Insignia NS-SONIC20 Portable Speaker Manual
PACKAGE CONTENTS
PACKAGE CONTENTS- Sonic portable speaker
- USB charging cable
- Quick Setup Guide
FEATURES
- Wirelessly streams from any Bluetooth device up to 33 ft. (10 m) away
- Water resistant design (IPX5 rating) protects your speaker from water
- Rechargeable battery lasts up to 60 hours
- Speakerphone for hands-free calling
- Stereo speakers and passive radiator help deliver full sound
- True Wireless Stereo (TWS) lets you connect two Sonic speakers together to play left-and-right channel audio separately
Note: Works with Sonic speakers only, not MiniSonic speakers
LED INDICATOR
| LED | FUNCTION |
| Blinks blue quickly | Bluetooth pairing mode |
| Lights solid blue | Paired to a Bluetooth device |
| Blinks blue slowly | AUX play or AUX mute |
| Lights solid red | Speaker is charging (charging complete when LED turns off) |
| Lights blue / red / green | Call activated |
| Blinks green quickly | TWS pairing mode |
| Lights solid green | TWS connected |
CHARGING YOUR SPEAKER
- Connect one end of the USB cable to the USB port on the back of your speaker.
- Connect the other end of the USB cable to a USB port on your computer or wall adapter (not included). The
LED indicator is red while charging, then turns off when the speaker is fully charged.
Note: The speaker beeps continually when the battery is low.
CONNECTING AN AUDIO DEVICE
Bluetooth
- Press and hold (power) to turn on your speaker. The LED indicator blinks blue quickly and your speaker
automatically enters pairing mode. - Make sure that your Bluetooth device is within 33 ft.(10 m) of your speaker.
- Turn on your Bluetooth device, turn on Bluetooth, then enter pairing mode. For more information, see the
documentation that came with your Bluetooth device. - On your Bluetooth device, select Insignia Sonic. Your speaker pairs with your Bluetooth device and the LED indicator lights solid blue.
- To disconnect, un-pair your Bluetooth device from your speaker.OR Press and hold (Bluetooth) for two to three seconds on your speaker. Your Bluetooth device loses connection automatically.
3.5 mm audio cable
Connect a 3.5 mm audio cable (not included) from your speaker’s AUX jack to your audio device’s headphone/audio out jack.
The LED indicator blinks blue slowly while connected to an audio cable.
CONNECTING YOUR SPEAKERS WITH TWS
TWS lets you connect two Sonic speakers together to play left-and-right channel audio separately.
- sure that your Sonic speakers are near each other.
- Press (Bluetooth) twice on each speaker within one minute. Each speaker says “true wireless pairing” and
they pair automatically.
Notes:
- If one Sonic speaker is already connected to your Bluetooth device, press (Bluetooth) twice on this speaker. It pairs automatically with the other one.
- If both Sonic speakers are in paring mode, press (Bluetooth) twice on either speaker. It pairs automatically.
- After they are paired, the first speaker says “paired, please connect to your device” then the green LED blinks slowly.The other speaker’s green LED is on.
- On your Bluetooth device, select Insignia Sonic. After they are connected, the speakers say “left channel” and
“right channel”.
Note: If they do not pair, you may need to delete all Insignia Sonic speakers from your device and pair them again. - Press (power) twice. The speaker announces that it is either the left or right channel so you know which
side to place the speaker on.
Notes: - While TWS is activated, only the speaker that slowly blinks green can be used for phone calls. This speaker blinks blue/red/green when a call is active.
- TWS function does not support AUX input.
TAKING A PHONE CALL
Using your speaker
The following functions are available when paired to a phone with Bluetooth:
- Reject an incoming call:Press and hold (Play/Pause/Call).
- Answer an incoming call:Press (Play/Pause/Call).
- Switch audio between your speaker and phone during a call, or switch between two calls:Press and hold (Play/Pause/Call).
- End current call:Press (Play/Pause/Call).
- Redial the last dialed number: Press (Play/Pause/Call) twice.
TROUBLESHOOTING
No power
- Make sure that your speaker is plugged in.
- Make sure that your speaker is turned on.
No sound or low volume
- Make sure that your Bluetooth device is turned on,Bluetooth is turned on, and Insignia Sonic is selected.
- Turn up the volume on your speaker.
- Turn up the volume on your Bluetooth device.
- Make sure that your Bluetooth device is not muted.
- Make sure that your speaker is not paired to another Bluetooth device.
- Make sure that your Bluetooth device is not paired to another Bluetooth device.
Cannot establish Bluetooth connection
- Shorten the distance between your speaker and your Bluetooth device.
- Turn your devices off, then on. Re-pair your speaker and your Bluetooth device.
- Make sure that there is nothing plugged into the AUX jack.
- Make sure that your speaker is not paired to another Bluetooth device.
LEGAL NOTICES
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com
