Eufy Pet Care Cat Water Fountain User Manual
IMPORTANT SAFETY
- When the device is not in use, the power should be turned off.
- The power should be turned off while cleaning the base. Ensure that it is fully dry before use.
- Make sure the water level in the tank is between the “MIN” and “MAX” water line which is marked inside the main body.
- The transparent cover is detachable. DO NOT lift the device by the cover when moving it.
- Replace the Purification Filter and Sterilization Filter every 1.5 months.
- Excess impurities on the filter will reduce water quality and lower the water penetration speed. We recommend cleaning the filters each time you clean the device.
WHAT’S IN THE BOX
AT A GLANCE
Inside View
Sterilization Filter
GETTING STARTED
- Place the sterilization filter in the filter cover and press down it until it sits at the bottom. Place the filter in the purification filter cover.
- Align the filter cover with the groove under the drinking tray and turn it counterclockwise until it locks in place.
- Insert the head of the water pipe into the side outlet of the drinking tray. Make sure the water pipe is inserted correctly.
- Pour water into the main body. Make sure the water level is between the “Min” and “Max” water lines that are marked on the inside.
- Align the drinking tray with the main body as illustrated until it clicks into place.
- Attach the transparent cover onto the main body by pressing it down until it is fixed into place.
USING
PETCARE WATER FOUNTAIN
- Connect your PetCare Water Fountain to a power outlet using the provided USB charging cable and adapter (5V/1A).
- After it is powered on, the PetCare Water Fountain will continuously dispense water.
Note:
When the water level is lower than the MIN water line, the pump will stop working. It will resume normal operation after the water is filled.
MAINTENANCE
For optimal performance, follow the instructions below to clean and maintain your PetCare Water Fountain regularly. Cleaning or replacement frequency will depend on your usage habits.
| PetCare Water Fountain Part | Cleaning Frequency | Replacement Frequency |
| Sterilization filter | Once every week | Every two months |
| Purification filter | Once every week | Every two months |
| Water pump | Once every week | Replace after it is damaged |
SPECIFICATIONS
- Dimension: 200 mm (Width) × 200 mm (Depth) × 207 mm (Height)
- Net Weight: 750 g / 50 oz
- Material: ABS
- Capacity: 1.5L
- Input: 5V 1A
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type T8790 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: https://uk.eufylife.com/. The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device to strong sunshine or a too wet environment. The suitable temperature for the product and accessories is -20°C to 60°C. When charging, please place the device in an environment that has normal room temperature and good ventilation. It is recommended to charge the device in an environment with a temperature that ranges from 5°C~25°C.
CUSTOMER SERVICE
Warranty
12-month limited warranty
Call Us
United States
+1 (800) 988 7973 Mon-Fri 9 AM-5 PM (PT)
United Kingdom
+44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany
+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00
Email Us
Customer Support: support@eufylife.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
REFERENCE LINK
https://us.eufy.com/products/t7320121
