Insignia NS-CSPBT03 Bluetooth Speaker Manual
PACKAGE CONTENTS
- Bluetooth speaker
- USB cable
- Quick Setup Guide
FEATURES
- Stream high-quality music wirelessly
- The rechargeable battery lasts for six hours
- Hang it anywhere with the included carabiner
- Use as a speaker for your smartphone
Top view
CHARGING YOUR SPEAKER
- Connect the small end of your charging cable to the micro USB port underneath the cover of your speaker.
- Connect the other end to a USB charging port. Note: When the battery is low, the LED blinks red slowly. The speaker will have about 10 minutes of battery life left.
CONNECTING WITH BLUETOOTH
- Make sure that your Bluetooth device is turned on and within 33 feet (10 meters) of your speaker.
- On your speaker, press thebutton. Your speaker enters pairing mode, and the Bluetooth LED blinks. Your speaker remains in pairing mode for 30 seconds or until it pairs with a Bluetooth device. Note: Press and hold thebutton to return to pairing mode.
- Turn on your Bluetooth device and turn on Bluetooth. Set your device to pairing mode, then select NS-CSPBT03. See the instructions that came with your Bluetooth device for information about pairing.
- If you are asked for a password, enter 0000. When pairing is complete, the LED on your speaker lights solid blue.
USING YOUR SPEAKER
Listening to music
- Press thebutton on your speaker, then connect to your Bluetooth device.
- Begin playback on your Bluetooth device.
- Adjust the volume on your speaker by pressing the + or – buttons. Note: Use the controls on your Bluetooth device to control playback.
Taking a call
- Press thebutton briefly to accept an incoming call. The LED lights are blue and fade in and out. OR Press and hold thebutton to reject an incoming call. The LED blinks red once.
- Press thebutton during a call to end the call. The LED blinks red once.
TROUBLESHOOTING
No power
- Make sure that your speaker’s battery is charged.
- Make sure that your speaker is turned on.
No sound or low volume
- Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and “NS-CSPBT03” is selected.
- Turn up the volume on your speaker.
- Turn up the volume on your Bluetooth device.
- Make sure that your Bluetooth device is not muted.
- Make sure that your speaker is not paired to another Bluetooth device.
- Make sure that your Bluetooth device is not paired to another Bluetooth device.
Cannot establish Bluetooth connection
- Make sure your speaker is in pairing mode. If a connection has not been made in 30 seconds, the speaker exits pairing mode.
- Shorten the distance between your speaker and your Bluetooth device.
- Turn your devices off, then on. Repair your speaker and your Bluetooth device.
- Make sure that your speaker is not paired to another Bluetooth device.
- Make sure that your speaker and Bluetooth device are both in pairing mode.
- Make sure that your Bluetooth device supports the Bluetooth v4.0 protocol and below.
- Make sure that your Bluetooth device is not connected to any other device.
- Make sure that you have selected “NS-CSPBT03” on your Bluetooth device.
My Bluetooth device keeps unpairing
- Shorten the distance between your speaker and your Bluetooth device.
- If the battery on your Bluetooth device is low, recharge the battery.
- If the battery on your speaker is low, recharge the battery.
LEGAL NOTICES
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada)
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies. Registered in some countries. Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2015 Best Buy. All rights reserved. Made in China.
REFERENCE LINK
https://www.insigniaproducts.com/pdp/NS-CSPBT03-BL/3812109