Table of contents
show
Perixx Perimice-713 Wireless Ergonomic Vertical Mouse User Guide
Product Illustration
- Left Click Button
- Right Click Button
- Scroll Wheel/Middle Click
- DPI Switch
- Forward(Browser)
- Backward(Browser)
- Sensor
Product Specification
| Color | Black |
| Interface | PERIMICE-513: meets with USB 2.0 and HID 1.1 specifications |
| PERIMICE-713: 2.4 GHz Wireless | |
| Electrical Rating | PERIMICE-513: l00mA (Maximum) |
| PERIMICE-713: l0mA (Maximum) | |
| Operating Voltage | PERIMICE-513: 4.75-5.25 VDC |
| PERIMICE-713: 3.0 VDC | |
| Weight | PERIMICE-513: 145± 5g |
| PERIMICE-713: 102± 5g | |
| Material | PC/ABS(Body) Rubber(Wheel) Receiver Body(ABS) |
| OS requirement | Win XP and above |
| Button | 6 Buttons and 1 Scroll Wheel(PERIMICE-713 is with Power Switch on mouse bottom) |
Power Saving Mode
Power Saving mode helps to consume minimum power (when kept on) by turning off signal connection when the mouse is in Idle Mode and increases the battery life.
Mouse
| Active Mode | Static Mode | Power Saving Mode | |
| Stop Working Time | – | 2 Sec | 10 Sec |
| Current Consumption | <10mA | <5mA | <1.8mA |
| Power Saving Mode II (LED flash slowly) | |
| Stop Working Time | 6 Minutes |
| Current Consumption | <0.5mA |
| Deeply Sleeping Mode (LED off) | |
| Stop Working Time | After 8 Minutes |
| Current Consumption | <0.3 mA |
When the mouse is in power saving mode, click on any mouse button to reconnect. 2pcs of brand-new AAA battery (1100 mAh) provides up to 80 days of use when you use about two hours a day.
Connection Setup
- Remove the battery from the device (Reset Only)
- Insert the battery, and turn it on
- Insert the USB Receiver
- The device should work after a few seconds. If not, please repeat from step 1.
