HP Pro MFP M182-M185 Color LaserJet Manual
SETUP GUIED
Trouble getting started? Find setup information and videos online.
LED control panel view
- Control panel LED display
- Up arrow button
- Down arrow button
- Start Color Copy / OK button
- Start Mono Copy button
- Copy Setup button
- Cancel button
- Attention LED
- Ready LED
- Supplies LEDs
2-line LCD control panel view
- 2-line control panel display
- Left arrow button
- OK button
- Right arrow button
- Cancel button
- Start Mono Copy button
- Start Color Copy button
- Number of Copies button
- Lighter/Darker button
- Copy Menu button
- Alphanumeric keypad
- Fax Redial button (fax models only)
- Start Fax button (fax models only)
- Setup button
- Wireless button (wireless model only)
- Back arrow button
- Ready LED
- Attention LED
Control panel light patterns
Control panel error message
| Error Message | Solution |
| Load Paper | Insert paper. |
| • Initializing… • Cleaning… • Printing… Cool down mode | No action to take. |
| Door is open | Secure all doors. |
| • Jam in tray 1. Clear jam and then press OK. • Jam in cartridge area. Open top cover and remove cartridge. Clear jam. | Refer to User Guide. |
| • Manual Feed. Plain, Letter. Or press OK to use available media. • Manual Duplex. Load tray 1. Press OK to continue. | Press the OK button when ready. |
| • Supply problem. • Install cartridge. • Incompatible cartridge. • Protected cartridge. • Unauthorized cartridge. | Take out and reinsert the toner cartridge. If error still appears, go to www.hp.com/support/ljM182MFP. |
| • Cartridge is very low. • Used or counterfeit cartridge in use. | Replace with a new cartridge. |
Download and install the software
NOTE: Do not connect the USB cable until you are prompted to do so.
Method 2: Download from printer support website (Windows)
- Go to www.hp.com/support/ljM182MFP.
- Select Software and Drivers.
- Download the software for your printer model and operating system.
- Launch the software file from the folder where the file was saved.
- Follow the onscreen instructions to install the software.
- When prompted to select a connection type, select the appropriate option for the type of connection.
Method 1: Download from 123.hp.com/laserjet
- Go to 123.hp.com/laserjet (Windows) or 123.hp.com (OS X), and click Download.
- Follow the onscreen instructions and then prompts to save the file to the computer.
- Launch the software file from the folder where the file was saved.
- Follow the onscreen instructions to install the software.
- When prompted to select a connection type, select the appropriate option for the type of connection.
Mobile printing
Method 1: HP Smart
Use the HP Smart app to set up, print, and more.
- Scan the QR code or go to 123.hp.com.
- Install the HP Smart app.
- Run the HP Smart app and follow the onscreen instructions to connect, set up, print, and more.
Learn more about mobile printing
For further information about these and other operating systems (Chrome/Google Cloud Print), go to www.hp.com/go/LaserJetMobilePrinting or scan the QR code.
Troubleshooting
Wireless connection troubleshooting
Verify that the printer is within the range of the wireless network. For most networks, the printer must be within 30 m (100 ft) of the wireless access point (wireless router). A USB cable might be required for temporary connection between the printer and the computer. To ensure that the wireless setup information synchronizes correctly, do not connect the USB cable until prompted to do so.
Follow these steps to restore the network settings:
- Remove the USB cable from the printer.
- Press and hold the Wireless button on the printer control panel. When the Ready LED and the Attention LED start blinking simultaneously, release the Wireless button. Printer will restore network default automatically and restart.
- When the Ready LED is on, continue to install the software.
REFRENCESS LINK
http://h10032.www1.hp.com/ctg/Manual/c06431838.pdf
