Dimplex-SBN20E-Springborne-Coal-Stove-User-Manual-featured-img

Dimplex SBN20E Springborne Coal Stove User Manual

Dimplex logo

Dimplex SBN20E Springborne Coal Stove User Manual

Dimplex-SBN20E-Springborne-Coal-Stove-User-Manual-prduct-img

Dimplex Important Safety Advice:

When using electrical appliances, basic precautions should be followed to reduce the risk of fire, electric shock, and injury to persons, including the following :

  • If the appliance is damaged, check immediately with the supplier before installation and operation.
  • Do not use this heater in the immediate surroundings of a bath, shower, or swimming pool.
  • Do not use outdoors.
  • This heater must not be located immediately below a fixed socket outlet or connection box.
  • Do not cover or obstruct in any way the heat outlet grille located at the bottom of the heater. Overheating will result if the heater is accidentally covered.
  • Ensure that furniture, curtains, or other combustible materials are positioned no closer than 1 meter from the heater.
  • In the event of a fault unplug the heater.
  • Unplug the heater when not required for long periods.
  • Keep the supply cord away from the front of the heater.
  • Although this heater complies with safety standards, we do not recommend its use on deep pile carpets or long hair type of rugs.
  • This appliance is not intended for use by children or other persons without assistance or supervision if their physical, sensory or mental capabilities prevent them from using it safely. Children should be supervised to ensure that they do not play with the appliance.
  • The appliance must be positioned so that the plug is accessible.
  • If the supply cord is damaged it must be replaced by the manufacturer or service agent or similarly qualified person to avoid a hazard.

General
Unpack the heater carefully and retain the packaging for possible future use, in the event of moving or returning the fire to your supplier. Unpack the heater carefully and retain the packaging for possible future use, in the event of moving or returning the fire to your supplier. This model is designed to be free-standing and is normally positioned against a wall. This model is designed to be free-standing and is normally positioned against a wall. A choice of 1kW or 2kW heat output is provided by the fan heater, which is located at the bottom of the unit.

A choice of 1kW or 2kW heat output is provided by the fan heater, which is located at the bottom of the unit. Before connecting the heater check that the supply voltage is the same as that stated on the heater. Before connecting the heater check that the supply voltage is the same as that stated on the heater. On the Springborne model, loose coals are packed separately within the carton. When the heater is assembled the coals can be placed on top of the fuel bed, as required.

On the Springborne model, loose coals are packed separately within the carton. When the heater is assembled the coals can be placed on top of the fuel bed, as required. Please note: Used in an environment where background noise is very low, it m ay be possible to hear a sound that is related to the operation of the flame effect. This is normal and should not be a cause for concern.

Electrical

This fire is suitable for operation on an AC~ electricity supply having the same voltage as that shown on its rating label. This fire is suitable for operation on an AC~ electricity supply having the same voltage as that shown on its rating label. In the event of replacing the fuse supplied, a 13 amp fuse approved by ASTA to BS 1362 must be used. In the event of replacing the fuse supplied, a 13 amp fuse approved by ASTA to BS 1362 must be used. If the socket outlets in your home are not of the 13 amp BS1363 type they will not accept the plug connected to this heater, therefore cut off the plug.

When cut off this plug can constitute a shock hazard if inserted into a socket outlet. It must therefore be disposed of safely. If the socket outlets in your home are not of the 13 amp BS1363 type they will not accept the plug connected to this heater, therefore cut off the plug. When cut off this plug can constitute a shock hazard if inserted into a socket outlet. It must therefore be disposed of safely. Before wiring the appropriate plug please note that the wires in this main lead are colored following the following code.

  • GREEN/YELLOW – EARTH
  • BLUE – NEUTRAL
  • BROWN – LIVE

Connect the Green/Yellow wire to the terminal marked “E’ or the earth symbol Dimplex-SBN20E-Springborne-Coal-Stove-User-Manual-fig-1 coloured Green or Green/Yellow. Connect the Brown wire to the terminal marked “L’ or colored Red. Connect the Blue wire to the terminal marked N or colored Black or

DO NOT connect the Brown (Live) or the Blue (Neutral) wires to the Earth terminal of your 13 amp plug. If the terminals of the plug are unmarked or you are in any doubt, consult a qualified electrician. DO NOT connect the Bro wn (Live) or the Blue (Neutral) wires to the Earth terminal of your 13 amp plug. If the terminals of the plug are unmarked or you are in any doubt, consult a qualified electrician.

CAUTION:
If you use this heater in conjunction with a thermal control, program controller, timer, or any other device that switches the heater on automatically observe all safety warnings at all times.

Operation

The unique flame effect may be enjoyed whether or not the heating elements are in operation.

Controls
The heater controls are located on the right-hand side of the fan heater. (see Fig 1) Three switches provide a choice of heat settings. A switch is in the ON position when the side with the markings on (i.e. I, I, or II ) is pushed in

Dimplex-SBN20E-Springborne-Coal-Stove-User-Manual-fig-2

  • Switch 1 ( I ) Controls the electricity supply to the heater and flame effect. Note: This switch must be in the ON ( I ) position for the heater to operate with or without heat.
  • Switch 2 ( I ) Provides 1kW heat output
  • Switch 3 ( II ) Provides 2kW output with switch 2

Maintenance

WARNING 
BEFORE UNDERTAKING ANY MAINTENANCE OR CLEANING REMOVE THE PLUG OR DISCONNECT FROM THE ELECTRICITY SUPPLY.

Lamp Replacement

Dimplex-SBN20E-Springborne-Coal-Stove-User-Manual-fig-3

Two lamps are located behind the back panel as indicated in Fig.3.

Dimplex-SBN20E-Springborne-Coal-Stove-User-Manual-fig-4

To gain access to the lamps, the four screws which secure the back panel must be removed. Remove and slide out the panel as indicated in Fig. 4

Dimplex-SBN20E-Springborne-Coal-Stove-User-Manual-fig-6

Remove the defective lamp by unscrewing it as shown – see Fig. 5. Replace it with a 60W E14 SES Clear Candle lamp. Take care not to over-tighten the lamp. Refit the back panel and secure it with the four screws

Safety cut-out
An automatic cut-out will switch off the heater if for any reason it overheats. This could occur for instance, if the air i nlet or outlet were restricted in any way. If the cut-out operates, the heater will switch off. The heater will switch on once the obstruction has been removed and the heater has cooled. If the cut-out continues to operate intermittently, the heater should be switched off and Customer Services contacted.

Cleaning

For general cleaning use a soft clean duster – never use abrasive cleaners. The plastic viewing screen should be cleaned carefully with a soft cloth. DO NOT use proprietary glass cleaners.

After Sales Service
Your product is guaranteed for one year from the date of purchase. Within this period, we undertake to repair or exchange this product free of charge (excluding lamps & subject to availability) provided it has been installed and operated following these instructions. Your rights under this guarantee are additional to your statutory rights, which in turn are not affected by this guarantee.

Should you require after-sales service you should contact our customer services help desk on 0870 727 0101. It would assist us if you could quote the model number, series, date of purchase, and nature of the fault at the time of your call. The customer services help desk will also be able to advise you should you need to purchase any spares. Please do not return a faulty product to us in the first instance as this may result in loss or damage and delay in providing you with a satisfactory service. Please retain your receipt as proof of purchase.

The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3 which cover the essential requirements of EEC Directives 73/23 and 89/336

REFERENCE LINK

https://www.dimplex.co

https://www.dimplex.co.uk/product/springborne

Leave a Reply