
2.  Do not touch hot surfaces. Use handles or knobs when available.
3. To protect against fire, electrical shock, or injury to persons DO NOT immerse the cord, plug, or coffee maker in water or other liquid.
4.  Unplug from the outlet when not in use and before cleaning.
   1.  Allow to cool before putting on or taking off parts and before cleaning the coffee maker.
5.  Return the coffee maker to the nearest authorized service facility for examination, repair, or adjustment.
6. The use of accessory attachments not recommended by the coffee maker’s manufacturer may result in fire, electric shock, or injury to persons.
7. Do not use outdoors.
8. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
9.  Do not place on or near a hot gas or electric burner, or in a heated oven

SAVE THESE INSTRUCTIONS

POWER CORD SAFETY TIPS
DO NOT OPERATE THE COFFEE MAKER IF THE POWER CORD APPEARS TO BE DAMAGED, OR IF THE COFFEE MAKER WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.

• The marked electrical rating of the extension cord should be at least as great as the electrical rating of the
  coffee maker.
• The extension cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.
•  Never pull or yank on the cord or the coffee maker.
•  To insert the plug, grasp it firmly and guide it into the outlet.
• To disconnect the coffee maker, grasp the plug and remove it from the outlet. Do not pull on the cord.
• Before each use, inspect the cord for cuts and abrasion marks. If any are found, the coffee maker should be
  serviced and the cord replaced.
• Never wrap the cord tightly around the coffee maker, as this could stress the cord where it enters the coffee maker and cause it to fray and break.

PACKAGE CONTENTS

• Single-serve coffee maker
• Water reservoir filter
•  Brew basket
• K-Cup® capsule holder
• Drip tray with cover
• Quick Setup Guide

FEATURES

• One-touch control
• Removable K-Cup capsule holder
• Removable brew basket
• Removable drip tray
•  Brews up 14-ounces of coffee

UNPACKING YOUR COFFEE MAKER

1. Carefully unpack your coffee maker and all parts. Remove any tape, labels, or packaging materials.
2. Wash the water reservoir filter, drip tray, drip tray cover,K-Cup® capsule holder, and brew basket with warm, soapy water. Rinse well and dry thoroughly.
   Note: You can wash the water reservoir filter, drip tray, drip tray cover, K-Cup® capsule holder, and brew basket in a dish washer. Place the parts on the top rack and use a low temperature cycle.
3. Wipe the exterior surfaces of your coffee maker with a soft, moist cloth to remove dust particles collected during packing and handling. NEVER immerse your coffee maker,power cord, or plug in water or any other liquid.
4. Place your coffee maker on a solid, level, heat-resistant surface.

BEFORE USING

Before you use your coffee maker for the first time, we recommend that you pre-clean it by running the brew cycle
using water only.
Note: During the first few minutes of initial use, you may notice smoke or a slight odor. This is normal and should quickly disappear. It will not recur after you have used your coffee maker a few times.To pre-clean your coffee maker:

1. Place the water reservoir filter in the water reservoir.
2.  Fill the water reservoir to the maximum level, then close the lid.
3. Place the brew basket in place. DO NOT insert the K-Cup capsule holder.
4. Close the top cover on your coffee maker.
5.  Place a large cup or mug on the drip tray, beneath the brew spout.
6.  Plug the power cord into a power outlet.
   Note: Ideally, your coffee maker should be operated on its own circuit, separate from other appliances to avoid overloading the circuit.
7. Press the GROUND button. Your coffee maker heats, then dispenses the water.
8.  After the water is done brewing, your coffee maker automatically shuts off and is ready to use.

BREWING COFFEE USING A K-CUP® CAPSULE

1. Place your coffee maker on a dry, level, heat-resistant surface.
2.  Place the water reservoir filter in the water reservoir.
3.  Fill the water reservoir with 6 to 10 oz of water. The water levels are marked on the water filter. DO NOT place any liquid other than water in the water reservoir.
4.  Press the brew chamber release button on the top, front of your coffee maker to release the top cover.
5. If the brew basket is inside is the brew chamber, remove it.Place the K-Cup capsule holder into the brew chamber.
6. Insert a K-Cup® capsule into the capsule holder. NEVER remove or puncture the foil top of the K-Cup® capsule before inserting it into your coffee maker.
7. Close the top cover of your coffee maker. Make sure that it is completely closed.
   Note: If the top cover is not completely closed, the capsule puncturing mechanism does not puncture the K-cup capsule.
8.  Place a mug on the drip tray, under the brew spout.
9. Plug the power cord into a power outlet, then press the CAPSULE button. The brew cycle starts and the CAPSULE button flashes throughout the brewing cycle.

SPECIFICATIONS

• Measurements (H × W × D): 12 x 5.5 x 7.3 in (30.6 x 14 x 18.5 cm)
• Power: 1,000 Watts
• Voltage: 120V / 60Hz

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S.) or 01-800-926-3000 (Mexico) www.insigniaproducts.com

DOWNLOAD PDF

https://www.insigniaproducts.com/pdp/NS-CMKC01/8428802

Insignia NS-CMKC01 Coffee Maker Setup Guide