Turtle Beach Recon Air™ Wireless Chat Communicator Manual FEATURED img

Turtle Beach Recon Air™ Wireless Chat Communicator Manual

TurtleBeach-logo

Turtle Beach Recon Air™ Wireless Chat Communicator Manual

Turtle Beach Recon Air™ Wireless Chat Communicator Manual product img

CONTENTS

Turtle Beach Recon Air™ Wireless Chat Communicator Manual fig 1

CONTROLS

Turtle Beach Recon Air™ Wireless Chat Communicator Manual fig 2

LED BEHAVIORS 

Turtle Beach Recon Air™ Wireless Chat Communicator Manual fig 3

Recon Air™ Wireless Chat Communicator for XboxThe Recon Air™ gives you 10 hours of rechargeable battery life. Make sure to charge it regularly before storing it.

Turtle Beach Recon Air™ Wireless Chat Communicator Manual fig 4

SETUP

Turtle Beach Recon Air™ Wireless Chat Communicator Manual fig 5

  1. Make sure your Xbox controller is connected to your console and powered on.
  2. Connect your transmitter to your Xbox controller’s extension port and aux jack.

Press a button to power on the headset. Your headset and transmitter will pair automatically. Go to Audio & Music > set Headset Volume to maximum. Adjust Headset Chat Mixer all the way to the right towardsTurtle Beach Recon Air™ Wireless Chat Communicator Manual fig 6the Set Mic Monitoring to your preferred level.

  1. Stelle sicher, dass dein Xbox-Controller mit deiner Konsole verbunden und angeschaltet ist.
  2. Verbinde den Sender mit dem Erweiterungsanschluss und AUX-Eingang deines Xbox-Controllers.

Drücke die Taste, um das Headset anzuschalten. Dein Headset und dein Sender verbinden sich automatisch. Gehe zu Audio und Musik > Stelle die Headset-Lautstärke auf Maximum. Bewege den Headset-Chat-Mixer bis ganz nach rechts zum SymbolTurtle Beach Recon Air™ Wireless Chat Communicator Manual fig 6Stelle das Mikrofon-Monitoring auf deine bevorzugte Einstellung.

PAIRING

Your Recon Air™ can pair to the transmitter and your mobile device simultaneously so you can answer calls during gameplay. Follow these instructions to pair to your mobile device:

Turtle Beach Recon Air™ Wireless Chat Communicator Manual fig 7

The headset and transmitter are paired out of the box, indicated by the solid LED on the transmitter. If your transmitter’s LED is double-blinking blue, follow the steps to pair your headset and transmitter:

  1. Plug the transmitter into the powered Xbox Controller, while holding down the multi-function button.
  2. Press and hold the multi-function button on the transmitter until the transmitter’s pairing LED flashes rapidly, then release.
  3. From the OFF position, press and hold the multi-function button for 5s until the LED flashes red and blue to put the headset into pairing mode.
  4. Keep the headset and transmitter close together until the LED indications are solid, indicating a successful pairing.

ADDITIONAL FEATURES

When the headset is ON and paired to a mobile device, the multi-function button on the headset and its transmitter will allow you to switch between your console chat and a Bluetooth® phone call.

 

EARTIP REMOVAL
To change the ear tips, pull firmly to remove them. Choose the ear tip that fits best, align it with the earbud, and stretch around the grill.

Turtle Beach Recon Air™ Wireless Chat Communicator Manual fig 8

ADJUSTING THE EAR HOOK
The Recon Air™ may be worn on your left or right ear. Remove the ear hook to switch its direction.

Turtle Beach Recon Air™ Wireless Chat Communicator Manual fig 9

REFERENCE LINK

https://www.turtlebeach.com/pages/recon-air-chat-communicator

DOWNLOAD PDF LINK

Turtle Beach Recon Air™ Wireless Chat Communicator Manual

Leave a Reply