Table of contents
show
HamiltonBuhl Portable Bluetooth CD Player with Cassette Recorder User Guide
Warnings and Precautions
Caution:
- TO PREVENT ELECTRIC SHOCK, FULLY INSERT THE PLUG INTO THE OUTLET, ENSURING THE WIDE PRONG IS IN THE CORRECT SLOT.
- Use of any controls or adjustments or performance of procedures other than those herein specified may result in hazardous radiation exposure.
- There is a danger of explosion if batteries are placed incorrectly.
Warning:
- To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface.
- Use of this unit near fluorescent lighting may cause interference.
- There is a danger of explosion if you attempt to charge standard alkaline batteries in the unit. Only use rechargeable NiMH batteries.
Important Safety Instructions
- Please read, follow and keep these instructions and comply with all recommended cautions.
- Do not use this unit near water.
- Clean with a dry cloth only.
- Do not block ventilation openings.
- Do not place the unit near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Follow safety precautions and use a polarized or grounded-type plug. A polarized plug has two blades with one prong wider than the other.
- Protect the power cord from being walked on or pinched, particularly at plugs, or where they exit the unit.
- Only use attachments and accessories specified by the manufacturer.
- Unplug the unit during lightning storms or when unused for long periods of time.
- Refer all service needs to qualified service personnel.
Technical Specifications
- Mode: MPC5050BT – MPC5050
- Bluetooth® 2.1
- Adapter AC Input: AC100-240V~50/60Hz
- Adapter DC Output: DC 6V 1.2A
- Batteries Power: DC 12V (8×1.5V) “C” size UM-2/LR14 Batteries
- Output Power: 2 x 2 Watts
- Speaker: 76mm (3”) Cone Type
- AUX-In: 3.5mm Jack
- Headphone: 3.5mm x 6
- Dimensions: 13.39” L x 10.24” D x 5.31” H
- Weight: 5.07 lbs.
- Operation Temperature: +41°F – +95°F
- General Frequency: FM 88 – 108 MHz
- CD Optical Pick-Up Lens: 3 Beam Semiconductor Laser
In the Box
- Audio Ace™
- Power Supply
- Instruction Manual
Feature Controls
- AUX-In Jack (Line in)
- Power Button
- Tune+ or /Tune- Button
- Play/Pause/Pair Button
- Stop/M+ (Memory Up) Button
- X-BASS Button
- FM Antenna Rod
- Carrying Handle
- Repeat Button
- MEM/PROG Button
- Source Button
- Volume Buttons
- CD Open Button
- Cassette Pause Button
- Cassette Stop/Eject Button
- Cassette F.FWD/REW Button
- Cassette Play Button
- Cassette Rec Button
- Speakers
- LCD Display
- 6x Headphone Jacks
- DC in (DC-6v)
- Battery Compart
Listening to a Cassette
To insert your cassette tape:
Press the Stop/Eject button to open the cassette door. Insert your cassette tape into the compartment with the exposed section of the tape facing upward. The side that you wish to listen to record onto should be facing towards you. Push the cassette door unit it locks in place.
To remove your cassette tape:
Press the Stop/Eject button to open the door then lift the cassette out.
Playing Cassettes:
- Press the Source button to select Tape mode.
- When the Tape mode is selected, “TAP” will appear on the LCD display.
- Insert the cassette tape and press the PLAY button. The unit will automatically stop playing when it has reached the end of the cassette. If you wish to continue playing the cassette; please press Stop/Eject, remove the cassette, flip the cassette over to the other side, reinsert the cassette and press Play.
- Press the Stop/Eject button to stop the tape. Press the Stop/Eject button again to open the cassette door.
- Press F.FWD or REW button to fast forward or rewind through the tape.
Recording to Your Cassette Tape:
- Insert a cassette.
- Select the source you want to record (CD/FM/BT/AUX-In/TAP) and start playing the selected source.
- If you select TAPE mode, you can speak into the unit to record your voice. For best results, make sure you are facing the cassette door.
- Press the Record button to start recording.
- To stop recording, press the Stop/Eject button once.
- To playback the recording, press the REW button to rewind, then press the Play button to start playing.
DOWNLOAD PDF
HamiltonBuhl Portable Bluetooth CD Player with Cassette Recorder User Guide
