You are currently viewing Redragon K599-KRS Mechanical Gaming Keyboard User Manual

Redragon K599-KRS Mechanical Gaming Keyboard User Manual

Views: 104
Table of contents show

redragon logo

Redragon K599-KRS Mechanical Gaming Keyboard User Manual

Redragon-K599-KRS-Mechanical-Gaming-keyboard-User-Manual-prduct-img

Dear user
Thank you for choosing the REDRAGON brand. To protect your rights and for better customer service, we ask you to note our warranty rules.

  1. Within 18 months from the purchase date, repair is guaranteed for failure due to electrical circuit problems. Man-made damages, such as disassembly, hard impacts, submersion into the water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
  2. Consumable parts (such as footsticks) and spare parts replacement are not included in our warranty.
  3. Please fill out the warranty card. The warranty card is valid with the stamp of the retailer.
  4. This warranty card will not be reissued if lost. Please keep it in a safe place.

S.O. support

  • Windows XP/Vista/Win7/Win8

How to connect keyboard with computer

Wired Connection

  1. Take out the USB Type C to USB A cable in the package and connect the keyboard to your computer.
  2. The computer will recognize and configure the keyboard automatically.
  3. The keyboard will be ready for use when the configuration is finished.
  4. Once the keyboard is powered up, charging begins. It may take about 5 hours for the keyboard to be fully recharged.

Wireless Connection

  1. Slide the ON/OFF switch on the left side of the keyboard to ON.
  2. Take out the nano USB receiver and plug it into an available USB port on your computer. The computer will recognize and configure the keyboard automatically.
  3. The keyboard will be ready for use when the configuration is finished.
  4. The keyboard can work for about 9 hours when the LED backlight is OFF, and about 2 hours when the LED backlight is fully ON.
  5. In some cases, you may need to pair the keyboard. Turn on the keyboard press [FN]+[K], and plug the USB receiver into any available USB port on your computer within 20 seconds. The keyboard will be paired automatically. Make sure the keyboard has enough power before doing so.
  6. The backlight will flash when the battery is low. Please recharge the keyboard in time or it will turn off automatically soon.

Function Introduction

  1. Standard USB A plug for connection with the computer. Plug and play without drivers or software installation.
  2. Multi-level backlight brightness: Press and hold the [FN] +[X] /[X] to increase or decrease the backlight brightness of the keyboard.
  3. There are 18 backlighting effects. Press the combination keys repeatedly:
    • [FN] + [Insert]: 1. The trial of light. Breathing 3. Normally on
    • [FN] + [Del]: 1. Go with the stream 2. Clouds fly 3. Winding Paths
    • [FN] + [Page Up]: 1. Both ways 2. Surmount 3. Fast and the furious
    • [FN] + [Home]: 1. Ripple Graff 2. Pass without Trace 3. Coastal
    • [FN] + [End]: 1. Flowers blooming 2.Snow winter jasmine 3.Swift action
    • TEN 1 Pane Downl. 1 Hurricane 2 Accumulate 2 Digital Times
  4. To disable or enable the [WIN] and right [CTRL] key: Press [FN]+ [WIN] key to disable or enable the [WIN] and right [CTRL] key so as to avoid quitting the game by accident.
  5. Alterable backlight changing direction: Press [FN] + [8]to alter backlight changing direction.
  6. Changeable backlight colors: Press (FN]+[2] to change backlight colors(9 color selections).
  7. Adjustable lighting speed: Press [FN]+ [.] or [FN]+ [.] to decrease or increase backlight moving speed.
  8. Customizing backlight: Press [FN]+[TAB] to show the preset backlight status. Press (FN]+[TAB) to once again start the backlight setting and the [TAB) key flashes now. Press a key to light it up and press [FN]+[8) repeatedly to select a color for the key. There are 8 selectable colors. You can also leave a key OFF in this step. Press [FN]+[TAB] again to save the setting and the [TAB] key stops flashing. For example, to set the (T] key light as BLUE color, [FN]+[TAB], [TAB] key flashes, next press the letter [T] key to light it up then press [FN]+[X] to select color till it light as BLUE. Finally, press [FN]+[TAB] to save the setting.
  9. Reset the keyboard to factory setting: [FN]+[ScrIk]
  10. Wireless keyboard pairing: [FN]+K

Function Combination keys

  • FN+Esc: ~
  • FN+1: F1
  • FN+2: F2
  • FN+3: F3
  • FN+4: F4
  • FN+5: F5
  • FN+6: F6
  • FN+7: F7
  • FN+8: F8
  • FN+9: F9
  • FN+0: F10
  • FN+[-): F11
  • FN+[=]: F12
  • FN+I: Print Screen
  • FN+O: SCLK
  • FN+P: PAUSE
  • FN+Z: Volume Down
  • FN+X: Volume Up
  • FN+V: Stop
  • FN+B: Previous Track
  • FN+N: Play/Pause
  • FN+M: Next Track
  • FN+CTRL(right) : APP
  • FN+C: Mute

FAQ

  1. If the keyboard doesn’t respond, please check if the keyboard’s USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
  2. If you spill liquid on the keyboard, please unplug the USB cable of the keyboard from the computer immediately. Wipe up excess liquid and put the keyboard in a warm place (for instance, under a lamp) to let the keyboard dry naturally before the next use.

REFERENCE LINK

https://www.redragonzone.com/

Tags: , , , ,

Leave a Reply