Ozeri OZH1 Dual Zone Oscillating Heater with Remote Manual

Ozeri OZH1 Dual Zone Oscillating Heater with Remote Manual

GENERAL SAFETY

Thank you for purchasing the Ozeri Dual Zone Ceramic Heater and Fan. This product has passed extensive quality assurance tests for residential use. Every care has been taken to ensure that it reaches you in perfect condition. Warning: When using electric appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and personal injury, including (but not limited to) the following: Read all these instructions before attempting to operate this product and save these instructions for future reference:

IMPORTANT SAFETY INSTRUCTIONS BEFORE USING
THIS APPLIANCE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL AND ON THE APPLIANCE

WARNING

THE HEATER AND THE REMOTE CONTROL BOTH CONTAIN MAGNETS:

• Pacemakers and defibrillators may be affected by strong magnetic fields. If you or someone in your household has a pacemaker or defibrillator, avoid placing the remote control in a pocket or near the device.
• Credit cards and electronic storage media may also be affected by magnets and should be kept away from the remote control and the top of the heater.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

• This heater is hot when in use and for a short period after use. To avoid burns, do not let bare skin touch hot surfaces. When moving the heater, hold it by the base, not the air loop amplifier.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains, at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear when the heater is plugged in.
• Extreme caution is necessary when any heater is used by or near children or infirm persons and whenever the heater is left operating and unattended.
• Do not allow it to be used as a toy. Close attention is necessary when used by or near young children. Children should be supervised to ensure that they do not play with the heater or remote control.
• This heater and remote control are not intended for use by young children or infirm persons with reduced physical, sensory, or reasoning capabilities, or lack of experience and knowledge unless they have been given supervision or instruction by a responsible person concerning the use of the heater to ensure that they can use it safely.

TECHNICAL SPECIFICATIONS

• Model OZH1
• Name Ultra-thin heater
• Voltage / Frequency 120V / 60Hz
• Power Low:800W / High:1500W
• Wind speed ≥ 1.3 m/s
• Oscillation 76º
• Timer 1-12 hours
• Noise level ≤50dB（1m distance）
• Tip-over Protection 40 ± 10°
• Size Φ260*845 mm
• Net Weight 4.3 kg
• Gross Weight 5.2 kg

FEATURES

1. Ultra-thin profile with an elegant glass base that reduces accidental tip-over.
2. Dual PTC ceramic heating system that provides 2 independently controllable heating zones.
3. Room temperature range from 59°F to 95°F.
4. An intelligent thermostat adjusts output according to the ambient temperature.
5. Winter warming ceramic heating power of 800W (low) / 1500W (high).
6. Summer cooling fan function that provides refreshing air during hot summer periods.
7. The new DC motor generates warming and cooling air with a lower noise coefficient.
8. Touch-button control panel with illuminating LCD and temperature display.
9. Extended range remote control. 10.76° oscillation with a programmable 12-hour timer (for both heater and fan functions).
10. Low and high-speed settings (for both heater and fan functions).
11. Automatic overheat protection for both heating elements.
12. Automatic tip-over safety switch.
13. Dismountable dustproof filters allow for easy cleaning.
14. Easy-carry recessed handle.
15. Height of 85 cm / 33.5 inches.

COMPONENT LIST

1. Operating Panel
2. LCD Display
3. Power Button
4. Grill
5. Air Outlets
6. Tower Body
7. Back Cover
8. Base Stand
9. Master Power Switch
10. Filter Cover
11. Filter
12. Power Cord
13. Carrying Handle
14. Locking Nut

Assembly

Unpack the heater and check that you have the main heater, the glass base, and the remote control unit. Place the main heater flat on the ground (laying on its side) and remove the locking nut from the bottom end. Connect the glass base to the bottom, and secure it together with the locking nut. Note: Ensure the locking nut is firmly secured before standing the heater up on its base.

REPLACING BATTERY

Your remote control is powered by an included CR2032 Lithium battery. To replace the battery, pull out the battery holder and insert a new battery. Ensure that the polarity is correct and then insert the battery holder back into the remote control (Fig 3).

When the heater’s power is on, the remote control can be used to operate the heater from up to 20 feet away. Note: if there are two or more heaters within this distance, both will be operated by the same remote control. If the remote control will not be used for a long period of time, remove the batteries from the battery compartment

OPERATING THE HEATER

This heater and fan can be operated via the built-in touch control panel, and via the remote control device. Before using this device, read through and follow all safety warnings printed in this manual.

Control Panel Overview:
To use the built-in control panel, first press the master power switch located behind the fan towards the bottom (see point 9 on page 5). A deep sound will confirm that the master switch has been engaged. Then press the power button located at the top of the device (see point 3 on page 5). The following touch control buttons will illuminate the control panel:

The following indicator icons will illuminate immediately above the control panel’s touch buttons. The indicators icons will activate based on the settings you choose via the touch buttons.

Indicator Icon Overview:

Indicator Icon Functions:

Using the control panel’s buttons, press Heater (1) to turn on the top heater, and Heater (2) to turn on the bottom heater. Continue to press each to cycle through each heater’s off, low, and high settings. The following icons will appear:

• Indicates the heater will release air at the low-speed setting.
• Indicates the heater will release air at the high-speed setting.

To activate the heater’s thermostat, press the Temp/Timer icon: The room temperature display will flash on the screen. Press the press buttons to set the thermostat to your desired heating temperature. The heater will remain until it detects the room temperature equals the thermostat temperature.

To activate the fan without the heating element, press the minus to the lowest possible setting of 59°F, and then press the minus button one more time. The screen will show the following icon to confirm that it is in fan mode.

The device can also be controlled via the included remote control. The remote control has 7 buttons that perform the same function as the main control panel. When using the remote control, point it towards the control panel in the middle of the heater.

MAINTENANCE

This device features 2 removable air filters. The air filters are designed to capture dust and airborne dirt, and should be inspected and cleaned once a month, or as needed on a periodic basis. The accumulation of excess dust and dirt in the air filters can negatively affect the performance of this device. Before attempting to clean, always turn off the device by switching the master switch off on the back of the device first. Then unplug the device’s power cord from the wall outlet.

1. Ensure that the above instructions were followed by turning off the fan and unplugging it from the outlet first.
2. Wipe the surface and outside of the device by using a damp soft cloth. Do not immerse in water and never use thinners or other cleaning solutions as these may damage the fan’s surface appearance.
3. Remove and clean the filter covers first with a duster and then wipe away any excess dust with a damp soft cloth. Ensure that the filter covers are completely dry when finished.
4. Remove the air filters as shown in the following illustration. Clean the air filters by immersing them in clean water for several minutes. Ensure that the air filters are allowed to dry completely when finished.
5. Once thoroughly dried, place the cleaned air filters back into the device and assemble them securely with the filter covers, as shown in the illustration below.

WARRANTY INFORMATION

Should your scale prove defective within 2 years from the date of purchase, return the defective part or unit, freight prepaid along with an explanation of the claim to “Ozeri Scale.”

Please pack your scale carefully to avoid damage in transit. Under this warranty, Ozeri will repair or replace any parts found to be defective due to a manufacturer’s defect. There are no warranties other than that expressly set forth herein. This warranty is not transferable. Ozeri is not responsible in any way for damages, losses, or inconveniences caused by equipment failure or by user negligence, abuse, or use not in accordance with the “User Guide” or any additional safety, use, or warnings included in the product materials.

Further, Ozeri is not liable for incidental or consequential damages of any nature resulting from the use of this product and any liability shall not exceed the purchase price of the product. This Warranty gives you specific legal rights. You may also have other rights which vary from state to state.

THIS WARRANTY DOES NOT APPLY TO THE FOLLOWING

• Damage due to accident, misuse, abuse, alterations, or vandalism.
• Improper or inadequate maintenance.
• Unauthorized modification or commercial use.
• Damage in return transit.
• Unsupervised use by children under 18 years of age.

Ozeri Customer Service:
Phone: 1-877-299-1296
Email: support@ozeri.com

(OzeriTM and its subsidiaries assume no liability for damage caused by the use of the Ozeri Scale other than for its intended use or as instructed above and in the User Manual.)

REFERENCE LINK

https://ozeri.com/oscillating-fans/Ozeri-Dual-Oscillating-Heater-with-Remote/B0128J60C2

DOWNLOAD LINK

Ozeri OZH1 Dual Zone Oscillating Heater with Remote Manual