Razer Black Shark V2 X USB Wired Esports Gaming Headset User Guide
WHAT’S INSIDE
- Razer Black Shark V2 X USB
A. Adjustable padded headband
B. Hybrid memory foam cushions
C. Razer™ HyperClear noise-cancelling mic
D. Volume control knob
E. Mic mute button
F. USB Type A connector
WHAT’S NEEDED
- USB Type A port
- Windows® 10 64-bit (or higher)
LET’S GET YOU COVERED
TECHNICAL SPECIFICATIONS
HEADPHONES
- Frequency response: 20 Hz – 20 KHz
- Impedance: 32 Ω @ 1 KHz
- Sensitivity (@ 1KHz): 98 dB SPL/mW,1 KHz
- Drivers: Customized Dynamic 50 mm Driver
- Inner ear cup diameter: 63 mm x 43 mm / 2.48 in x 1.69 in
- Connection type: USB Type A
- Cable length: 2 m / 6.56 ft
- Approx. weight: 240 g / 0.53 lbs
- Oval ear cushions: Hybrid memory foam cushions
MICROPHONE
- Frequency response: 100 Hz – 10 KHz
- Signal-to-noise ratio: 60 dB
- Sensitivity (@1 kHz): -42dB V / Pa,1 KHz
- Pick-up pattern: Unidirectional
- Mute Function: Click-to-mute
ON-EAR CUP CONTROLS
- Volume up and down
- Mic mute on/off toggle
AUDIO USAGE
- Audio Usage: Devices with USB Type A port
- Surround sound: Only available on Windows® 10 64-bit (or higher)
SETTING UP YOUR RAZER BLACK SHARK V2 X USB
SETTING IT UP
- Connect the headset to any of the USB ports on your PC
On your device (if applicable), set the Razer Black Shark V2 X USB as the default Input and Output Device.
On your device (if applicable), set the Razer Black Shark V2 X USB as the default Input and Output Device.
SAFETY AND MAINTENANCE
To achieve maximum safety while using your Razer Black Shark V2 X USB, we suggest that you adopt the following guidelines:
- Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com for assistance.
- Don’t take apart the device, and don’t attempt to operate it under abnormal current loads.
- Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C (32°F) to 40°C (104°F). Should the temperature exceed this range, unplug the device to let the temperature stabilize to an optimal level.
- We recommend stretching the headset gently apart before placing them over your head to minimize headband stress. However, please avoid overstretching the headset beyond its technical limits.
- The device isolates external ambient sounds even at low volumes, resulting in lowered awareness of your external surroundings. Please remove the device when engaging in activities that require active awareness of your surroundings.
- Listening to excessively loud volumes over extended periods can damage your hearing. Furthermore, legislation of certain countries permits a maximum sound level of 86db to affect your hearing for 8 hours a day. We, therefore, recommend that you reduce the volume to a comfortable level when listening for prolonged periods. Please, take good care of your hearing.
MAINTENANCE AND USE
The Razer Black Shark V2 X USB requires minimum maintenance to keep it in optimum condition. Once a month, we recommend you clean the device using a soft cloth or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning agents.
LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2022 Razer Inc. All rights reserved. Razer, the triple-headed snake logo, Razer logo, and “For Gamers. By Gamers.” are trademarks or registered trademarks of Razer Inc. and/or affiliated companies in the United States or other countries. All other trademarks are the property of their respective owners. Windows and the Windows logo are trademarks or registered trademarks of the Microsoft group of companies. Razer Inc. Furnishing of this guide does not give you a license to any such copyright, trademark, patent or other intellectual property right. Razer assumes no responsibility for such differences or for any errors that may appear. Information contained herein is subject to change without notice.
