Outdoor Tech Buckshot 2.0 Rugged Wireless Bluetooth Speaker Manual
WHAT’S INSIDE
Micro USB Cord and instructional manual are also included in the packaging.
ANATOMY
POWER UP
TO CHARGE
- Connect the included Micro USB cord to a power source and the charging port on the Buckshot 2.0. When charging, the red LED light will stay activated. ***Full charge time is about 4-5 hours.
- When the Buckshot 2.0’s is fully charged, the RED light will turn off. The displayed battery meter is supported for Apple products.
- The Buckshot 2.0’s Bluetooth and music functions can still operate while charging.
PAIRING MODE
Power On / Off
ON: Hold the MFB for 2-3 seconds or until the LED light flashes blue and the voice prompt states “Power on”
OFF: Hold the MFB for 3-4 seconds or until the LED light turns red and the voice prompt states “Power off”
Enter Pairing Mode
When powered on, it will enter into pairing mode automatically. Hold the MFB for 2-3 seconds or until you see the LED light flash red/blue and the voice prompts states “Power on, Pairing.” The LED lights will then flash red and blue alternately.
Pairing Buckshot 2.0 to Device
Open the Bluetooth settings on your device. If you have put your Buckshot 2.0 into pairing mode, it should be listed as “ODT Buckshot 2.0” as an available device to pair. Connect with the Buckshot 2.0. The voice prompt will state “Connected” if the Buckshot 2.0 and your device connected. The blue LED light will flash for as long as the device is connected and on.
MUSIC FUNCTIONS
PHONE FUNCTIONS
MOUNTING OPTIONS
SPECS
- Rating: IPX6
- Bluetooth v 3.0
- Bluetooth Profiles: HFP. A2DP, AVRCP
- Capatability: Bluetooth v 1.1 and above
- Operating range: 60 ft
- Device name: ODT Buckshot 2.0
- Power source: Lithium ion rechargeable battery cell
- Battery capacity: 1500 mAh
- Playing Time: Up to 20 hrs
- Operating Temperature: 0~45° C
- Storage Temperature: -20~60° C
- RoHS: Fully RoHS compliant
CARE & MAINTENANCE
- Do not access the input/output simultaneously. It may affect the product’s performance and not charge properly.
- Use a soft, dry cloth to wipe the surface.
- Do not use intensive chemical products or detergent to clean the product.
- Charge the product at least once every three months, to prevent the batteries from drying out.
- It is normal for the battery to heat up during its charge. The temperature should be below 45° & does not affect the Buckshot 2.0s performance.
- For best performance, fully charge the Buckshot 2.0 before charging other devices.
- All products have passed the strict quality inspection, Do not use the battery/device if it gives off an odor, generates heat, becomes deformed, abrasion, damaged or appears abnormal in any way
REFRENCE LINK
