Insignia-NS-S6CCBK2 6-Sheet-Cross-Cut-Shredder Featured Image

Insignia NS-S6CCBK2 6-Sheet Cross Cut Shredder Setup Guide

Views: 68
Table of contents show

Insignia-logo

nsignia NS-S6CCBK2 6-Sheet Cross Cut Shredder Setup Guide

`insignia-NS-S6CCBK2-6-Sheet Cross Cut Shredder-Setup Guide-image-1FEATURES

  •  Shreds up to six sheets of paper at one time
  •  Destroys credit cards, small staples, and small paper clips
  •  Cross-cut size .2 × 1.3 in. (5 × 34 mm) protects sensitive data
  •  3.2 gal. (12 l) capacity wastebasket holds shredded waste and
    is easy to empty

SETTING UP YOUR SHREDDER

  1. Place the wastebasket upright on a level surface.
  2. Attach the shredder head to the basket. Make sure that it fits correctly.
    Note: Do not use plastic bags to line the wastebasket.
  3.  Connect the power cord to a power outlet. Do not use an
    extension cord.

USING YOUR SHREDDER

    • Slide the power switch to AUTO.

insignia-NS-S6CCBK2-6-Sheet Cross Cut Shredder-Setup Guide-image-3

  • Insert paper (up to six pages) or one credit card into the shredding slot. Your shredder automatically shreds what you insert.
    Note: Don’t put envelopes, adhesive material, newsprint, transparencies, laminated documents, continuous forms, cardboard, or hard and plastic materials (except credit cards) through the shredder. You can shred small staples and small paper clips, if they are attached to the paper you are shredding

insignia-NS-S6CCBK2-6-Sheet Cross Cut Shredder-Setup Guide-image-4TROUBLESHOOTING

My shredder isn’t working.

  • Make sure that the power cord is plugged into a working power outlet. If the power cord is damaged, replace it.
  • Make sure that the shredder head and wastebasket are positioned correctly.
  • Change the position of the paper as you insert it.
  • The paper may be too thin or crumpled for your shredder to recognize it.
  • Slide the switch to FWD.
  • Make sure that you only send six sheets of paper or one credit card through your shredder at a time.
    The cutter won’t stop.
  • Slide the switch to REV to remove extra paper or credit card from your shredder.
    My shredder is too noisy.
  • Make sure that your shredder is on a flat, level surface.

SPECIFICATION

  •  Dimensions (H×W×D): 14.7 × 12.1 × 6.9 in. (37.4 × 30.8 × 17.6 cm)
  • Cutting style: Cross cut
  • Entry width: 8.6 in. (22 cm)
  • Shred capacity: 6 sheets (75 g/m2 A4 paper)
  • Shred size: .2 × 1.3 in. (5 × 34 mm)
  • Shred speed: 2.2 m/min.
  •  Duty cycle: 4 minutes ON / 30 minutes OFF
  • Input: AC 120 V, 60 Hz, 2.0 A
  • Net weight: 7.9 lbs. (3.6 kg)
  • Basket capacity: 3.2 gal. (12 l)
  • Noise level (d b) @ Non-loading at 1 M distance: 70 dB
  • Security level: P-3

IMPORTANT SAFETY INFORMATION

Follow all warnings and instructions in the guide and as marked on the shredder. Do not attempt to service this unit by yourself.  Any repairs must be performed by qualified service personnel.

insignia-NS-S6CCBK2-6-Sheet Cross Cut Shredder-Setup Guide-image-7

  1. Keep in the OFF position when the shredder is not in use for prolonged periods of time.
  2.  Empty wastebasket frequently.
  3.  The document shredder must always be deactivated and disconnected from the electrical line prior to moving, transporting, and cleaning the device and prior to emptying the wastebasket .
  4. The device may not be operated with a damaged power cord.
  5.  For indoor use only.
  6.  To protect the machine, we suggest the user to operate it in this way: work 4 minutes then rest 30 minutes.
  7.  The machine allows a maximum shred six sheets paper (75 gsm) or one credit card at one time.
  8.  The socket-outlet must be installed near the equipment and must be easily accessible during use.

LEGAL NOTICES

FCC statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
following measures:

  •  Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the
    receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.
    CAN ICES-003(B)/NMB-003(B)

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

View Air Purifier For Insignia

CONTACT INSIGNIA:

For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com

Tags: , , ,

Leave a Reply