Plantomgogo A10 Electric Scooter User Manual

Plantomgogo A10 Electric Scooter User Manual

Safety Precautions

1. Please carefully read the User Manual, which will assist in explaining the basic working principles and provide tips on how to best enjoy your scooter experience.
2. Please wear all appropriate safety and protective gear as previously mentioned in the User Manual before operating the scooter.
3. Always wear shoes, make sure to wear comfortable clothes.
4. Do not use any accessories or additional items not approved by the manufacturer with the scooter. Do not try to open or modify your scooter, as doing so will void your manufacture warranty, and may cause failure to your device leading to serious bodily injury or death.
5. Do not operate the scooter while under the influence of drugs and/or alcohol.
6. Do not operate the scooter when you are restless or sleepy.
7. Use your best judgment to keep yourself out of dangerous situations with your scooter.
8. The scooters have a range of about 28miles and a maximum speed of 15mph.
9. Do not turn sharply, especially at high speeds
10. Do not ride in dangerous weather: snow, rain, hail, sleek, on icy roads or in extreme heat.

Accessories

1. User Manual/ Service Card
2. Power Adapter
3. T-shape Screw
4. Allen Key

Product Features

• Gear mode: is for walking mode, and its maximum speed is about 3 mph; the ambient light will blink when this mode is enabled. M is for standard mode, and its maximum speed is about 9 mph. H is for sport mode, and its maximum speed is about 15 mph.
• Speedometer: Remaining mileage will be displayed within the first 3 seconds after powering on; the
  current speed is displayed afterwards.
• Function mode: Bluetooth, Lock, Cruise mode, Error prompt Light.
• Battery indicator: Displays the remaining battery power; flashes red when the power is 10%.
• Switch button: Press to turn on, press and hold for 3 seconds to shut down. When powered-on, press once to turn the light on/off, and press twice to switch the gear mode, Press the button three times in a row to switch between metric and imperial units.

Assembly

1. Pull the folding handle upwards until an audible click is heard. then pull the folding handle confirming the lock is in place.
2. Manually connect the handlebar and data cable in the front tube Once connected, check if the scooter powers on normally.
3. Use the included 6 screws to fasten the handlebars. Further tighten the screws by using the T-shape allen key

Charge Your Scooter

1. The indicator light of the charger turns green when the scooter is connected to the power supply.
2. When actively charging, the light should switch to red from green.
3.  After charging, the indicator light should switch back to green.

1. Open the rubber flap
2. Plug the power adapter into the charging port
3. Fasten the rubber flap after charging

Attention:

• Only use the original power adapter when charging.
• Keep away from children and animals when charging, and keep away from flammable materials.
• Do not charge or use the battery if it emits a peculiar smell, overheats or leaks.

How To Ride

1. Press the Switch button to turn the scooter on and check the battery level. If the battery level is too low, please charge it before riding.
2. Stand with one foot on the baseboard and kick off against the ground with your other foot. The motor is active once the speed of the scooter exceeds 3 mph.
3. While riding, place the other foot on the pedal and lightly press the accelerator to engage the motor.
4. When steering or decelerating, release the accelerator and use the brake lever to brake.

Folding

Turn off the scooter, press the red safety lock, and release the folding handle; fold the front tube clamp, align the folding hook and put it into the hook fixing buckle; lift the front tube and confirm whether it is fastened firmly

Unfolding

Remove the folding hook from the hook fixing buckle, straighten the front tube, close the folding handle until there is a “click” sound; flip the folding handle and confirm whether it is locked.

Phantomgogo APP

Scan QR code with your mobile phone to download and install the APP

• If the APP has been installed on your mobile phone, make sure that the APP is the latest

• STEP 1: Press the button to turn on the scooter and then turn on the Bluetooth function of your mobile phone.
• STEP 2: Open the Phantomgogo APP. Please register/log in to your account according to the app instructions.
• STEP 3: On the APP homepage, select “Search the binding”.

Zero Start / Non-zero Start Mode

1. Zero Start Mode: After start-up, flick the accelerator dial to activate the accelerator.
2. Non- zero Start Mode: After start-up, the accelerator can be started only when the initial speed is ≥3 mph with the help of feet.
3. The factory default of scooter is non-zero start mode.

Scooter Maintenance Schedule (Recommended):
Maintaining the scooter regularly can help keep the scooter neat and in good condition, avoid safety hazards, minimize breakdowns, slow down the deterioration of the scooter, and extend the scooter’s service life.

Cleaning And Storage

If there are stains on the surface of the scooter, use a soft cloth and dip in a small amount of water to wipe; If there are stains that are difficult to clean, smear them with toothpaste and brush them repeatedly, then clean them with a damp cloth. If the plastic parts of the body are scratched, use sandpaper or other abrasive materials to polish them.

Tips:

Ensure that the scooter is off and the charging port rubber cover is tightly fastened during cleaning, otherwise electric shock or serious failure may occur due to internal water flow. When not in use, store in a dry and cool place indoors. Avoid outdoor storage for a long time. Long-term sun exposure, overheating and cold outdoor environment will accelerate the appearance and tire aging of the scooter, and reduce the service life of the scooter and battery pack.

Maintenance & Cleaning

Tire lnflation and Maintenance

The product uses puncture-proof tubeless tires, please check the tire pressure carefully before riding, and ensure the tire pressure is 45- 50 psi. When the tire height sinks 20%-30%, it is time to inflate. The recommended tire pressure is 45-50 psi after inflation, and the tire should be inflated at least once every 2-3 months. Regular inflation and
cleaning of tire surface debris can prolong the service life of the tire.

Battery Maintenance

1. Do not use battery packs of other models or brands, or else there may be safety risks.
2. It is strictly forbidden to disassemble, squeeze, or puncture this product; it is forbidden to throw this product into water, fire (including heat sources such as stove, heater, etc.) or expose it to an environment with a temperature higher than 122°F.
3. Water entering the battery may cause damage to the internal circuit, and there is a risk of fire or even explosion; if the battery is suspected of water entering, please stop using it immediately and contact the aftersales service.
4. Do not touch the battery contacts, disassemble or puncture the case. Avoid metal objects contacting the battery contacts, or else it may cause short circuits, damage to the battery or personal injury or death.
5. Avoid recharging after the battery is completely depleted, and try to charge as soon as possible to prolong the service life of the battery.
6. Only use the original power adapter when charging, or else there is a danger of damage or fire.
7. Please fully charge the battery before storing it after each use, which will help to extend the battery life.
8. Do not place the scooter in an environment above 122°F or below -4’F (for example: in a car exposed to the sun in summer). It is forbidden to throw the scooter into a fire, or else it may cause the battery to fail, overheat, and even cause fire.
9. When used at normal temperature, the battery pack can exert a higher range and performance; if used in an environment below 32’F, the battery life and performance will decrease.
10. If it won’t be used for a long time, please fully charge it first, store in a cool and dry place, and fully charge it every 30 days.

Specifications

FAQS