Table of contents
show
JALL RGB Night Light Alarm Clock User Manual
Front
- Time Display – Show current time.
- AM/PM Indicator – The AM/PM Indicator is for a 12-hour system only.
- Alarm 1 / 2 Indicator – If you switch on alarm 1 / 2, it will be displayed.
- Alarm 1 / 2 Indicator – If you switch on alarm 1 / 2, it will be displayed.
- Sound-activated Mode Indicator – If you switch on sound–activated mode, it will be displayed.
Back
- Nightlight Brightness Control – Use the scroll wheel to adjust the brightness of the night light.
- Time Set and 12H/24H – Hold the “Time Set ” button for about 4s to set the current time. Press the “Time Set” button to switch between 12-hour and 24-hour display modes.
- Up & Down – Use these two buttons to adjust the value increase or decrease in various settings.
- Alarm Volume Adjust – Press the “Alarm Set” button to select the appropriate alarm volume. There are 3 levels of alarm volume to choose from.
- Alarm Mode Adjust – Hold the “Weekend” button for about 4s to set the working mode of alarm 1 and alarm 2.
Note: 1 – 7: Monday – Sunday (7–day mode). 1 – 5: Monday – Friday (Weekday mode). 6 – 7: Saturday – Sunday (Weekend mode). - Screen Brightness Control – Use the scroll wheel to adjust the brightness of the screen.
- Power Switch – Use the switch to turn alarm clock on or off.
- Working Mode – Use “Working Mode” switch to select whether the alarm clock works in constant mode or sound-activated mode.
- USB Charging Port – Connecting a smartphone through a USB charging port can charge the smartphone.
- 5V Power Input – Please use the original power cord and adapter to power the alarm
Top
- Alarm 1 – Hold the “Alarm 1” button for about 4s to set alarm 1. Press the “Alarm 1” button to switch alarm 1 on/ off.
- Alarm 2 – Hold the “Alarm 2” button for about 4s to set the alarm. Press “Alarm 2” button to switch alarm 2 on/ off.
- Display color changing – Use the “display color changing” button to select the color of the display. There are a total of 8 display colors.
- Nightlight color changing – Use “nightlight color changing” button to select the color of the nightlight. There are a total of 7 nightlight colors
Package Includes:
- 1 x Digital Alarm Clock
- 1 x User Manual
- 1 x USB Cable
- 1 x 5V 1A Power Adapter
Setting:
Time Setting:
12 / 24 H Switch:
Alarm 1 Setting (Alarm 2 is the same as Alarm 1):
Quick Set Alarm Working mode:
Alarm Volume:
Nightlight Setting:
Display Setting:
Snooze:
- When the alarm goes off, press the “Snooze” button (
) once. The corresponding alarm indicator light will flash, giving you an extra 5 minutes of snooze time.
- To turn off the snooze feature, simply press any button. This will stop the flashing of the alarm indicator light. The alarm will go off the next day
Reset:
Use a needle or little stick to push the “Reset” button inside the hole to finish a factory reset.
Product Features:
- Input Voltage: AC110v-240V, 50/60HZ.
- Output Voltage: DC5V / 500MA-2100MA
Trouble Shooting:
- Any questions about the clock, please contact us on Amazon or by email.
- If the alarm clock cannot be turned on after connecting to the power supply, please check the Power Switch at the back to make sure it is in the “ON” position.
- If the alarm clock always turns off automatically, please check the “Working Mode” switch at the back. Make sure the switch is in the “Constant Mode” position.
- Please use the original power cord and adapter to work. If it’s broken, please use a 5V 1A or 5V 2A power adapter as an alternative.
- If you find that the alarm clock is malfunctioning, please try unplugging and reconnecting the power cord. Then press the “RESET” button at the back of the alarm clock. If the issue persists, please contact us for a warranty.