PYLE PYD1964B 6-Channel Bluetooth DJ manual

PYLE PYD1964B 6-Channel Bluetooth DJ manual

Safety Precaution

Read all documentations carefully before operating the equipment. Retain this manual for future reference. Follow all instructions printed on unit for proper operation.

• Do not opern cover (or back cover) to reduce the risk of electric shock or fire. There are no User serviceable parts inside. Refere servcing to qualified service personnel.
• This symbol is used to alert the operator to the presence of important operating instructions And precautions detailed in the documentation manual.
• This symbol is used to warn operators that uninsulated dangerous voltages are present Within the products enclosure that may pose a risk of electric shock.

WARRINIG

• Warning: To avoid fire or risk of electric shock, do not expose this unit to rain or moisture.
• Notes:
  • Make sure power outlets conform to the power requirements listed on the back of the unit.
  • Main Voltage must be correct and the same as that printed on the rear of the unit.
  • Do not use the unit if the electrical cord is frayed or broken.
  • The unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on unit.
  • The unit shall be connected to a mains socket outlet with a protective earth ground connection.
  • Do not use equipment if Power plug is damaged, smashed, bent or pinched.
• Warning:
  • Using, adjusting or changing program control beyond this specification may cause dangerous radiation.
  • The unit should be serviced by qualified service personnel.
  • When repairing, use only same specification parts.
• Notes:
  • Select the voltage requirement by adjusting the voltage selector switch at the rear panel.
  • Make sure that the power of the equipment is off and disconnected from the main voltage before switching the voltage selector to the required setting. We will not be responsible for damages arising from the improper installation, wiring or operation due to the fault or negligence of the user.

IMPORTANT: For Your Attention

1. Read manual — Please read through safety and operating instruction carefully before using this unit.
2. Keep manual — Please keep this manual for future reference.
3. Please heed important warnings — Please operate unit according warning and note of manual.
4. Operate according what the manual indicates — Operate according to instruction of manual.
5. Water and moisture — Position of the unit away from water or any kind of moisture.
6. Carriage and rack — The unit should be fitted to match carriage and rack that the manufacturer recommends. Please be careful with carriage while moving the unit.
7. Heat — Device should not be near heat sources such as radiator, stove and amplifier etc.
8. Power supply — The unit only operates with proper rated power supply. Please ask dealer or local power supply company if you are unsure what type of power supply. If operating with batteries or other power supply, please refer to this booklet.
9. Connection ground or polarization — Perhaps this unit has a polarization AC plug. This plug only has one direction of insertion. Please insert properly for safety.
10. DO not smash, pinch or try to repair power cord.
11. Clean — Clean this unit with a soft cloth. Prevent water from entering unit through openings.
12. For device with AC power cord, check AC plug sheet and all of exposed metal parts with ohmmeter before using, and resistance ought to be more than 100K ohm.
13. Long period of non-use— Unplug the power cord if the unit is not used for a long time
14. Prevent solids and liquids from entering into unit – BE CAREFULL, DO NOT INSERT SOLID OR SPATTER LIQUID TRHOUGH OPENINGS OF UNIT.
15. IF BROKEN OR NEEDS REPAIR — In case of following problems, refer to qualified service personnel:
    A) Power cord or plug mangled or damaged
    B) Solid or liquid has entered the casing of the unit
    C) The unit was exposed to rain or extreme weather
    D) Device does not function properly
    E) The unit has fallen or is broken, or if casing is damaged
16. Repair — Operate according to instructions, do not try to open or repair unit. All of above symptoms should referred to qualified service personnel

Control & Layout Configuration

1. MIC INPUT
2. MIC HIGH
   This knob adjusts the high tone of the microphone
3. MIC MIDDLE
   This knob adjusts the middle tone of the microphone
4. MIC BASS
   This knob adjusts the bass tone of the microphone
5. MIC 1 LEVEL CONTROL
   Let you control the MIC1 level as they enter the mix.
6. MIC 2 LEVEL CONTROL
   Let you control the MIC2 level as they enter the mix.
7. MIC TALKOVER
8. MIC frequency kill switches
9. MIC CUE
   Use it to monitor the microphone input source
10. BAND EQUALIZER
11. CHANNEL ASSIGN SELECTOR
12. CROSSFADER
13. GAIN CONTROL
    Lets you adjust the gain of the input source.
14. CHANNEL INPUT SELECTOR
    Let you to choose the input source to play for each channel
15. CHANNEL CUE
    Use it to monitor the selected audio input source.
16. CHANNEL LEVEL CONTROL
    Let you control mixer’s overall channel volume level
17. DUAL DISPLAY METER
    Indicate the levels of left and right master channels
18. BALANCE CONTROL
    Master and Zone balance control
19. MONO & STEREO SWITCH
    To choose the mono or stereo output
20. Level Control
21. 6 DIGITAL SOUND EFFECTS
22. EFX VOLUME
23. SPEED CONTROL
24. ECHO ON/OFF
    Turn echo on or off.
25. ECHO DELAY CONTROL
    Let you adjust the delay time for echo
26. ECHO REPEAT CONTROL
27. ECHO LEVEL CONTROL
    Control the depth of the echo effect
28. USB DJ LAMP ADAPTOR
    Allows you to connect 5V/500mA lamp to light the panel.
29. POWER SWITCH
30. EQUALIZER ON/OFF SWITCH
31. LED LIGHT CONTROL
32. HEADPHONE VOLUME CONTROL
    Let you to control the volume level of headphone
33. HEADPHONE JACK
    Accept headphone with 1/4” plug
34. HEADPHONE CUE/PGM CONTROL
35. POWER SUPPLY INPUT JACK
    To connect with the power cord
36. BALANCE OUTPUT CONNECTOR
37. BALANCE OUTPUT CONNECTOR
38. ZONE OUTPUT
39. RECORD OUTPUT
40. MASTER OUTPUT
    Connect the mixer to an amplifier
41. WINDOWS
    To allow the BLUETOOTH signal transmit.
42. LINE INPUT
43. DUAL PURPOSE STEREO INPUTS
44. INPUT SELECT SWITCHES
45. MICROPHONE JACK INPUT
    To connect with a microphone 1/4” Jack
46. GROUND SCREW
    For turntables
47. BLUETOOTH ANTENNA
    For better performance of bluetooth signal receiving
48. BLUETOOTH OUTPUT
    Connect the mixer to another unit using a RCA plugs
49. INPUT SELECT SWITCHES

REFRENCES

DOWNLOAD PDF

PYD1964B_compressed