Table of contents
show
PowerLocus P2 Bluetooth Headphones for Kids User Manual
Product indication
- Power on /off
- MEN play/pause, answer/end calls, reject call, last number redial
- Volume up(Short Press)/Next song(Long Press)
- — Volume down(Short Press)/Last song(Long Press)
- Multi-function button(pairing. auto search radio)
- Headset jack
- LED indicator & Micro USB charging port
- Microphone
- Micro SD/TF card slot
Power on/off the headset
- Power on: Slide the switch right and the blue and red indicator light will flash(the headset said the wireless is ready to pair).
- Power off: Slide the switch left and blue indicator light will go off.
Pair to your mobile phone or other products
- Slide the switch right and the blue and red indicator light will flash(the headset said the wireless is ready to pair).
- Tum on the Bluetooth function of your phone or other products.
- Search for the Bluetooth devices and select “PowerLocus P2” (Enter the code 0000′ if needed)
- If paring is successful, the blue light indicator starts flashing (the headset said: the wireless is connected successfully).
- Please make sure the headphone is working before pairing.
- It will connect to the pre-set phone automatically when turns on(Please make sur the Bluetooth function of your phone is working)
- If the pairing is not successful, please switch off headset firstly, and then re-pair again.
MP3/EM
- In power-on mode, insert the TF card, short press M button, MP3 will play automatically If have not TF card, short press MI button, FM radio will play automatically.
- In power-on mode, short press M button, FM radio will play automatically.
- Long press the Play/Pause button I to auto search all radio station, (3) wait for 40sec to I min for the stations to be memorized, (4) then long press a or, — you will listen to any radio station you like…
- If you are listening to FM radio, short press M button, it will be converted to the bluetooth mode. And auto connected to your phone or other products.
Siri/Google assistant, answer/end calls, reject call last number redial(In the Bluetooth mode)
- When there is a call, short press HI/f* button can answer the call. After the call, press MY button can hang up. If the other side hang up, no need to press the M//” button.
- Reject call: long press MI button about 2-3seconds
- Last number redial: press fast M/” button 2 times
- When the phone call out or answer the call, if the Bluetooth headphone are playing the music, the music will pause automatically and enter the waiting state. After hang up, the music will continue to play automatically.
- Activate the Siri/Google Assistant long press M/ button about 3-5 seconds
Charging the headset
- Insert USB charging cable into USB port which have support 5V power (such as AC/DC USB adapter or PC USB port). When the red light is on, the headset is in charging. When the red light will be off, the headset is fully charged. It takes about 2-2.5 hours to charge the headset fully.
- The battery is rechargeable. Low-Voltage alert: When the alert tone “low battery” sounds and the indicator turns into red indicate that the battery has run out, need to be charged as soon as possible. First time charging: please be sure the battery has been charged fully before use.
Wired headphone function
For any mode of headphone, you can connect one side of 3.5 stereo sound supply extension line to headphone audio jack, the another side connect to Audio jack(such as mobile phone, computer, Ipad etc). Then you will hear songs from other devices.
Precautions
- Please be gentle when using headphone. The Maximum tolerance of the button is 250g. Excessive force or be stroked by something all will damage buttons.
- Please do align the USB port when plug or pull USB cable in case that damages the USB cable fail to charge the headphone.
- When encounter something similar to interference please first delete the Bluetooth devices that connected with headphone before,then restart your phone, at last please repair with the Bluetooth headphone.
- If long time without using headset, it is recommended to turn off the headset, in case that the battery is in a low voltage state, causing the charging problems.
- Please don’t put the headset in hot temperature area.
- Please don’t vibrate or shock the headset violently, and do not let it fall down from high place.
- If there is no response of the headset, Please insert headphone plug hole to reset by tool.
REFRENCE LINK
