Insignia NSSPBTWAVE2 Bluetooth Speaker Manual

Insignia NSSPBTWAVE2 Bluetooth Speaker Manual

PACKAGE CONTENTS

• Bluetooth speaker
• USB cable
• Quick Setup Guide

FEATURES

• Wirelessly stream from any Bluetooth device
• Rechargeable battery lasts up to 12 hours
• Speakerphone for hands-free calling
• Rubber feet support a horizontal or vertical orientation

Front view

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this speaker near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this speaker during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the speaker has been damaged in any way, such as if the speaker is dropped, exposed to liquids, or does not operate normally.
• Never expose the product to fire as this could result in personal injury.

CHARGING YOUR SPEAKER

1. Connect the small end of the charging cable to the micro USB port on the back of your speaker.
2. Connect the other end to a USB port on your computer or wall adapter (not included). The LED indicator is red while charging, then turns off when the speaker is fully charged. Note: The speaker beeps continually when the battery is low. About five minutes later, the speaker turns off automatically.

CONNECTING AN AUDIO DEVICE
Bluetooth

1. Press and hold(power) to turn on your speaker. The LED indicator blinks blue quickly and your speaker automatically enters pairing mode.
2. Make sure that your Bluetooth device is within 33 ft. (10 m) of your speaker.
3. Turn on your Bluetooth device, turn on Bluetooth, then enter pairing mode. For more information, see the documentation that came with your Bluetooth device.
4. On your Bluetooth device, select NS-SPBTWAVE2. Your speaker pairs with your Bluetooth device and the LED indicator lights solid blue.
5. To disconnect, un-pair your Bluetooth device from your speaker.
   OR
   Press and hold(call) for three seconds on your speaker. Your Bluetooth devices lose connection automatically.

RECONNECTING TO A PAIRED DEVICE

When your speaker is not paired to a device, the LED blinks blue.

USING YOUR SPEAKER

Listening to audio

1. Connect to your speaker with Bluetooth or an audio cable.
2. Play audio on your connected device.
3. Press + or – to adjust your speaker’s volume.
   Note: Make sure that your connected device’s volume is set to at least 50%.
4. Use the controls on your connected device to control playback.

TAKING A PHONE CALL
Using your speaker
The following functions are available when paired with a phone with Bluetooth:

• Reject an incoming call: Press and hold(call).
• Answer an incoming call: Press(call).
• Switch audio between your speaker and phone: Press and hold(call).
• End current call: Press(call).
• Redial the last dialed number: Press(call) twice.

SPECIFICATIONS

• Dimensions (H × W × D): 6.77 × 2.75 × 2.75 in. (17.2 × 7 × 7 cm)
• Battery size: 2,000 mAh
• Wattage: 3W
• USB cable length: 11.8 in. (30 cm)
• Range: 33 ft. (10 m)
• Run time: 12 hours
• Charge time: 4.5 hours
• Weight: 1.01 lbs. (0.46 kg)

LED indicator

TROUBLESHOOTING

LEGAL NOTICES

FCC statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications.

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RSS-102 Statement 
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme à l’exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.

IFETEL Statement
La operación de este equipo está sujeta a las siguientes dos condiciones: 1. es posible que este equipo o dispositivo no cause interferencia perjudicial y 2. este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar su propia operación no deseada.

ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com.

INSIGNIA is a trademark of Best Buy and its affiliated companies. Distributed by Best Buy Purchasing, LLC ©2015 Best Buy. All rights reserved. Made in China Dispose of batteries in the proper manner, according to federal, state, and local regulations.

REFERENCE LINK

https://www.insigniaproducts.com/pdp/NS-SPBTWAVE2-BK/6172765

DOWNLOAD LINK

Insignia NSSPBTWAVE2 Bluetooth Speaker Manual