Insignia NS‐FT10MT8 10″ Table Fan Manual
PACKAGE CONTENTS
- 10″ table fan
- Quick Setup Guide
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE IMPORTANT INSTRUCTIONS
- Use your fan only as described in this Quick Setup Guide.
- Do not use your fan if it works intermittently, stops working entirely, or parts are missing or damaged.
- To reduce the risk of fire or electrical shock, DO NOT use this fan with any solid-state speed control devices (such as a dimmer switch) or expose it to water.
- To help prevent electrical shock, do not immerse your fan, plug, or power cord in water or spray it with liquids.
- Close supervision is needed when your fan is being used near children.
- Unplug your fan before moving or cleaning it, or when it is not in use.
- Never insert fingers or other objects through the grill while the fan is running.
- Make sure your fan is on a stable surface during use so it won’t overturn.
- Do not use your fan in an open window. Rain may cause an electrical hazard.
- Do not use your fan near explosive or flammable fumes.
- Do not place your fan or its parts near an open flame, stove, or other heating appliance.
- Do not use your fan if the cord or plug is damaged. Throw your fan away or return it to an authorized service facility for examination and/or repair.
FEATURES
USING YOUR FAN
Speed selection
- 0 – Off
- 1 – Low
- 2 – Medium
- 3 – High
Oscillation
Push the oscillation knob down to start oscillation, and pull it up to stop.
Angle adjustment
- Loosen the adjustment knob.
- Adjust the fan to the angle you want, then retighten the knob.
REPLACING THE FUSE
If your fan stops working, you may need to replace the fuse (not included). Warning: Risk of fire. Replace the fuse only with a 5A, 125 Volt fuse. Do not force the fuse into place.
- Unplug the fan.
- Slide open the fuse access cover on top of the AC power plug.
- Remove the fuse.
- Replace the fuse, then slide the fuse access cover closed.
Caution: Do not replace the AC power plug. Discard the product if the plug is damaged.
CLEANING YOUR FAN
- Unplug the fan.
- Clean plastic parts with mild soap and a damp cloth or sponge. Thoroughly remove the soap film with clear water.
- Do not splash water or other liquid into the motor.
SPECIFICATIONS
- Dimensions (D × W × H): 9.5 x 11.1 x 15 in. (24 x 28.2 x 38.2 cm)
- Volts: 120V, 60Hz.
- Speeds: 3 speeds
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details or see your online User Guide.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies Distributed by Best Buy Purchasing, LLC 7601 Penn Ave South, Richfield, MN 55423 U.S.A. ©2016 Best Buy. All rights reserved. Made in China
REFERENCE LINK
https://www.insigniaproducts.com/pdp/NS-FT10MT8/5688518
