Table of contents
show
RYOBI P7181 STICK VACUUM WITH ROLLER BAR MANUAL
NOTE:
These instructions supplement the REMOVING THE ROLLER BRUSH FOR CLEANING instructions in your operator’s manual. For complete assembly instructions, refer to page 6 of the Operator’s Manual.
WARNING:
This insert sheet is not a substitute for reading the operator’s manual. To reduce the risk of injury or death, users must read and understand the operator’s manual before using this product.
Your vacuum cleaner comes with a general-purpose roller brush preinstalled and a replacement roller brush designed to clean high-pile carpets only. Follow these steps to clean or replace a roller brush:
- Remove the battery pack and allow the roller brush to STOP. Remove the roller bar assembly.
- Rotate the end cap counterclockwise to unlock and remove the roller brush.
- Clean the roller brush. Cut any threads or hair wrapped around the roller brush. For peak performance, routinely clean the roller brush. Install either roller brush. Rotate the end cap clockwise to lock it in place.
- – Roller bar (barre à rouleau, barra giratoria)
- B – End cap (capuchon d’extrémité, tapa del extremo)
- C – Roller brush (general purpose) [brosse à tapis (pour le but général), cepillo giratorio (para
- usos generales)]
- D – Roller brush (for high pile carpets only)[brosse à tapis (pour les tapis à poils longs seulement), cepillo giratorio (solo para alfombras de tejido largo)]
- A. Tangled threads and hair (fils et cheveux emmêlés, hilo y pelo enredados)
- B – Roller brush (general purpose)[brosse à tapis (pour le but général), cepillo giratorio (para usos generales)]
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622
1-800-525-2579
www.ryobitools.com
REFERENCE LINK
https://promotions.ryobitools.com/210120_stick-vac_p7181k/
