Nutribullet NBI50100 Immersion Black Blender User Manual
Troubleshooting.
BEFORE BLENDING:
UNIT ASSEMBLED BUT CANNOT POWER ON
If the unit is not operating, this may be due to parts not being fully locked in place. Check to make sure the attachment you are using is locked tightly onto the main body of the blender.
DURING OPERATION:
BLENDER STOPS (STUCK, NOT BLENDING, NOT OPERABLE)
In the unlikely event that the blending arm or whisk gets stuck and blending stops, release the power button, wait for the unit to shut off, and look at your mixture (the items you’re processing).
If the problem seems to be an overly thick mixture that caused the blade to stop moving, try adding water or other liquid to soften the mixture, or try separating the mixture by hand, or removing some of the mixture. Then try blending or whisking again on the loosened or thinned out mixture.
Also check the cutting area of your attachment (blade or whisk) to see if there is residue or food particle buildup; if so, rinse off with warm water, then try blending again.
If the blender still won’t operate, turn it off, unplug it, disassemble it, then reassemble it. After reassembly, power on the blender and see if normal function has been restored.
OVERHEATING
To avoid overheating, allow the Immersion Blender to cool down for at least 5 minutes between uses.
Care and maintenance
Cleaning the NutriBullet® Immersion Blender is quick and easy. All parts (except for the motor body) can be cleaned by simply rinsing with warm soapy water. Here are some tips for cleaning and best practices.
- Always make sure theunit is unplugged before you begin assembly, disassembly, cleaning, or storage of the
- Detachand separate the parts of the blender (see Disassembly section).
- Remove the contents ofthe mixing
- Cleanall blender parts (except the motor body) with warm soapy Do not soak parts in water as it may damage the internal gears.
CAUTION: Blending arm and whisk holder are NOT dishwasher safe. Do not place these parts in the dishwasher as it may damage the internal gears of these attachments.
CAUTION: Do not use a metal sponge to clean the parts, as that may scratch or damage them.
- Be sure to properly clean the blade or whisk every time you use Leftover traces of food can cause residue buildup on the blade or whisker, which may degrade blending performance or inhibit maximum blending.
CAUTION: Blade is sharp, so handle carefully during cleaning.
- Clean the motor body with a damp cloth
WARNING: Never immerse the motor body in water or other liquid.
- Let all parts dry thoroughly, then store the appliance and its attachments in a dry
PRO TIP: Clean your appliance as soon as possible after using it. If allowed to sit, food residue may dry on the blade or whisk, which can make it more difficult to remove. If any food residue does cake onto parts of the unit (other than the motor body), let those parts soak in hot water for 30 minutes, which should soften the residue and make it easier to remove.
How to store.
You can save blended or whisked contents for future use by putting them in a cup or bowl, covered by plastic wrap or other cover, and storing them in your refrigerator. When not in use, store the blender in a safe dry place where parts will not be damaged and won’t cause harm.
Replacement parts
To order additional parts and accessories, please visit our website at nutribullet.com/shop/accessories or feel free to contact Customer Service: 1 (800) 523-5993.
NutriBullet® Immersion Blender one-year limited warranty
LIMITED WARRANTY FOR NUTRIBULLET®
NutriBullet’s limited warranty obligations are confined to the terms set forth below:
NutriBullet, LLC (“NutriBullet”) warrants this NutriBullet® against defects in materials and workmanship for a period of one year from the date of original retail purchase. This limited warranty is valid only in the country in which the product is purchased and comes with the product at no extra charge, however shipping and processing fees will be incurred for returns, replacements and or refunds.
If a defect exists, and NutriBullet® is obligated under this limited warranty, at its option NutriBullet® will (1) repair the product at no charge, using new or refurbished replacement parts, (2) exchange the product with a product that is new or that has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original product, or (3) refund the purchase price of the product. A replacement product assumes the remaining warranty of the original product. A repaired product has a one- year warranty from the date of repair. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes NutriBullet’s property. When a refund is given, your product becomes NutriBullet’s property.
OBTAINING WARRANTY SERVICE
For limited warranty service, simply call our customer service department at 1-800-523-5993 or contact us via email from our website at nutribullet.com; click the Contact Us link, fill out and submit the customer contact form, and we will be glad to help you. When you contact our customer service department, you will be asked to provide your name, address, telephone number, and proof of the original purchase (receipt) containing a description of the product(s), purchase date, and the appropriate NutriBullet® serial number(s). Before sending your product for limited warranty service, please make sure to keep a copy of all relevant documents for your files (receipt, etc.). It is always recommended to purchase product insurance and tracking services when sending your product for service. Remember, shipping and processing fees will be incurred and are not covered by the one- year limited warranty.
Warranty registration
Please visit nutribullet.com/ warranty-registration or call 1 (800) 523-5993 to register your new NutriBullet® Immersion Blender. You will be asked to enter the Serial
Number* of your product, along with the purchase date and place of purchase.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering your product, you acknowledge you have read the instructions and understood the warnings as set forth in the accompanying instructions.
