AFTERSHOKZ Open Move Open-Ear Headphone User Manual

AFTERSHOKZ Open Move Open-Ear Headphone User Manual

Overview

Multifunction Button

Multifunction Button

How to Set Up OpenMove

Charge
Charge the headphones with the included USB-C charging cable. The LED indicator will change from red to blue when charging is complete.

Pair
Begin with your headphones powered off. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.

Connect
Open your device’s Bluetooth® menu and select “OpenMove by AfterShokz.” Audrey will say “connected” and the LED indicator will flash blue one time. Let us take care of you! Protect your headphones against defects. Make sure to register your OpenMove at Aftershokz.com

Multifunction Button (A)

Volume+ / Power Button (B); Volume- Button (C)

Specifications

Multipoint Pairing

Multipoint pairing allows OpenMove to be connected to two devices at once, allowing users to seamlessly transition between the two.

1. Begin with your headphones powered off.
2. Press and hold volume+ until Audrey says “pairing* and the LED indicator flashes red and blue.
3. Press and hold the multifunction button and volume+ button for 3 seconds. Audrey says “Multipoint enabled”.
4. Open your first device’s Bluetooth® menu and select “OpenMove by AfterShokz.” Audrey says “Connected”.
5. Turn your headphones off.
6. Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
7. Open your second device’s Bluetooth® menu and select “OpenMove by AfterShokz.” Audrey says “Connected”.
8. Turn your headphones off.
9. Turn your headphones on. Your headphones are now connected to both devices. Audrey says “connected” and “device 2 connected”.
10. To turn off multipoint pairing: Press and hold the multifunction and volume – buttons for 3 seconds when pairing. Audrey says multipoint disabled”.

More information: bit.ly/aftershokzpairing

How to Reset Your Headphones

1. Begin with your headphones powered off.
2. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
3. Press and hold the multifunction button, volume+ button, and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.
4. Turn your headphones off. OpenMove is now reset and can be re-paired to vour device.

Optional Accessories
Earplugs (D) Use earplugs with headphones in environments where it is safe to block out ambient noise, such as on a train or airplane.

1. Roll earplugs firmly between fingers and place them in ears.
2. To adjust EQ settings for earplugs, press and hold the volume+ and volume- buttons simultaneously while music is playing. Continue through options until “earplug mode.”
3. Switch EQ to other settings when you take out the earplugs.

REFERENCE LINK