ZAGG-Pro-Keys-Bluetooth-Keyboard-User-Manual-Feature-Image

ZAGG Pro Keys Bluetooth Keyboard User Manual

ZAGG-logo

ZAGG Pro Keys Bluetooth Keyboard User Manual

ZAGG-Pro-Keys-Bluetooth-Keyboard-User-Manual-Image

Important Safety Instructions

  1. Take frequent breaks when using your keyboard. If you experience any discomfort, pain, tingling, numbness, or burning in your neck, shoulders, arms, wrists, hands, or any other part of the body, stop using your keyboard and consult a physician.
  2. Use only Type-C USB chargers in connection with your keyboard.
  3.  Do not attempt to service your keyboard.
  4. Do not disassemble or attempt to disassemble your keyboard.
  5. Do not crush or puncture your keyboard.
  6.  Do not immerse your keyboard in water.
  7.  Do not put your keyboard in contact with water or other liquids as they could cause a short circuit, fire, or electric shock that could result in injury, death, or property damage.
  8.  Do not use liquid or aerosol cleaners or solvents on or near your keyboard. Clean only with a soft, dry cloth. Disconnect any cords before cleaning the keyboard.
  9.  Do not use your keyboard while operating a motorized vehicle, including automobile, boat, or airplane. Doing so could put you and others at risk of serious injury, death, or property damage.

INSERTING YOUR DEVICE

ZAGG-Pro-Keys-Bluetooth-Keyboard-User-Manual-Image-1

  1. Holding your device in landscape mode with the volume control buttons facing up, press the top half of your device into the case and apply light pressure to snap it snuggly into place.
  2. Press the bottom half of your device into the case and check each corner to make sure your device is seated properly.
  3. Once your device has been inserted into the case, attach the case to the keyboard by setting the case in one of the two cradles on the keyboard (above the keys).
  4. Place the top of the magnetized, foldable back flap against the top of the back of the case. You ’ll feel it magnetically snap into place. This should create a triangular stand at the base of the flap that props up your tablet in the case.
  5. To detach the case from the keyboard, simply pull the magnetized back flap away from the case.
  6. To remove your device from the case, hold on to the top lip of the case and press against the back of the case. Then, grasp the exposed side of your device and lift/pull it away from the cover.

ZAGG-Pro-Keys-Bluetooth-Keyboard-User-Manual-Image-2

REMOVING YOUR DEVICE

  1. To detach the case from the keyboard, simply pull the magnetized back flap away from the case.
  2. To remove your device from the case, hold on to the top lip of the case and press against the back of the case. Then, grasp the exposed side of your device and lift/pull it away from the cover

ZAGG-Pro-Keys-Bluetooth-Keyboard-User-Manual-Image-3

POWERING ON AND OFF

  1. To turn your Pro Keys on, press the Power button located at the top right corner of the keyboard. A green LED will light briefly.
  2.  To turn your Pro Keys off, press and hold the Power button for three seconds. A red LED will flash indicating it has turned off.

ZAGG-Pro-Keys-Bluetooth-Keyboard-User-Manual-Image-4

PAIRING YOUR PRO KEYS

Your Pro Keys keyboard can pair with up to two devices at once. Pairing your Pro Keys is easy. Just follow these instructions.

  1. Ensure your device’s Bluetooth® is on.
  2.  Press and hold Pro Key ’s Bluetooth 1 or 2 keys for three seconds. A blue LED on the Power button will begin pulsing, indicating your Pro Keys is in pairing mode.
  3.  Your device will display “ZAGG Pro Keys” as an available pairing option. Select it and complete any other pairing steps based on your device.
  4. To pair your Pro Keys to another device, repeat steps 2 and 3. To toggle between devices, simple press 1 or 2.
  5. Once paired, the Blue LED on the power button will stop pulsing and fade to off. Once begun, if the Pro Keys doesn’t complete pairing after 60 seconds, it will abort the process. If this happens, repeat steps 2 and 3.

ZAGG-Pro-Keys-Bluetooth-Keyboard-User-Manual-Image-5

CHARGING YOUR KEYBOARD

Your Pro Keys features a case that protects your device even when it’s not connected to your keyboard. When you’d like to use the case without the keyboard, there are three ways you can switch to your onscreen keyboard.

  1. Plug the Type-C connector into the charging port on the keyboard.
  2. Plug the regular USB connector into any 5V USB outlet. A red LED will light to indicate your keyboard is charging. This LED will turn off when your keyboard is fully charged.

ZAGG-Pro-Keys-Bluetooth-Keyboard-User-Manual-Image-6Normal use is approximately one hour of use per day without the backlit feature. Using the backlit feature will impact battery life and require more frequent charging

BATTERY LIFE

To check your Pro Keys’ battery life, press Fn + the battery key. The LED light will flash one of the following three ways:

  • 3 green flashes = 50% or more battery life
  •  3 yellow flashes = 25-49% battery life
  •  3 red flashes = less than 25% battery life

ZAGG-Pro-Keys-Bluetooth-Keyboard-User-Manual-Image-7

SPECIAL FUNCTION KEYS

Your Pro Keys keyboard has been designed with the following special function keys to give you more control of your device.

ZAGG-Pro-Keys-Bluetooth-Keyboard-User-Manual-Image-8

  1. 1 & 2 PAIRING: Activates your device’s pairing mode.
  2. HOME: Displays your device’s home screen.
  3. LOCK: Activates and deactivates your device’s sleep mode.
  4. APPS RUNNING: Displays all of the apps currently running on your device.
    LANGUAGE SYMBOL: Toggles between keyboard languages (if active on your device); also, pressing cmd
    + space bar will do the same.
  5. KEYBOARD HIDE/SHOW: Hides or shows your onscreen keyboard.
  6. PREVIOUS TRACK: Skips to the previous track on your selected playlist.
  7. PLAY/PAUSE: Starts or pauses your currently playlist.
  8. NEXT TRACK: Skips to the next track on your current playlist.
  9. MUTE: Mutes your device’s audio
  10. VOLUME DOWN: Decreases your device’s volume.
  11. VOLUME UP: Increases your device’s volume.
  12. POWER: Turns your Pro Keys keyboard on and off.
  13. BATTERY LEVEL: Indicates remaining battery life.
  14. BACKLIGHT ON/OFF: Activates the backlight feature.
  15. BACKLIGHT COLOR: Changes backlight colors. (7 possible)

TROUBLE SHOOTING

If your device doesn’t respond to Pro Keys, there may be a simple explanation such as a dead battery or unsuccessful pairing. Please use the following to help troubleshoot your situation. If none of the following solve your issue, please contact ZAGG Customer Service and one of our trained professionals will be happy to assist you.

  1. Restart your device.
  2. Turn your Pro Keys off and back on.
  3.  Forget and re-pair your Pro Keys.
  4.  If your Pro Keys does not establish or maintain a Bluetooth connection,reset the Bluetooth module by charging your keyboard.
  5. If,after charging,your keyboard doesn’t operate correctly, please contact ZAGG Customer Service.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  •  Reorient or relocated the receiving antenna.
  • Increase the separation between the equipment and receiver.
  •  Consult the dealer or an experienced radio/TV technician for help.

REFERENCE LINK

https://uk.zagg.com/

Leave a Reply