Dash Precision Thermometer Quick Start Guide

Table of contents show

The Quick-Read Thermometer turns on and off automatically when opening or closing the Probe. The LCD display will illuminate and turn off automatically.
The Thermometer shuts off automatically after 3 minutes of non-use to preserve battery life. To power back on, close the Thermometer and reopen to engage the screen.
The reaction speed of the Thermometer to a new temperature is between 3-5 seconds. Please allow this time for the Thermometer to adjust to get the most accurate reading.
For the most accurate read, insert the Probe into the deepest part of the food. The Probe should be inserted at least 1 inch for optimal accuracy.
Temperature Range: -40°C/-40°F to 250°C/482°F.
Accuracy for all temperatures is ±2°C/±4°F.
You can change the LCD Display from °C to °F using a button inside the Battery Cover.

Dash-Precision-Thermometer-Fig1

The Precision Quick-Read Thermometer is water resistant and can be washed under running water. Take care not to expose to extreme water pressure, and do not submerge the Thermometer.
The Thermometer is hand-wash only. Do not put the Thermometer in the dishwasher or expose to high heat liquids such as boiling water or fry oils for an extended period.
The Quick Read Thermometer uses AAA batteries.
When replacing batteries, please use fresh AAA batteries, do not mix batteries of different ages and charges, as this may reduce battery life.
To replace batteries, first remove the back cover with a Phillips screwdriver, then follow the placement direction in the battery chamber. Be sure to replace the battery door and secure tightly to maintain water resistance.
Do not mix alkaline, carbon-zinc and rechargeable batteries.
Do not dispose of batteries in fire.
Batteries should be recycled or disposed of per state and local guidelines.

Dash-Precision-Thermometer-Fig2