SoundPeats QCC3040 Hybrid ANC Earbuds User Manual
First Start
Open the charging case lid and take out both earbuds, then remove the insulating film and put them back.
- The earbuds automatically pair to each other after being taken out from the charging case. LED indicator on main earbud flashes in red and white, the second earbud stays in white.
- Activate Bluetooth on the device, and choose “SOUNDPEATS Mini Pro” on Bluetooth list to pair.
ANC Mode
Press and hold the left MB for 1.5 second, switch from Normal mode/ ANC ON/ Pass through mode.
Reset
- Clear the pairing record from your device.
- Place back both earbuds into charging case and make sure they are in charging status.
- Press and hold both buttons for 10s until both LEDs flash in red and white twice, reset complete.
Product Diagram
Wearing
Touch Control
Q&A
Q1: What does the LED of earbuds mean?
The LED indicators of earbuds stay red when it is in charging, disappear when fully charged.
Q2: What does the LED on the charging case tell?
Q3: How to charge the case?
- Use a Type-C adapter to charge the case (current not over 1A).
- Please charge the earbuds and case at least once per 3 months when not in use for a long time.
Q4: Why are the earbuds still connected to my phone after placing back?
- The charging case is out of battery. The case will not turn off the earbuds if the case battery is dead.
- Please make sure the earbuds sit well in the charging case, and the charging contactors on both the earbuds and charging case are clean. Please try something like microfiber cloth to clean the contactors.
Q5: The battery life is not as advertised?
A single charge will not give you 21 hours playtime constantly. The earbuds work around 7 hours per charge with normal mode, 5 hours per charge with ANC mode. The charging case provides another 2 recharges.
DOWNLOAD PDF LINK
SOUNDPEATS_Mini_Pro_User_Manual_ffe88fb5-69e5-4b28-a509-4df300abe6c5
