iHealth PO3M Air Wireless Pulse Oximeter User Manual
TESTING INSTRUCTIONS
- Open the clamp of the Pulse Oximeter, then place your middle, ring or index finger of your left hand into the rubber opening of the oximeter with nail side down, as pictured.
- On the front panel, press the “Start” button
once to turn the oximeter on. - Remove the oximeter from the finger. The oximeter will automatically turn of after 8 seconds.
- On the front panel, press the “Start” button once to turn the oximeter on.
- If the signal strength is too low, switch to another finger and perform the test again.
CHARGE THE BATTERY
Plug the iHealth Wireless Pulse Oximeter into a USB port for three hours or until the battery indicator turns of.
DOWNLOAD APP
Plug the iHealth Wireless Pulse Oximeter into a USB port for three hours or until the battery indicator turns of. Download the free “iHealth My Vitals” app from the App store (compatible iOS device ) or Google play store (compatible Android device ). Follow the on-screen instruction to register and set up your iHealth user account. (Your compatible iOS device should be version 5.0 or later And Android device should be version 4.3 or later )
BEFORE FIRST USE
ACCESS IHEALTH CLOUD
Upon setting up your app user account, you will also have access to a free, secure iHealth Cloud account by using your app login name and password. Go to www.ihealthlabs.com, then click on “ Sign In”.
TURN BLUETOOTH“ON”
Your iHealth Wireless Pulse Oximeter uses Bluetooth 4.0 Low Energy(BLE) technology. Enable the Bluetooth on your device (If iOS device :Settings->General->Bluetooth->On If Android device:Settings->Bluetooth->On),launch the app to initiate the connection. The Bluetooth icon will light up and stop flashing when a successful connection is established. The date and time of the Pulse Oximeter will be synced with your iOS device upon first successful connection.
