JBL Quantum 360X Wireless for XBOX featured

JBL Quantum 360X Wireless for XBOX User Manual

JBL logo

JBL Quantum 360X Wireless for XBOX User Manual

JBL Quantum 360X Wireless for XBOX

WHAT’S IN THE BOX

 

JBL Quantum 360X Wireless for XBOX fig 1

OVERVIEW

JBL Quantum 360X Wireless for XBOX fig 2

  1. Game audio-chat balance dial
  2. Volume Control
  3. Microphone Mute / unMute
  4. CHARGING LED
  5. USB-C port
  6. 2.5mm jack for boom microphone
  7. Flat-fold ear cup
  8. POWER / 2.4GHz / Bluetooth LED
  9. Power on / off and Bluetooth pairing slider
  10. 2.4GHz LED11 2.4GHz PAIRING BUTTON

POWER ON & CONNECT (XBOX)

JBL Quantum 360X Wireless for XBOX fig 3

POWER ON & CONNECT (PC, mac ETC.)

JBL Quantum 360X Wireless for XBOX fig 4

Bluetooth

JBL Quantum 360X Wireless for XBOX fig 5

BUTTON COMMAND

JBL Quantum 360X Wireless for XBOX fig 6

First time setup

JBL Quantum 360X Wireless for XBOX fig 7

  • setup8a Connect the headset to your PC via 2.4GHz USB wireless connection.
  • 8b Go to “Sound Settings” -> “Sound Control Panel”.
  • 8c Under “Playback” highlight “JBL Quantum360X WIRELESS FOR XBOX Game” and select “Set Default” -> “Default Device”.
  • 8d Highlight “JBL Quantum360X WIRELESS FOR XBOX Chat” and select “Set Default” -> “Default Communication Device”.
  • 8e Under “Recording” highlight “JBL Quantum360X WIRELESS FOR XBOX Chat” and select “Set Default” -> “Default Device”.
  • 8f In your chat application select “JBL Quantum360X WIRELESS FOR XBOX Chat” as the default audio device.
  • 8G Follow the onscreen instructions to personalize your sound settings.

Dual source switching

JBL Quantum 360X Wireless for XBOX fig 8

MICROPHONE

JBL Quantum 360X Wireless for XBOX fig 9

CHARGING

JBL Quantum 360X Wireless for XBOX fig 10

LED BEHAVIOURS

JBL Quantum 360X Wireless for XBOX fig 11

TECH SPEC

  • Model: QUANTUM360X WIRELESS FOR XBOX
  • Driver size: 40 mm Dynamic drivers
  • Frequency response (Passive): 20 Hz – 20 kHz
  • Frequency response (Active): 20 Hz – 20 kHz
  • Microphone frequency response: 100 Hz – 8 kHz
  • Max input power: 30 mW
  • Sensitivity: 98 dB SPL @1 kHz / 1 mW
  • Maximum SPL: 94 dB
  • Microphone sensitivity: -42 dBV / Pa @1 kHz
  • Impedance: 32 ohm
  • 2.4GHz Wireless transmitter power: < 7 dBm (EIRP)
  • 2.4GHz Wireless modulation: GFSK
  • 2.4GHz Wireless carrier frequency: 2402 MHz – 2480 MHz
  • Bluetooth transmitted power: < 6 dBm (EIRP)
  • Bluetooth transmitted modulation: GFSK, π/4-DQPSK
  • Bluetooth frequency: 2402 MHz – 2480 MHz
  • Bluetooth profile version: HFP: v1.5, A2DP: v1.3
  • Bluetooth version: BT Core: v5.2
  • Battery type: Li-ion battery (3.7 V / 500 mAh)
  • Power supply: 5 V, 1 A
  • Charging time: 2 hrs
  • Music play time with only 2.4GHz on: Up to 22 hrs
  • Talk time with only 2.4GHz on: Up to 22 hrs
  • Music play time with only BT on: Up to 26 hrs
  • Talk time with only BT on: Up to 26 hrs
  • Microphone pickup pattern: Omni-directional
  • Weight: 253.1 g

IC RF Exposure Information and Statement for Headphone

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A- JBLQ360WL) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.007 W/Kg.

The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user’s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

IC RF Exposure Information and Statement for USB Wireless Dongle

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-Q360XWLTM) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.238 W/Kg.

Head operation

The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

Body operation

The device was tested for typical bodily operations where the product was kept with 5 mm distance attaching away from the body. Non-compliance with the above restrictions may result in violation of IC RF exposure guidelines. Use only the supplied or approved antenna.

DOWNLOAD LINK

https://support.jbl.com/on/demandware.static/-/Sites-masterCatalog_Harman/default/dw1712bb87/pdfs/JBL_Quantum%20360X_QSG.pdf

Leave a Reply