Otium S03 Beats Bluetooth Sport Headphones User Manual
QUICK START GUIDE
The micro USB charging port
- 1-2 hours (full charge)
- Fully charge it before use.
Volume button
- Volume+ /- (Press the button one time, and the volume will change for one level)
Steps to connect the Bluetooth headphones to a Cell phone
- In the headphones turned off state, Long press the MB (About 6 seconds), until the headphones indicator appears red and blue flashing state, entering into the search state(“For pairing state” is heard and the headphones can be searched by other Bluetooth device)
- Turn on the mobile phone’s Bluetooth, and click to search for the headphones Bluetooth. Until the mobile has searched the headphones and displays the Bluetooth headphones model No.
- Click the headphones model to connect. After the connection is successful, The headphone’s blue light will flash.
- Password: 0000 if your mobile phone need to enter a password.
The connection is successful.
1 for 2 multi-point function connection steps
- When the Bluetooth headphones are in turned off state, Long press the MFB for about 6 seconds, Until the headphones indicator appears red and blue lights flash alternatively, entering into the search pairing state.
- Turn on the Bluetooth of mobile phone #1 and search for the Bluetooth headphone’s name, then click to complete the connection.
- Turn off mobile phone # 1’s Bluetooth and long press the headphones MFB till the red light turns off the Bluetooth headphones.
- Turn on the Bluetooth headphones again and enter into the searching and paring state.
- Turn on the Bluetooth function of mobile phone # 2, Searching for the Bluetooth device and find the headphone’s name, click to complete the connection.
- Turn on mobile phone # 1’s Bluetooth function al find the connected Bluetooth headphones before, Click the connection to complete 1 for 2.
Keep your Bluetooth headphones to be used around your phone. The straight without-block Bluetooth distance is about 10 meters between your phone and Bluetooth headphones. Beyond this distance, Its sound quality may decline and lose connection.
Learn how to reconnect the headphones:
- Your Bluetooth headphones will try to reconnect the disconnection automatically.
- If your Bluetooth headphones do not try to reconnect, Please press the MB one time or through your Phone’s Bluetooth menu to reconnect manually.
Restore the factory Settings
- Hold the MFB for about 3 seconds when charging till the red and blue lights flash three times to restore factory Settings.
Common problems and solutions
The mobile phone can’t search the Bluetooth headphones Solutions:
- To confirm if the Bluetooth headphones are turned o (Whether the indicator light is on or Red and Blue light flash alternatively)
- If the Bluetooth headphones are turned on but still can not be searched, please restart your mobile phone and the Bluetooth headphones Notes: A. When the Bluetooth headphones are in pairing mode to connect in 2 minutes, the headphones will turn off automatically after 2 minutes. B. Hold the MB for about 3 seconds when charging, Till the red and blue lights flash three times, it can restore factory Settings.
After connecting the Bluetooth headphones to your mobile phone, there is always disconnection or noise. Solutions:
- The Bluetooth headphone is power low, please charge the headphone soon.
- There is a block between the Bluetooth headphones and your mobile phone or it is beyond the signal distance Also, please do not cover the Bluetooth headphones with your hand. To keep the signal stable, please keep your phone and headphones in the same direction.
Learn how to use Bluetooth headphones to listen to music or chat on a computer Answer:
If your computer is equipped with Bluetooth, just open the Bluetooth function and search for the opening Bluetooth headphones, or else you need a Bluetooth adapter. By Bluetooth software (IVT), the adapter car connects the Bluetooth headphones to the computer. Computers with an XP system can identify any Bluetooth adapter automatically and it does not need a driver, while the adapter software built-in XP can only.
What’s the Bluetooth pairing password?
Answer:
The Bluetooth pairing password is 0000, most phones support entering passwords automatically, and only a small part of phones need to enter password 0000 manually.
When using, the Max distance between Bluetooth headphones and mobile phone or adapter Answer:
The available distance between Bluetooth headphones and a mobile phone or adapter is 10M. Generally speaking, the result is the best when there is a block between them. When it reaches the distance limit, there is light noise when calling.
The red light is not on when charging Possible reason:
It is a long time not to use the headphones Solutions: It needs to charge for about 30 minutes, then the red light might be bright Note: Overcharging or keeping Bluetooth headphones in a closed car, etc. such similar environments, it will reduce the capacity and life of the battery.