Honeywell RCHS5200WF Security Base Station featuredc mg

Honeywell RCHS5200WF Security Base Station

Honeywell logo

Honeywell RCHS5200WF Security Base Station

Honeywell RCHS5200WF Security Base Station product img

  1. Download the Home App
    Search for the Honeywell Home app in the App Store or Google Play. Download and open the app. The app will guide you step-by-step through the installation.
    Install Tip Create your app account or log in to an existing account before plugging in your Camera Base Station.
  2. Use the App to set up the Camera Base Station Place your Camera Base Station where it gets the widest view of your home.
    Install Tip Your Camera Base Station will flash blue when it’s ready to be set up with the app.

Choose an area where your Camera Base Station has the widest view of the home:

  • Near the main entrance
  • In the main living area
  • On a kitchen counter
  • On a mantle

Understanding your System

Base Station:

Honeywell RCHS5200WF Security Base Station fig 1

Sensor Accessories
Your Camera Base Station can be paired with a number of devices (available separately) to extend the system and your control of it. This included Motion Sensors and Access Sensors, Indoor and Outdoor Motion Viewers, and a Key Fob.

Access Sensor:

Honeywell RCHS5200WF Security Base Station fig 2

Key Fob
Key Fob can be used inside your home to change your security mode with the press of a button.

Honeywell RCHS5200WF Security Base Station fig 3

Voice commands

(Range for commands is 6–8 ft). Say “OK Security,” then say one of the commands listed in the app. Go to device settings for a list of commands. To tell the base station to start listening: “OK Security…” Tell Base station to switch to Away mode: “OK Security, Away” “OK Security, I’m Leaving” Tell Base station to switch to Night mode: “OK Security, Bed Time”

FCC Regulations

§ 15.19 (a)(3)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

§ 15.105
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

IC Regulations
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. Contains lithium-ion batteries. Please dispose of it properly and in accordance with local law.

INPUT: 100 V–240 V ~50 Hz–60 Hz, 0.9 A The operation of this equipment is subject to the following two conditions: (1) this equipment or device may not cause harmful interference, and (2) this equipment or device must accept any interference, including interference that may cause undesired operation.

REFERENCE LINK

https://www.manua.ls/honeywell/rth8500d/manual

DOWNLOAD LINK

Honeywell RCHS5200WF Security Base Station

Leave a Reply