Table of contents
show
PYLE P2203ABTU Bluetooth Amplifier User Manual
Foreword
Thank you for purchasing this amplifier. Please read this operating instructions carefully before using. It will acquaint you fully with all its features and help you enjoy your time.
The product adopts the most advanced digital technique in the world.The brings you the first ever hybrid Amplifier with designed Sub out and Pre out to adjust to every situation.
FEATURES
- High-Powered Hybrid Preamplifier Receiver
- Built-in Bluetooth for Wireless Music Streaming Powers up to (4) Speakers
- AM/FM Radio with VFD Digital Display
- USB Flash Drive & SD Memory Card Readers
- MP3 Digital Audio File Support
- Connect & Stream Audio from External Devices
- Aux (3.5mm) Input Jack
- (2) 1/4’’ Microphone Inputs
- Headphone Jack, 1/4’’
- RCA (L/R) Audio Connectors
- Screw-Type Speaker Terminal Binding Posts Volume, Subwoofer, Tone, Echo, Mic. Volume Controls Front Panel Button Control
- Center
- Built-in Cooling Fan
- 2.4G Bluetooth antenna
- Bass, Treble, Balance control
BLUETOOTH CONNECTIVITY
- Receives Wireless Signal for Audio Streaming Works with All of Your Favorite Devices
- (Smartphones, Tablets, Laptops, Computers, etc.) Bluetooth Version: 2.1
- Bluetooth Network Name: ‘Pyle Audio’ Bluetooth Wireless Range: 20+ Ft.
- Bluetooth Network Password: – Not required
FRONT PANEL
- POWER SWITCH
Press to switch the power unit ON or OFF - PREV
This button is used to select the previous station in system - NEXT
This button is used to select the next station in system - MENU CONTROL
This is used to Increment end decrement level for the selected function of Mister Volume, Bass. Treble, Balance. Auto station seek. - INPUT
This is used to select the input sources such as DVD/CD, TUNER, MP3, USB, and BLUE-TOOTH - SUBOUT VOLUME CONTROL
- MASTER VOLUME CONTROL
Adjusts the volume level. Turn the button clockwise to increase the volume - ECHO CONTROL
Turn the knob to adjust the MIC echo level - MIC TONE
Adjusts the tone of MIC - MIC VOLUME
Adjusts the volume level. Turn the knob clockwise to increase the MIC volume - LED
Adjust the blue lights and blue rings - A/E SPEAKERS OUTPUT SELECTOR
Three modes: A. B. A+B - FUNCTION DISPLAYED FLUORESCENT WINDOW
- AM/FM/USB/SD SELECTION
Press it to select AM/FM when in Tuner input, Press it to select USB/SD when in USB input. - AUTO SCAN
AM/FM auto scan selector, scan and store stations automatically .Can store 30 stations - MIC INPUT JACKS 1/2
KARAOKE MIC connect to these jacks - HEADPHONE JACK
Headphone connect to this jack - MP3 JACK
MP3 connect to this jack - USB/SD inputs
Insert USB flash driver or the SD card
REAR PANEL
- TUNER ANT
Connect for AM and FM antenna - AUDIO INPUT JACKS
Connect the audio output jacks of DVD/CD to these jacks - RECLINE OUTPUT JACKS
Connect the RECORD input jacks to these jacks. - PRE OUTPUT JACKS
Connect the professional input jacks to these jacks - SUBWOOFER OUTPUT JACKS 1&2
- A B (Right) SPEAKER OUTPUT TERMINALS
Connect your speaker system to these terminals. - A B (Left) SPEAKER OUTPUT TERMINALS
Connect your the other speaker system(s) to these terminals. - COOLING FAN
- 110V/220V SWITCH
According to power voltage push this button to switch between 110V and 220V - POWER CORD
Connect to AC 110V/60Hz & 220V/50Hz outlet. - BLUETOOTH ANTENNA
This is the 2.4G bluetooth antenna
TECHNICAL SPECS
- MAX Power Output: 2000 Watt
600 Watt @ 2 Ohm
460 Watt @ 4 Ohm
240 Watt @ 8 Ohm - Frequency Response: 40Hz-15kHz, +/-2dB
Impedance: 8 Ohm
S/N Ratio: >76dB
T.H.D.: <1% - Radio Station Memory Presets:
The unit can save maximum 30 stations if more than 30 stations are available. - Tuner:
Quartz Synthesized Radio - Maximum USB/SD Flash Support Size:
32GB - Power:
110/220V, Switchable - Dimensions (L x W x H):
19″ (w)x13.2″ (d)x3.5″ (h) - Unit Weight:
15.6 lbs
REMOTE CONTROL
- 1 AUTO
Automatically search the signal source when power on - 2 DIGITAL
Tuning AM/FM number button - (3/27) TREBLE-/TREBLE+
Master treble down and up - (4/25) L/R
Left/ Right Balance Control - (5) MUTE
Mute Selector - (6/23) BASS- / BASS+ Master bass down and up
- SPEAKER
Speaker (A/B/A+B) selector - DSP
Music DSP selector - AUTO SCAN
AM/FM auto scan selector, scan and store station automatically. Can store 30 stations - AM
Multi-functional key. It is AM selector when it is TUNER mode. - MEMORY
After a station has been found, store the station by press-ing the MEMORY button. The screen will display SAVE. - (12/17) PREV & NEXT
Station preview and next selector - ST/MONO
Stereo and mono selector - (14/15) TUNING- TUNING+
The two keys are used to adjust to the best signal of the stations - (16) LED
Led mode selector - (18/20) VFD- VFD+
VFD down and up selector - (19) FM
Multi-functional key. This is FM selector when it is in TUNER mode. - (21) OFF
Music DSP off selector - (22) LOUD
Press the button to increase both bass and treble (24/26) VOL- VOL+ Master volum down and up - (28) DVD/CD /TUNER /BLUETOOTH /MP3/USB Signal input selector
REMOTE CONTROL OPERATION
- Remote control should be operated within 6 meters and a scope of 30 degrees in front of receiver.
- Make sure that there are no large obstacles between remote control and machine.
- Remote sensor should be far away from the light, high amounts of light can affect its performance.
SAFETY PRECAUTION
Read all documentations carefully before operating the equipment. Retain this manual for future reference. Follow all instructions printed on unit for proper operation.
- Do not open cover (or back cover) to reduce the risk of electrics shock or fire.
- There are no user serviceable parts inside. Refer to Servicing to qualified service personnel.
This symbol is used to alert the operator to the presence of important Operating instructions and precautions detailed in the documentation manual. - This symbol is used to warn operators that uninsulated dangerous volt-ages are present within the products enclosure that may pose a risk of electric shock.
Warning: To avoid fire or risk of electric shock, do not expose this unit to rain or moisture.
NOTES:
- Make sure power outlet conform to the power requirements listed on the back of the unit.
- Main voltage must be correct and the same as that printed on the rear of the unit.
- Do not use the unit if the electrical cord is frayed or broken.
- The unit shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases, shall be placed on unit.
- The unit shall be connected to a mains socket outlet with a protective earth connection.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
