Wizard-ON-VD007-1080P-Dice-Hidden-Camera-User-Manual-featured-img

Wizard ON-VD007 1080P Dice Hidden Camera User Manual

Wizard logo

Wizard ON-VD007 1080P Dice Hidden Camera User Manual

Wizard-ON-VD007-1080P-Dice-Hidden-Camera-User-Manual-prduct-img

Use Instructions

Place of Using the Device: Please strictly abide by relevant national laws and regulations, it is not allowed to use this product for illegal purposes, otherwise, any consequence shall be undertaken by yourself.

Product Properties

  1. It is designed without holes, and is configured with convenient mini pedant and portable DV;
  2. Format of motion detection /video recording video: AVI,1920*1080P@30fps;
  3. With a built-in 230mAh lithium battery, it can work for 60 minutes and be fully charged within 2 hours;
  4. It supports max 32GB Micro SD card.

The product is installed with a built-in lithium battery, please charge it (for 2 hours) through the following modes before using it for the first time:

  1. Connecting it with the computer via USB data cable;
  2. Connecting it with an external USB 5V charger/power bank

Notes:

  1. This product doesn’t support the function of recording video when charging;
  2. When detecting low battery, the product will automatically save the recorded video, and the turnoff after the blue indicator will flash 10 times;
  3. When charging, the red and blue indicators turn on, after charging, the red indicator turns off.

The product adopts a high-end intelligent video processing chip with one-key operation and full high-definition video recording, the resolution is 1920*1080 AVI format, it supports a 64G memory card, and It can smartly detect the memory card state and no operation state. After boosting, the device will automatically turn off within 60 seconds after the blue indicator has flashed 10 times when it has detected the memory card or is not operated.

Note:
The default state of the product is circular covering the recorded video, when the capacity of the memory card is less than 400MB, the system will automatically cover the previous video, (the file can’t be recovered after it is covered, please use this function with caution).

Structure of the Product

Wizard-ON-VD007-1080P-Dice-Hidden-Camera-User-Manual-fig-

Use and Operation

1080P video recording
Hold the ON/OFF button for 3 seconds to boot the product, The blue indicator keeps ON, and the system enters into a standby state, click the ON/OFF button once, and the blue indicator flashes for 3 seconds and then turns off, and the device enters into the video recording state (one video for 5 minutes), press the ON/OFF button again to stop recording and save the video, the blue indicator keeps ON, and the device returns to standby state.

Motion detection
When the blue indicator keeps ON and the system is under standby state, press the ON/OFF for 3 times, blueindicator flashes for 5 seconds and then turns off, the system enables the motion detection mode when detecting a moving object, and the blue indicator flashes quickly for 3 times and then turns off, the system enters into the video recording state (one video for 5 minutes), after recording, it automatically saves the video, and then enter into the motion detection standby. If there isn’t a moving object, the system will keep a standby state till turned off under low battery.

Enabling the infrared ray function

Under any state, press the ON/OFF for 2 times, the infrared ray function is enabled, then press it for 2timestodisable the infrared ray function. Note: Under standby state /motion detection state, hold the ON/OFF button for 5 seconds, and the blue indicator flash 10 times, the system will automatically save the video and then turn it off; when the system halts, it is invalid to press the button, and the device can’t work normally, please insert the sharp object in the Reset hole to reset the device, and then reboot the device.

Modify the system time

Create a text document (txt) with the name “user-config” in the root directory of the Micro SDcard, then compile the required time, the format of the text content is (Year-Month-Date-Hour: Minute: Second), for example 2017-08-04-10:03:00, insert the SD card in the device, boot the device, then the system will automatically upgrade the time, and then automatically turn off (after upgrading, the text document will disappear automatically)

Notes:

  1. Indicator state when upgrading the system time: insert the Micro SD card and then boot the device, under upgrading mode, the blue indicator keeps flashing till finishing the upgrade, and then the device will automatically turn off;2
  2. If the battery is used up, the system time shall be set when enabling the device again;
  3. Take out the memory card and connect it with the computer via card read to set the text document, or connect the device with the computer via data cable to set the text document.

Connecting with the computer
Under the ON/OFF state, the data can be read after connecting the device to the computer.

Components of the Product

  1. Camera ————-1PC
  2. USB Data Cable ——–1PC
  3. Use Instructions ————-1PC
Relevant Parameters
ItemsRelevant Parameters
Video FormatAVI
Video CodingM-JPEG
Resolution of Video1920*1080P
Video Frames30fps
Play SoftwareThe self-contained program of the operation system or main video play software

 

(Storm Player is recommended)

Support SystemWindows; XP; Mac os; Linux
Battery CapacityHigh capacity polymer lithium battery, 230mAh
Working DurationAbout 60min, fully charged within 2 hours
Charging VoltageDC=5V
Type of InterfaceMini 8Pin USB
Support Memory CardExternal Micro SD card

Troubleshooting

  1. The device doesn’t boot or turn off after booting: low battery possibly, please charge the device for 2 hours and then boot it again;
  2. The device doesn’t record video after booting: please check if there’s a Micro SD card, or format the card in the computer, and then insert it into the device;
  3. Video is played unsmooth or blank screen after connecting with the computer: check the configuration of the computer, and see if there is the problem of player, it is suggested to adopt a Storm player, or take out the SD card, read the data with the card reader;
  4. The device doesn’t respond when charging: Replace the USB data cable or charger, or directly connect it to the computer.

REFERENCE LINK

https://wizard-tk.com/

Leave a Reply