Table of contents
show
Pyle 6-Channel Bluetooth DJ Mixer
Safety Precaution
Read all documentation carefully before operating the equipment. Retain this manual for future reference. Follow all instructions printed on the unit for proper operation.
Do not open the cover (or back cover) to reduce the risk of electric shock or fire. There are no User serviceable parts inside. Refer serving to qualified service personnel.
This symbol is used to alert the operator to the presence of important operating instructions And precautions detailed in the documentation manual.
This symbol is used to warn operators that uninsulated dangerous voltages are present Within the product’s enclosure that may pose a risk of electric shock.
Warning
To avoid fire or the risk of electric shock, do not expose this unit to rain or moisture.
Notes:
- Make sure power outlets conform to the power requirements listed on the back of the unit.
- The main Voltage must be correct and the same as that printed on the rear of the unit.
- Do not use the unit if the electrical cord is frayed or broken.
- The unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the unit.
- The unit shall be connected to a main socket outlet with a protective earth-ground connection.
- Do not use equipment if the Power plug is damaged, smashed, bent, or pinched.
Warning:
- Using, adjusting, or changing program control beyond this specification may cause dangerous radiation.
- The unit should be serviced by qualified service personnel.
- When repairing, use only the same specification parts.
Notes:
- Select the voltage requirement by adjusting the voltage selector switch at the rear panel.
- Make sure that the power of the equipment is off and disconnected from the main voltage before switching the voltage selector to the required setting. We will not be responsible for damages arising from the improper installation, wiring or operation due to the fault or negligence of the user.
IMPORTANT: For Your Attention
- Read the manual — Please read through safety and operating instructions carefully before using this unit.
- Keep manual — Please keep this manual for future reference.
- Please heed important warnings — Please operate the unit according to the warnings and notes in the manual.
- Operate according to what the manual indicates — Operate according to instructions of the manual.
- Water and moisture — Position the unit away from water or any kind of moisture.
- Carriage and rack — The unit should be fitted to match the carriage and rack that the manufacturer recommends. Please be careful with the carriage while moving the unit.
- Heat — Device should not be near heat sources such as radiator, stove, amplifier, etc.
- Power supply — The unit only operates with a properly rated power supply. Please ask the dealer or local power supply company if you are unsure what type of power supply. If operating with batteries or other power supply, please refer to this booklet.
- Connection ground or polarization — Perhaps this unit has a polarization AC plug. This plug only has one direction of insertion. Please insert properly for safety.
- Do not smash, pinch or try to repair the power cord.
Warnings
- Clean — Clean this unit with a soft cloth. Prevent water from entering unit through openings.
- For device with AC power cord, check AC plug sheet and all of the exposed metal parts with ohmmeter before using, and resistance ought to be more than 100K ohm.
- Long period of non-use— Unplug the power cord if the unit is not used for a long time
- Prevent solids and liquids from entering into unit – BE CAREFULL, DO NOT INSERT SOLID OR SPATTER LIQUID TRHOUGH OPENINGS OF UNIT.
- IF BROKEN OR NEEDS REPAIR — In case of following problems, refer to qualified service personnel:
A) Power cord or plug mangled or damaged
B) Solid or liquid has entered the casing of the unit
C) The unit was exposed to rain or extreme weather
D) Device does not function properly
E) The unit has fallen or is broken, or if the casing is damaged - Repair — Operate according to instructions, do not try to open or repair the unit. All of the above symptoms should be referred to qualified service personnel
- Ventilation — The function of ventilation holes in the unit is for air circulation and cooling. It ensures operation reliability and prevents overheating. Do not block or cover airways. Do not place the unit on bed, blanket, sofa or similar surface. Do not place this unit in an enclosed area, such as an enclosed cabinet or locker.
- Accessories — Do not use parts that the manufacturer does not recommend in order to avoid damage
Control & Layout Configuration
- MIC INPUT
Microphone with balanced connector or 1/4” connector can be connected to the st inputs - MIC HIGH
This knob adjusts the high tone of the microphone - MIC MIDDLE
This knob adjusts the middle tone of the microphone - MIC BASS
This knob adjusts the bass tone of the microphone - MIC 1 LEVEL CONTROL
Let you control the MIC1 level as they enter the mix. - MIC 2 LEVEL CONTROL
Let you control the MIC2 level as they enter the mix. - MIC TALKOVER
There are Talk over, Mic On, and Mic Off functions. The sound pressure level of audio from input sources will be decreased while TALKOVER mode is selected. - MIC frequency kill switches
Allows you to kill the selected frequency range instantly for interesting effects. LED lights to indicate kill is activated. - MIC CUE
Use it to monitor the microphone input source - BAND EQUALIZER
Allows you to tailor the mixer output to suit your taste or performance environment. Each frequency range can be cut or boosted by up to 10 dB. - CHANNEL ASSIGN SELECTOR
Let you select the input source to be mixed by the crossfader control - CROSSFADER
Allow you to smooth the switch between the input sources assigned to channel A & channel B - GAIN CONTROL
Lets you adjust the gain of the input source. - CHANNEL INPUT SELECTOR
Let you to choose the input source to play for each channel - CHANNEL CUE
Use it to monitor the selected audio input source. - CHANNEL LEVEL CONTROL
Let you control the mixer’s overall channel volume level
ECHO ON/OFF
- Turn the echo on or off.
- ECHO DELAY CONTROL
Let you adjust the delay time for the echo - ECHO REPEAT CONTROL
Let you control the time period during which the echo is repeated - ECHO LEVEL CONTROL
Control the depth of the echo effect - USB DJ LAMP ADAPTOR
Allows you to connect 5V/500mA lamp to light the panel. - POWER SWITCH
Press this button to turn on the unit after all input devices are already connected to prevent Damage to your equipment. Turn the mixer on before you turn on the amplifier and turn off the Amplifiers before you turn off the mixer. - EQUALIZER ON/OFF SWITCH
Allow you to select the equalizer working situation - LED LIGHT CONTROL
There are 3 selectors to allow you to off the lights on both the knobs and the decoration line, or only lights on the knobs, or both the decoration line and knobs LED on. - HEADPHONE VOLUME CONTROL
Let you to control the volume level of the headphone - HEADPHONE JACK
Accept headphones with a 1/4” plug - HEADPHONE CUE/PGM CONTROL
Let you to listen simultaneously or separately to the CUE material or the active program. - POWER SUPPLY INPUT JACK
To connect with the power cord - &
- BALANCE OUTPUT CONNECTOR
Connect the mixer to an amplifier with the balanced connector - ZONE OUTPUT
Connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote location. - RECORD OUTPUT
Connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote location. - MASTER OUTPUT
Connect the mixer to an amplifier - WINDOWS
To allow the BLUETOOTH signal to transmit. - LINE INPUT
Let you connect a most high-level audio source, such as CD players, tape decks, tuners, or VCRs.
FAQS
What is a 6 channel mixer for?
This mixer has six AC-coupled channels, each with a logarithmic unity-gain attenuator; suitable for mixing audio signals from modules such as VCOs etc. Additional features include the ability to split the mixer into two separate 3-channel mixers.
How many channels does an audio mixer have?
For instance, an audio mixer of a big cinema or concert may have about 100 channels or more whereas a DJ mixer may just have only 2 channels which would be used to mix two signals from the sound source. There are different types of mixers. A digital mixer can both receive digital and more common analogue signals.
How do mixer channels work?
Channels. A channel is essentially a signal path. A mixer with a large channel count allows more things to be connected and routed through it. Channels are usually designed to accept microphones and/or line-level devices such as amplifiers, preamps, or signal processors.
How many mixer channels do I need?
In summary, the right choice for a mix suitable for a small band should be a good quality mixer: preamplifiers with a good signal/noise ratio. an effective eq (at least 3 band) about 10-12 channels.
What is the use of mixer in audio?
An audio mixer is a device with the primary function to accept, combine, process and monitor audio. Mixers are primarily used in four types of environments: live (at a concert), in a recording studio, for broadcast audio, and for film/television. An audio mixer can come in either analog or digital form.
