Insignia NS-MQP15W22K Charging Pad Manual
PACKAGE CONTENTS
- 15 W Qi Charging Pad
- DC power adapter with 6 ft. (1.8 m) cable
- Quick Setup Guide
COMPATIBILITY
Any Qi-enabled devices up to 15 W, including smartphones, headphones, and smartwatches.
FEATURES
- 15 W output designed to fast charge demanding next-generation devices
- Wireless design charges devices without cumbersome cords
- Blue LED shows that your device is charging
- DC power adapter with 6 ft. (1.8 m) charging cable.
PRODUCT OVERVIEW
USING YOUR CHARGING PAD
- Plug the power adapter into your charging pad and into a power outlet.
- Place your Qi-enabled device on the center of your charging pad with the screen facing up. If your device is quick charging, the
purple LED lights.
Note:
If the LED is red only, your device is not charging. CAUTION: Do not place objects between your device and the charging pad. See “TROUBLESHOOTING” for more information.
- Flat size (W×H): 12 × 2.75 in. (304.8 × 69.85 mm)
- Final folded size: 3 × 2.75 in. (76.2 × 69.85 mm)
TROUBLESHOOTING
The device not charging/LED is red only
- Make sure that your device is Qi-enabled.
- Make sure that your charging pad is connected to a working power outlet.
- Make sure that your device is positioned correctly on your charging pad.
- Make sure there are no objects between your device and the charging pad.
- Remove your device’s case. It may be blocking the wireless signal.
LED INDICATOR STATUS
LED | STATUS |
Blinking blue | Standby |
Solid blue | Charging |
Purple on | Quick charging |
Solid red | Insufficient input power |
Blinking red | Charging error |
Device charges slowly
- Your device may charge more slowly with the charging pad than with a charging cable. This is normal behavior.
- Make sure that your device is positioned in the center of your charging pad.
- Make sure there are no objects between your device and the charging pad.
CAUTION: Only use the cable with the attached power adapter that came with your charger. Using a different cable and adapter can decrease charging performance or damage your charger.
SPECIFICATIONS
Qi Wireless Charging Pad:
- Dimensions: 3.9 × 3.9 × 0.4 in. (10 × 10 × 1.1 cm)
- Input: DC 15 V/1.8 A
- Output: 15 W max.
Output: 15 W max.
- AC power adapter:
- Input: 100-240 V ~ 50/60 Hz 0.7 A
- Output: DC 15 V/1.8 A
LEGAL NOTICES.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
SAFETY INFORMATION
- Avoid dropping.
- Do not disassemble.
- Do not place metal objects between devices and the wireless charging pads.
- A thick protective case (≥ .2 in. [5 mm]) or a case that includes a magnet or metallic material, may not allow proper charging function.
- Keep the wireless charging pad away from any liquid or moisture.
- The maximum ambient temperature during use of this product must not exceed 113° F (45° C).
- Do not place this device in fire or other excessively hot environments.
- Must use the provided adapter for proper function, if not it may malfunction.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
- 1-877-467-4289 (U.S. and Canada)
- www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2022 Best Buy. All rights reserved.
REFERENCE LINK
https://www.insigniaproducts.com/pdp/NS-MQP15W22K/6460949