Cellularline-Roller-Clip-Universal-Bluetooth-Headset-User-Manual-featured-img

Cellularline Roller Clip Universal Bluetooth Headset User Manual

Cellularline-BTFINETWSG-Fine-Wireless-Headset-User-Manual-Image

Cellularline Roller Clip Universal Bluetooth Headset User Manual

Cellularline-Roller-Clip-Universal-Bluetooth-Headset-User-Manual-prduct-img

Description:

Cellularline-Roller-Clip-Universal-Bluetooth-Headset-User-Manual-fig-1

  1. Multifunction button
  2. Volume +
  3. Volume –
  4. MicroUSB recharging port
  5. Speaker
  6. LED
  7. MicroUSB recharge cable
  8. Cable rewind button
  9. Plastic clip
  10. Microphone

PRELIMINARY OPERATIONS

Charge the device before use. Use the MicroUSB cable (7) supplied. The red LED indicates that it is charging. When the blue LED comes on, charging is complete.

Pairing the device with a mobile phone:

  • Make sure that the device is switched off and turn off Bluetooth on the phone – Press and hold down the MF button (1) until the LED (6) flashes red/blue in alternating fashion (around 8 seconds).
  • Turn on Bluetooth® on the phone and select ROLLER CLIP HEADSET after it has been detected. The LED (6) on the device will now flash blue to show that the unit has been paired. If pairing is unsuccessful, turn the unit off and try again. Important: if the device or the phone has been turned off or is out of range, you may need to use the menu on your phone to pair them again; or, just press the MF button (1) once.

To pair the device with a second phone (multipoint operation):

  • Turn Bluetooth® off on the first phone
  • To connect to the second phone, see the instructions in the section, “Pairing the device with the phone”
  • Once the connection has been established with the second phone, turn on Bluetooth on the first phone and select ROLLER CLIP HEADSET if it does not connect automatically.
  • To power the device ON: hold down the MF button (1) until the LED (6) lights up blue (around 5 seconds).
  • To turn the device OFF: hold down the MF button (1) until the LED (6) flashes red (around 5 seconds)

USING THE EARPHONE
Answer a call: briefly press the MFB button (1). End a call: Briefly press the MFB button (1). Volume control: press the volume + (2) or volume – (3) button during the conversation. Low battery indicator: the flashing of the red LED accompanied by an acoustic signal indicates that the battery capacity is low.

USE THE MULTIPOINT MODE
Answer an incoming call and end the current one: briefly press the MFB button (1)

TECHNICAL SPECIFICATIONS:

  • Bluetooth®: v4.0
  • Frequency: 2.402GHz to 2.480GHz
  • Profiles supported: Headset – Handsfree – A2DP – AVRCP
  • Range: 10m
  • Talk Time: about 7h
  • Music Time: about 7h
  • Standby Time: about 300h
  • Recharge Time: about 1,5h
  • MicroUSB port Voltage: 5V DC
  • MicroUSB port current: 0,07A
  • Battery Voltage: 3.7V
  • Battery Capacity: 100mAh
  • ERP Power: <-10dBm
  • Weight: 25g

Caution
Using the device may, in some cases, interfere with the correct functioning of medical devices (e.g. pacemakers). Prolonged exposure to high volume and prolonged use may cause permanent damage to hearing. Do not use the device in places where being unable to hear external noises could prove dangerous (e.g. railway crossings, train platforms) If used when driving, comply with the regulations in force in the relevant country.

Children should be supervised when using the device and all accessories and packaging should be kept out of their reach. Do not expose the device for prolonged periods to dampness, dust, soot, steam, direct sunlight, and excessively high or low temperatures, which could result in it malfunctioning Use only suitable chargers for charging Regularly charge the product (at least once every 3 months)

Cellularline S.p.A. declares that this bluetooth headset with charging case complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following Internet address: https://www.cellularline.com/en/dichiarazioneconformita. Cellularline S.p.A. also declares that this bluetooth headset with charging case complies with Directive 2011/65/EU updated from 2015/863/EU

INFORMATION ON THE STATUTORY WARRANTY

Our products are covered by a statutory warranty against conformity defects in accordance with applicable national consumer protection laws. For more information, please see the following page https://www.cellularline.com/en/garanzia-legale

INSTRUCTIONS FOR THE DISPOSAL OF DEVICES FOR DOMESTIC USE
(Applicable in countries in the European Union and those with separate waste collection systems) This mark on the product or documentation indicates that this product must not be disposed of with other household waste at the end of its life. To avoid any damage to health or the environment due to improper disposal of waste, the user must separate this product from other types of waste and recycle it in a responsible manner to promote the sustainable reuse of material resources.

Domestic users should contact the dealer where they purchased the product or the local government office for all information regarding separate waste collection and recycling for this type of product. Corporate users should contact the supplier and verify the terms and conditions in the purchase contract. This product must not be disposed of along with other commercial waste. This product has a battery that cannot be replaced by the user.

Do not attempt to open the device to remove the battery as this could cause malfunctions and seriously damage the product. When disposing of the product, please contact the local waste disposal authority to remove the battery. The battery inside the device was designed to be able to be used during the entire life cycle of the product. For more information, visit the website http://www.cellularline.com

REFERENCE LINK

https://www.cellularline.com/en/Audio/Bluethooth-Earphones/Roller-Clip-Headset—Universal/p/BTCLIPARDP

Leave a Reply