Sharper Image Odyssey Toys BUMPER CARS User Manual

Sharper Image Odyssey Toys BUMPER CARS User Manual

SETTING UP THE BUMPER CARS

1. Turn off the power switch.
2. Use a Phillips screwdriver to open the battery cover.
3. Connect the battery wire to the Bumper Car’s connector as shown on the diagram
4. Close the battery compartment, reinstall the screw, and switch the power switch to ON.
5. Repeat this process for the other Bumper Car.

SETTING UP THE REMOTE CONTROL

1. Use a Phillips screwdriver to open the battery cover.
2. Install 2x new AA batteries taking care to match the correct polarity (+/-).
3. Close the cover and reinstall the screw.

CHARGING THE BUMPER CAR’S BATTERY

1. Remove the battery from the Bumper Car as shown in the Bumper Car setting up instructions.
2. Connect the battery to the USB charging cord connector.
3. Plug the USB cord into a 5vla USB charger.
4. The charger light will turn on to indicate charging. When the charger light goes out charging is complete and you can reinstall the battery. Tip. A full charge takes approx. 1hr

OPERATING THE BUMPER CAR CONTROLLER

For best results, the Bumper Cars need to be within a 15′ foot range of their respective controller.

Controller Functions

Bumper Car Movement

OPERATING THE BUMPER CARS
The object of the Bumper Car game is to eject your opponent’s action figure from their Bumper Car. To set up the game follow these steps

1. Assemble the action figure onto their color-matching Bumper Car. Align the slot on the seat of the Bumper Car with the corresponding locking peg on the action figure and press down firmly until they click together.
2. The side buttons on the Bumper Car activate the ejector seat below the action figure. The winner of the game is the first player to successfully bump into their opponent’s car and eject their opponent’s action figure.

CARE & MAINTENANCE

• Do not submerge the unit in any liquids.
• Keep the unit dry.
• Do not place the unit near powerful, un-shielded magnets.
• Do not expose the unit to extreme hot or cold temperatures.
• Do not hit, drop, or smash the unit with extreme force.
• Do not disassemble the unit for any reason.

CAUTIONS & WARNINGS

• Suitable for ages 8 and up. Adult supervision is always recommended.
• This product contains small parts which are a choking hazard. Keep away from small children.
• Manufacturers and dealers disclaim all responsibility for damage caused by misuse.
• Keep hair and loose clothing away from the Bumper Car when powered on.
• If Bumper Cars will be stored and unused for an extended period of time, please remove the batteries.
• Check the batteries regularly for potential leakage or corrosion that may occur.
• When installing the batteries carefully follow the polarity marking +/-.
• Do not mix different battery types.
• Remove exhausted or drained batteries.
• Do not exceed charging volts and amps of 5vla.
• Do not leave the charger connected or charge for more than 1hr.

NOT FOLLOWING THESE PRECAUTIONS WILL VOID YOUR WARRANTY.
FCC STATEMENT:
This product complies with Part 15 of the FCC Rules. Operation is aude this Seville mist aces any insert ence receiver incut can intern interfere cause undesirable operation.

REFERENCE LINK

https://www.sharperimage.com/view/product/RC+Bumper+Cars+(Set+of+2)/207642