Insignia NS-LED4W18 LED Tape Light Manual featured img

Insignia NS-LED4W18 LED Tape Light Manual

INSIGNIA-logo-PNG

Insignia NS-LED4W18 LED Tape Light Manual

Insignia NS-LED4W18 LED Tape Light Manual producyt img

PACKAGE CONTENTS

  • LED tape light
  • Double-sided tape
  • Quick Setup Guide

FEATURES

  • Premium white LEDs produce bright, natural light
  • Multi-step dimmer adjusts to the brightness level you want
  • Self-adhesive backing attaches to TVs, cabinets, or other spaces for quick, custom lighting
  • Reduces eye strain from TVs and monitors while enhancing image contrast
  • Lights powered through USB (on your TV or computer) or with a USB power adapter (not included)

Insignia NS-LED4W18 LED Tape Light Manual fig 1

USING YOUR TAPE LIGHT
Shortening your tape light

  • Use a pair of scissors to cut on a cut line. Cut lines are about 1.3 in. (3.3 cm) apart. Warning: Do not cut the silver solder markings. Only cut in the center of the copper-colored pads, as shown.
    Insignia NS-LED4W18 LED Tape Light Manual fig 2

Attaching your lights

  1. Peel the adhesive backing off the lights, then adhere to the lights where you want them.
  2. Attach the double-sided tape to the back of the light control, then adhere it where you want it. (optional)

Connecting to power

  • Place the tape light where you want it, then connect the USB connector to your TV, computer, or other USB power source.

Adjusting the lights
Note: Tape light will retain the last brightness setting used when turned off, then back on.

  • PressInsignia NS-LED4W18 LED Tape Light Manual fig 3(POWER) to turn the tape light on and off.
  • PressInsignia NS-LED4W18 LED Tape Light Manual fig 5(BRIGHT) orInsignia NS-LED4W18 LED Tape Light Manual fig 4(DIM) to increase or decrease the brightness. There are eight light levels.

SPECIFICATIONS

Input: 5V DC, 1A Minimum specifications for USB power supply (not included): 5V DC, 0.5A (1.0A or greater recommended)

  • Length: 4 ft. (1.2 m)

TROUBLESHOOTING

  • LEDs will not turn on.
  • Press the power button to make sure your light is turned on, then press (BRIGHT) to increase the brightness.
  • Make sure that your lights are connected to a working USB port or power outlet. If connected to a computer, turn on your computer.

LEDs flicker or turn on and off.

  • Make sure that your lights are plugged into a working power outlet or USB port. Try plugging it into a different power source.
  • Make sure that the cable is not damaged.

SAFETY INFORMATION

  • To avoid damage to the light strip, do not twist or bend the light strip 90° sharply
  • Do not cut the silver solder markings. Only cut in the center of the copper-colored pads
  • Do not plug in your lights when they are coiled. This can generate excess heat which can damage the product or connected device.

ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2016 Best Buy. All rights reserved. Made in China

REFERENCE LINK

https://www.insigniaproducts.com/pdp/NS-LED4W18/5777900

DOWNLOAD LINK

Insignia NS-LED4W18 LED Tape Light Manual

Leave a Reply