Polaris EP37 Robotic Pool Cleaners User Manual
WARNING
For anything other than the routine cleaning and maintenance described in this guide, this product must be serviced by a qualified professional with sufficient experience in pool equipment installation and maintenance so that all of the instructions in the product’s complete installation and operations manual can be followed exactly. All safety instructions in the complete manual must be followed explicitly in order to prevent injury hazards. Improper installation and/or operation will void the warranty. Never turn the cleaner on unless it is fully submerged in the water. Doing so will void the warranty and may cause severe damage to the cleaner motors.
Contents
Full caddy assembly instructions are found separately.
Submerge in pool
Wait for the bubbles to stop completely, then let the cleaner sink to the bottom of the pool.
Spread all of the length of cable out over the pool to avoid tangling.
Do not use an extension cord. Never turn the cleaner on unless it is fully submerged in the water. Doing so will void the warranty and may cause severe damage to the cleaner motors.
Start cleaning
When the cleaning cycle ends, always remove the cleaner from the pool.
Never lift the cleaner out of the pool by the floating cable.
Unplug
Untangle
Clean the filter
REFERENCE LINK
https://www.polarispool.com/en/products/pool-cleaners/robotic-pool-cleaners
