AMZANE PRO K8 Wireless Earbuds User Manual

AMZANE PRO K8 Wireless Earbuds User Manual

Welcome
Thank you for purchasing our AMZANE true wireless Earbuds Please read over our user manual carefully and retain it for future reference.

Specification:

1. Bluetooth Version: 815.3-EDR
2. Support: HSP/HFP/A2DP/AVRCP
3. Transmission Range: 33 feet (If there are no obstructions)
4. Distortion: <1%
5. Earbuds Playback Time: Approximately 7-10 hours (High-quality music and high volume may accelerate battery consumption!; (50% volume:10 hours playtime 60% volume.9 hours playtime: BO% volume 8 hours playtime. 100% volume: 7 hours playtime
6. Earbud Charging Time: Approximately 1.5 hours;
7. Approximately 1.5 hours Earbuds Battery Voltage/Capacity: [LI-Pol battery inside) 3.7V/4DmAh
8. Charging Case Battery Voltage /Capacity: 3.7V/500mAh Hemove the protective film from the charging case before using the earbuds for the first time, Charge the earbuds fully alarm fire trial.

How to Charge Correctly
With U5B-C cable: Connect the USB C cable to a power source in order to charge both.

Charging Case:
Charging in Progress: The digital display number increases from 1-10D Fully Charged: The digital display number reads 100 all the time.

Earbuds:

The earbud indicator light is red and the charging case’s digital display bars increase from the first to the fourth Fully Charged: The red indicator light on the earbuds will disappear and the charging case’s digital display columns will disappear Without USB C cable: A charged case with charge the earbuds even without connection to a power source.

Charging Case:
Charging in Progress: Digital display number from 10D to discrease Charging Complete; Digital display number disappears

Earbuds:
Charging in Progress: The earbud Indicator light is red and the charging case’s digital display bars increase from the first to the fourth Fully Charged: The red indicator light on the earbuds will disappear and the charging case’s digital display columns will disappear.

• If you use earbuds with large ear tips and the battery runs out, please note that the size of the large ear tip can prevent the earbuds from fitting well into the charging case. Press down on the earbuds when returning them to the charging case. This pressure will allow the earbuds to connect completely with the charging case pin
• The indicator lights will turn red to show that the earbuds are charging normally. Alternatively, you can take off the large ear tips to charge.

If you don’t see a red indicator light on the earbuds, use alcohol to wipe both charging ports, as well as the charging case’s charging pins. Ensure the pins between the carbuds and the charging case are connected securely.) The earbuds have a playtime of 7 – 10 hours on a single charge. The charging case can Fochare the carbuds 2.5 times. co vau can get 35 hours of total playtime from a fully charged charging case.

Power on:

• Remove the two earbuds from the charging case, they will turn on and connect with each other automatically
• When the earbuds are powered off, touch both earbud buttons for 3 seconds. The indicator lights on both earbuds will turn blue for 1 second

Power off:

• Put the two earbuds back into the charging case (The earbuds ‘indicator lights will turn red)
• When the 2 earbuds are powered on, touch both earbud buttons for 5 seconds (The indicator lights on both parhurts will turn red for 1 second.

FAQS

Q: How do I Adjust Volume 7 the volume is a little low.
A: After you pair the 2 earbuds with your phone First, If your phone is 10S SYSTEM, Please Touch Once R Earbud. Second, If your phone is Android SYSTEM, Please first touch Onte R Earbud, then Add up the Volume by Your phone Because iPhone and Android have different system protocols, the operation is different.

• If some functions of the Bluetooth earbuds are not available with your phone app, check to see if the phone’s operating system is compatible with the app. Also, you can:
  • update your app version -download a different app and update your phone’s operating system
• Due to signal disruptions present in different environments, the barbuds might not work properly. For example, you might hear abnormalities from the earbuds (such as arbitrary noises}. Please put the earbuds into the charging case for 10 seconds, then remove and reconnect them with your device again the problem will be solved.
• When you have an incoming call, please Double Touch the earbud button to receive the call, If you use your phone to receive the call, the audio will go through the phone, not the earbuds.

Pairing case,

1. Remove earbuds from the charging
2. Wait for 5 seconds. Once one earbud’s indicator light flashes red and blue, and the other earbud’s indicator light flashes blue, then the earbuds are paired successfully.
3. Open the bluetooth of your devices, search, and click the model “AMZANE PRO” ” The Earbuds will pair successfully with your device.
   • Because the earbuds have a primary/ secondary designation, the batteries are different. The battery of the primary earbud dies faster than that of the secondary earbud, This is normal.

Notes

1. If you have purchased 2 or more sets of earbuds from our company. Please pair each set separately. When you want to use them, pair the two earbuds from one set with your phone first, then pair the earbuds from the other set.
2. Please do not pair one earbud from one set with an earbud from a different set, Thi will affect normal use. [For example,
   1. If you want to use one earbud, and your spouse wants to use the other one, please ensure that these two earbuds come from the same set.
   2. If you want to use one set of earbuds for yourself for one device, after you have paired the matching earbuds together, your spouse can open the second pair.

Notice:
When you are listening to music and you receive a call suddenly after you finish the call, you might have trouble restarting the music, lust replaces the earbuds with the charging case. Once the earbuds’ indicator lights are red, then remove the earbuds from the case. The problem will be solved.

Safety Precautions:

The earbuds and charging case are of excellent quality. To extend the life of this product, follow these instructions:

1. Keep this product away from extreme heat, or corrosive environments.
2. Prevent this product from being struck or dropped, warping, etc.
3. Don’t dismantle the Earbuds or Charging Case.
4. Don’t overcharge this product for a long time, as this will decrease the battery service life.
5. Stop using this product immediately if it causes discomfort or pain.
6. Use DC-5V 1A chargers/adapters certified by a regulated manufacturer. Recharging and discharging the headphones repeatedly will lead to a decrease in battery performance over time, which is normal for all rechargeable batteries (Don’t press the elastic pin contact point, which can cause the product to function incorrectly.]

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (11 This device may not cause harmful interference. and 12l this device must accept any interference received. including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications.

However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and or the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.