Table of contents
show
Wizard ON-CHV21 WiFi Battery IP Camera User Manual
Interface
Front Panel
Back Panel
Mobile Phone App Instructions
- a. Scan one of the QR Codes below.
- b. Download the App from the App Store or Google Play
Network Configuration
Wireless Link New Camera to App
Power on the camera. Make sure the camera is in configuration mode. “The camera is now ready to begin paring.” * If not in configuration mode, long press the “Reset Button” for 5 seconds until you hear “System Reset”. Wait for the camera to restart, and enter into configuration mode. Choose “Setup Device” and follow the steps
Enter your Wi-Fi name and password. * It supports 2.4G Wi-Fi only. 5G Wi-Fi is not working
Set device name and password. * Password must be at least 8 characters.
Select the area.
- Non-Chinese mainland
- Chinese mainland
Add new camera successfully.
Device Setting
- Accept call
- Silence
- Notification
- Call in
- Share QR code
- Remove
- Album – App Album / System Album
- Switch – Common / Panorama (Cloud – When cloud storage is enabled)
- Cruise – Panoramic cruise
- Audio – Mobile speaker
- Settings – Device settings
Device Settings
Enable / Disable “Cloud Storage” in SD card setting page.
Main Specification
| Chipset | Hi 3518E |
| Wi-Fi | 2.4G 802.11 b/g/n |
| Storage | Support Max. 64GB TF Card |
| Recording | TF Card / Cloud |
| Resolution | 2.0MP – 1080P (1920*1080) |
| Audio | Full Duplex Audio |
| Alarm | PIR (Human body infrared sensor detection) |
| Visual Angle | 125° Super Wide Angle |
| Night Vision | 6pcs LED Lights, IR 3m IR-Cut |
| Protocol | TCP/IP, UDP, SMTP, DHCP, UPnP, P2P |
| Item Size | 68 x 42 x 65mm (L x W x H) |
| Battery | Li-Battery |
| Power | Stand-by: 160uA Working: 170mA |
| Certificate | ISO, CE, FCC, RoHS |
Thank you for choosing our product.
