RCA RCR503BE S 3 in 1 Universal Remote Control Guide
Battery Installation
Your RCR503BE universal remote requires 2 new AAA alkaline batteries (sold separately).To install the batteries:
- Turn the unit over, and remove the battery compartment cover.
- Insert the batteries, matching the batteries to the (+) and (-) marks inside the battery case.
Battery Precautions:
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargable (nickel-cadmium) batteries.
- Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with Local and National Regulations
Programming with Direct Entry
To program your remote to control up to three components, follow these steps:
- Manually turn on the component you wish to program the remote to operate.
- Find the four-digit code for your brand of TV,VCR, DVD, satellite receiver, cable box, or digital TV converter in the enclosed code lists.
- Press and hold the CODE SEARCH key until the indicator light turns on.
- Release the CODE SEARCH key.
- Press and release the TV, VCR·DVD or SAT•CBL•DTC key. The indicator light blinks and then remains lit.
Note: DTC refers to digital TV converter. - Enter the four-digit code, using the numeric keypad. After the code is entered, the indicator light turns off.
Note: If the indicator light blinks multiple times, you’ve entered an invalid code. Start from step 2 again. - Aim the remote at the component and press the ON•OFF key. The component should turn off.
Note: If your component does not respond, try all the codes for your brands. If the codes do not work or your brand is not listed, try the Code Search Method that follows.
Programming With Code Search
If your TV, VCR, DVD, satellite receiver, cable box, or digital TV converter does not respond after you have tried all the codes for your brands, or if your brand is not listed, try searching for your code via the Code Search Entry Method. To program your remote via the Code Search Entry Method, follow these steps:
- Manually turn on the component you wish to program the remote to operate.
- Press and hold the CODE SEARCH key until the indicator light turns on.
- Release the CODE SEARCH key.
- Press and release the component key you wish the remote to control—TV, VCR·DVD or SAT•CBL•DTC key. The indicator light blinks once and remains lit.
Important: Find the ENTER key on your remote (don’t press it yet). You will need to press this key
quickly in step 6 below. - Press and release the ON•OFF key until the component turns off.
Important: You may have to press the ON•OFF key up to 200 times. - As soon as the component turns off, press the ENTER key within 4 seconds. The indicator light turns off.
Note: If you wait longer than 4 seconds to press ENTER, the remote goes to the next code—you will need to start the code search from step 1 again.
Accessing Digital Channels
The INPUT and — (dash) key lets you enter a digital sub-channel number, like 59.1,directly. Use the number keys to enter the main channel number (in this case, “59”).Then press the INPUT (–) key and press the subchannel number (in this case, “1”). The INPUT key has two other functions as well: (1) it toggles through all the video sources connected to your TV; and (2) when the remote is in VCR mode, this button toggles between VCR and the TV input.
Care and Maintenance
- Keep the remote dry. If it gets wet, wipe it dry immediately.
- Use and store the remote only in normal temperature environments.
- Handle the remote gently and carefully. Don’t drop it.
- Keep the remote away from dust and dirt.
- Wipe the remote with a damp cloth occasionally to keep it looking new.
- Modifying or tampering with the remote’s internal components can cause malfunction and invalidate its warranty.
90 Day Limited Warranty
Voxx Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product that
should this product or any part thereof, under normal use and conditions, be proven defective in material or
workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s option) without charge for parts and repair labor. To obtain repair or replacement within the terms of the warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station. For the location of the nearest warranty station to you, call toll-free to our control office: 1-800-645-4994.
This Warranty does not cover product purchased, serviced or used outside the United States or Canada. This
Warranty is not transferable and does not extend to costs incurred for installation, removal or reinstallation of
the product. This Warranty does not apply if in the Company’s opinion, the product has been damaged through
alteration, improper installation, mishandling, misuse, neglect, accident, or the simultaneous use of different battery types (e.g. alkaline, standard or rechargeable). No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product. Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation
of incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty
gives you specific legal rights and you may also have other rights, which vary from state/province to state/province
FCC statement
Note : This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
DOWNLOAD LINK
