PYLE Wireless BT Studio Mixer user manual

Table of contents show

PYLE Wireless BT Studio Mixer

Balanced, Unbalanced- What’s the Difference?

In a word: “noise.” The whole point of balanced lines is noise rejection, and it’s something they’re very good at. Any length of wire will act as an antenna to pick up the random electromagnetic radiation we’re constantly surrounded by: radio and TV signals as well as spurious electromagnetic noise generated by power lines, motors, electric appliances, computer monitors, and a variety of other sources. The longer the wire, the more noise it is likely to pick up.

That’s why balanced lines are the best choice for long cable runs. If your “studio” is basically confined to your desktop and all connections are no more than a meter or two in length, then unbalanced lines are new-unless you’re surrounded by extremely high levels of electromagnetic noise. Another place balanced lines are almost always used is in microphone cables. The reason for this is that the output signal from most microphones is very small, so even a tiny amount of noise will be relatively large, and will be amplified to an alarming degree in the mixer’s high-gain head amplifier.

Schematic diagram of the equipment connection

PYLE Wireless BT Studio Mixer fig 1

Warning!
In the operation of the switch, all level output control (such as channel volume knobs, monitor output knobs, and earphone knobs) should be set up to the minimum position. Because this operation will cause a sudden impact of sound, which can damage the external devices and the hearing of the personnel on-site.

NOTICE
Be sure to leave this switch off if you do not need phantom power. Follow the important precautions below, in order to prevent noise and possible damage to external devices as well as the mixer if you turn this switch on. Be sure to leave this switch off when you connect a device that does not support phantom power to the channel. Make sure to turn this switch off when connecting/disconnecting a cable to/from the channel. Slide the knob on the channel to a minimum before turning this switch on/off.

Front panel function

PYLE Wireless BT Studio Mixer fig 2]

PYLE Wireless BT Studio Mixer fig 3

Mike/Line/Guitar input jacks of MIC channel: The jacks are used to connect microphones or other audio devices in support of cannon plugs and 6.35 plugs.
+48V phantom switch/LED: When this switch is turned on, the +48V LED lights and DC +48 V phantom power is supplied to the XLR plug on the MIC input jack.
Guitar/Line input shifter: The switch is used to shift the connections to different sound sources of the input channels.
Mic input CH 2 band EQ: This is a high-quality, sensitive, 2-segment equalizer that adjusts the overall tone of the channel.
FX send knob: Adjust the size of the signal sent to the digital effect processor.
PAN knob: Positions the channel signal between L/R in the stereo mix;
MIC input volume knob/peak LED: Adjust the volume of the sound input from the microphone or other source connected to the channel.
Digital effect processor adjusts the knob:
REP: adjust how many times the echo repeats;
DEL: adjust the time interval between each echo.
LEVEL: adjust the volume of the effect processor.
MP3 audio signal volume knob: Adjust the audio signal level from the MP3 player;
MAIN output volume knob
Phones output volume knob
MP3 Player/Recorder controlled keyboard
MP3 Player/Recorder LCD display
MP3 Player/Recorder USB port
MAIN output level meter
The stereo input channel volume knob
The stereo input channel balance knob
6.35mm specification for stereo headphone output interrupts
MAIN output jacks: XLR balanced output interrupt for the connection of active speakers, power amplifiers or other audio devices.
6.35mm-spec stereo line input jack
The stereo line input signal sensitivity selection button, bounce to +4dB, press 10dB;
DC power supply 5V socket
Power switch
BT/MP3 player/recorder operation instructions:
1. Definition of keys
A. Shortly press the previous one/choose upward or left;
Press and hold: reduce the volume.
B. Shortly press: the next one/choose downward or right; Press and hold: increase the volume.
C. Menu key;
D. Play/Pause/Confirm key

System Block Diagram

PYLE Wireless BT Studio Mixer fig 4

PMXU48BT – PMXU68BT

Wireless BT Studio Mixer

Pro Audio Digital DJ Audio Mixer Console (+48V Phantom Power)

PMXU48BT

(2) XLR/14’’ Combo Audio LINE/Microphone Inputs
+48V Phantom Power, Independent Mic Channel
Audio Mixer Type: 4-Channel
Total Unit Dimensions (L x W x H): 6.50’’ x 2.59’’ x 6.50’’ -inches

PMXU68BT

(4) XLR/14’’ Combo Audio LINE/Microphone Inputs
+48V Phantom Power Control
Audio Mixer Type: 6-Channel
Total Unit Dimensions (L x W x H): 8.70’’ x 2.59’’ x 6.50’’ -inches

Features:

Digital Studio DJ Mixer System
Pro Audio Console Controller
Multi-Channel Sound Source Mixing
Microphone, Instrument / Guitar / Keyboard Mix Ability
Built-in Bluetooth Wireless Streaming Receiver
USB Interface: MP3 Flash Drive Reader/Computer Connection
LCD Digital Display & Front Panel Control Center
ID3 Tag Readout: Display Song Title / Artist
Connect & Stream Audio from External Devices
MP3 Digital Audio File Compatibility
(2) XLR 3-Pin (L/R) MAIN Outputs
1/4’’ (6.35mm) Mono / Stereo Inputs
1/4’’ (6.35mm) Headphone Jack
Output Signal Level Indication
BUS Audio Control, Sound Routing
Rotary Adjustment Knobs & LED Indicator Lights
Independent Channel Input Audio Configuration
Gain, High, Low, FX/Send, Pan Tone Audio Adjustment
Power ON/OFF Switch
Used for Professional DJ Studio Applications, Audio Recording, On-Stage Performances

What’s in the Box:

Bluetooth Studio Mixer
Wall Power Adapter

Wireless Bluetooth Connectivity

Hassle-Free Audio Streaming Ability
Works with All of Today’s Latest Devices
(Smartphones, Tablets, Laptops, Computers, etc.)
Bluetooth Network Name: ‘PYLEPRO MIXER’
Bluetooth Version: 2.1
Wireless Range: Up to 33’+ ft.

Technical Specs

CH 1/2 MIC/LINE: Gain: -14+40 dB;
2 Band Graphic EQ: 80Hz/12KHz, +15dB
Audio Level Meter: 2 x 6 Point LED Display
Max Output Level: 3 Vrms
System Gain: -14 +40dB
Frequency Response: +0.5 dB, 20Hz-20kHz
Dynamic Range: 102 dB
THD+N @ 1KHz: <0.03%
Stereo Crosstalk: 92 dB
Maximum USB Flash Support: Up to 64GB
USB Digital Audio File Compatibility File-Types: MP3, WMA, APE, FLAC
Phantom Power Voltage: +48V
Power Consumption: Max: 5W
Power Supply: 120/240V, 5V/1A

Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800 Email: support@pyleusa.com

WARNING:
This product can expose you to a chemical or group of chemicals, which may include Of
“Nickel Carbonate” is known in the state of California to cause cancer, of birth defects, or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.