Sportdog SD-350 Yard Trainer 350 Remote Trainer User Manual
Safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
WARNING
- Not for use with aggressive dogs. Do not use this product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or a certified trainer.
- This device contains Lithium-Ion (Li-Ion) batteries; never incinerate, puncture, deform, short-circuit, or charge with an inappropriate charger. Fire, explosion, property damage, or bodily harm may occur if this warning is not followed.
- Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
CAUTION
Please read and follow the instructions in this manual. The proper fit of the collar is important. A collar worn for too long, or made too tight on the dog’s neck may cause skin damage. This is called bed sores; it is also called decubitus ulcers or pressure necrosis.
- Avoid leaving the collar on the dog for more than 12 hours per day.
- When possible reposition the collar on the dog’s neck every 1 to 2 hours.
- Check the fit to prevent excessive pressure; follow the instructions in this manual.
- Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts.
- When using a separate collar for a lead, don’t put pressure on the electronic collar.
- Wash the dog’s neck area and the contacts of the collar weekly with a damp cloth.
- Examine the contact area daily for signs of a rash or a sore.
- If a rash or sore is found, discontinue the use of the collar until the skin has healed.
- If the condition persists beyond 48 hours, see your veterinarian. For additional information on bed sores and pressure necrosis, please visit the FAQ section for remote trainers at www.sportdog.com.
Thank you for choosing the SportDOG Brand.® Used properly, this product will help you train your dog efficiently and safely. To ensure your satisfaction, please review this owner’s manual thoroughly. If you have questions regarding this product’s operation, please see this manual’s Frequently Asked Questions or Troubleshooting section, contact our Customer Care Center at 1-800-732-0144, or visit our website at www.sportdog.com.
COMPONENTS
HOW THE SYSTEM WORKS
The SportDOG™ HOUNDHUNTER® 3225 has been proven safe, comfortable, and effective for all dogs over 8 pounds. Consistent, correct use of this product allows you to reinforce commands and correct misbehavior from two miles away. The Remote Transmitter sends a signal, activating the Collar Receiver to deliver a harmless stimulation. With proper training, a dog will learn to associate this signal with a command. Like all SportDOG products, this model features adjustable stimulation levels so you can tailor the stimulation level to your dog’s temperament, eliminating the risk of over-correction.
KEY DEFINITIONS
REMOTE TRANSMITTER
- REMOTE TRANSMITTER: Transmits the radio signal to the Collar Receiver. It is waterproof and can be submerged in water to a depth of 25 feet.
- INTENSITY DIAL: Provides multiple levels/types of stimulation so you can match the correction to your dog’s temperament.
- TRANSMITTER INDICATOR LIGHT: Indicates that a button is pressed and also serves as a low-battery indicator.
- TOGGLE SWITCH: This switch is factory-set so that the Remote Transmitter can control two Collar Receivers.
- UPPER BUTTON: This button is factory-set to deliver continuous stimulation.
- LOWER BUTTON: This button is factory-set to deliver momentary stimulation or a “Nick.”
- SIDE BUTTON: This button is factory-set to deliver a tone without stimulation.
- CHARGING JACK: For connecting the charger. Although the Remote Transmitter is waterproof without it, keep the cover in place when not charging to keep debris out of the opening.
COLLAR RECEIVER
COLLAR RECEIVER:
Receives the radio signal from the Remote Transmitter and delivers the stimulation, vibration, and/or a tone for correcting your dog. It is waterproof and can be submerged in water to a depth of 25 feet.
RECEIVER INDICATOR LIGHT:
Indicates when the Collar Receiver has been turned on or off and also serves as a low-battery indicator.
CONTACT POINTS:
The contacts through which the Collar Receiver delivers stimulation.
ON/OFF BUTTON:
Momentarily pressing and releasing this button turns the Collar Receiver on and off.
PREPARE THE REMOTE TRANSMIT
CHARGE THE REMOTE TRANSMITTER
- Lift the rubber cover protecting the Charging Jack.
- Connect one of the charger connectors to the Charging Jack.
- Plug the charger into a standard 120-volt AC wall outlet.
- Charge the Remote Transmitter for 2 hours for the first charge and every charge thereafter.
Using Li-Ion technology, the Remote Transmitter only requires a 2-hour charge. It is not harmful to let the unit charge for more than 2 hours. - . When charging is complete, replace the rubber cover.
NOTE:
The approximate battery life between charges is 40 to 60 hours, depending on the frequency of use. The Remote Transmitter is factory set to mode 1. If the dial is set to V/T, in this mode, and any button is pressed, then no signal will be sent to the Collar Receiver. The mode of the Remote Transmitter will need to be changed in order to utilize this feature (see Step 5).
TRANSMITTER INDICATOR LIGHT
OPERATIONAL MODE | LIGHT COLOR | BATTERY STATUS | LIGHT FUNCTION |
Continuous stimulation or Tone only button pressed | Green | Good | Light is solid in color while the button is pressed |
Continuous stimulation or Tone only button pressed | Red | Low | Light is solid in color while the button is pressed |
The momentary stimulation button pressed | Green | Good | Light flashes once and turns off |
The momentary stimulation button pressed | Red | Low | Light flashes once and turns off |
Unit is charging | Red | Low | Light is solid in color while on the charger |
The unit is fully charged (charger still connected) | Green | Good | Light flashes once per second once the battery is completely charged |
PREPARE THE COLLAR RECEIVE
CHARGE THE COLLAR RECEIVER
- Place the Collar Receiver in the Charging Cradle as shown.
- Place the charger connector into the back of the Charging Cradle.
- Plug the charger into a standard 120-volt AC wall outlet.
- Charge the Collar Receiver for 2 hours for the first charge and every charge thereafter.
Using Li-Ion technology, the Collar Receiver only requires a 2-hour charge. It is not harmful to let the unit charge for more than 2 hours.
CHARGE CRADLE INDICATOR LIGHT
OPERATIONAL MODE | LIGHT COLOR | LIGHT FUNCTION |
No Collar Receiver on the Charging Cradle but the charger is connected | Green | Light is solid in color |
Unit is charging | Red | Light is solid in color while charging |
Unit is fully charged (Collar Receiver on Charging Cradle) | Green | Light flashes once per second once the battery is completely charged |
TO TURN THE COLLAR RECEIVER ON:
Press and release the On/Off Button when the Receiver Indicator Light comes on. The Collar Receiver will beep 1 to 3 times depending on what stimulation range is chosen (page 11). The default is 2 or medium.
RECEIVER INDICATOR LIGHT
OPERATIONAL MODE | LIGHT COLOR | LIGHT FUNCTION | BATTERY STATUS | SPEAKER FUNCTION | VIBRATION |
Unit is turned on via On/Off Button | Green | Light is solid in color during beep sequence | Good | Beeps 1-3 times depending on stimulation range setting (2 is the default setting). Please see page 11. | N/A |
Unit is turned on via On/Off Button | Red | Light is solid in color during beep sequence | Low | ||
Unit is turned off via On/Off Button | Red | Light is solid in color during beep sequence | Beeps for 2 seconds | N/A | |
Unit is on | Green | Light flashes every 2 seconds | N/A | ||
Unit is on | Red | Light flashes every 2 seconds | Low | N/A | |
Unit is delivering continuous stimulation | Red | Light is solid in color for as long as button is pressed | N/A | ||
Unit is delivering momentary stimulation | Red | Light will quickly flash once no matter how long button is pressed | N/A | ||
Unit is delivering tone | Off | Unit will beep for as long as button is pressed | N/A | ||
Unit is delivering vibration | Off | Unit will vibrate for as long as button is pressed |
RECHARGEABLE BATTERIES
WARNING
- This device contains Lithium-Ion (Li-Ion) batteries; never incinerate, puncture, deform, short-circuit, or charge with an inappropriate charger. Fire, explosion, property damage, or bodily harm may occur if this warning is not followed.
- Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
- The rechargeable Lithium Ion (Li-Ion) batteries are not memory sensitive, do not require depletion before charging, and cannot be overcharged. Batteries should never be removed from the battery compartment for charging.
- The batteries come partially charged from the factory but will require a full charge before the first use.
- When storing the unit for long periods, remember to regularly give batteries a full charge. This should be done once every 3 to 4 months.
- You should expect hundreds of recharge cycles from your batteries. However, all rechargeable batteries lose capacity over time relative to the number of recharge cycles they experience. This is normal. If your operating time drops to half of the original life, contact the Customer Care Center to purchase a new battery.
FIT THE COLLAR RECEIVE
IMPORTANT:
The proper fit and placement of the Collar Receiver is important for effective training. The Contact Points must have direct contact with your dog’s skin.
CAUTION
Please read and follow the instructions in this manual. The proper fit of the collar is important. A collar worn for too long, or made too tight on the dog’s neck may cause skin damage. This is called bed sores; it is also called decubitus ulcers or pressure necrosis.
- Avoid leaving the collar on the dog for more than 12 hours per day.
- When possible reposition the collar on the dog’s neck every 1 to 2 hours.
- Check the fit to prevent excessive pressure; follow the instructions in this manual.
- Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts.
- When using a separate collar for a lead, don’t put pressure on the electronic collar.
- Wash the dog’s neck area and the contacts of the collar weekly with a damp cloth.
- Examine the contact area daily for signs of a rash or a sore.
- If a rash or sore is found, discontinue the use of the collar until the skin has healed.
- If the condition persists beyond 48 hours, see your veterinarian. For additional information on bed sores and pressure necrosis, please visit the FAQ section for remote trainers at www.sportdog.com.
These steps will help keep your dog safe and comfortable. Millions of dogs are comfortable when they wear stainless steel contacts. Some dogs are sensitive to contact pressure. You may find after some time that your dog is very tolerant of the collar. If so, you may relax some of these precautions. It is important to continue daily checks of the contact area. If redness or sores are found, discontinue use until the skin has fully healed.
GENERAL TRAINING TIPS
BEFORE TRAINING YOUR DOG WITH THIS PRODUCT:
You will have the most success using this remote trainer if you always remember to teach a command before trying to reinforce the command with a remote trainer. We recommend that you read the enclosed Training Guide and watch the enclosed DVD before training with this remote trainer. Your training will be easier and proceed faster if you follow the guidelines of these teaching assistants. In addition, always keep the following training tips in mind:
- Eliminate one misbehavior or teach one obedience command at a time. If you move too fast with the training, your dog may become confused.
- Be consistent. Give your dog a tone, vibration, and/or stimulation with each misbehavior.
- Do not overcorrect your dog. Use as few stimulations as possible to train your dog.
- Restrict your dog from situations in which he has a history of misbehaving unless you can supervise him and use the HoundHunter® 3225 for applying tone, stimulation, or vibration.
- If you notice one situation in which your dog misbehaves repeatedly, set up this situation as a training session. This will dramatically increase your chances of success.
- Redirect his attention to a simple and appropriate behavior (i.e. a known command, such as “Sit”).
- Never use the HoundHunter 3225 to correct or eliminate any form of aggressive behavior. If your dog exhibits such behavior, contact a professional trainer. Another factor contributing to aggression in dogs is social dominance. Every dog is different.
ACCESSORIES
To purchase additional accessories for your SportDOG Brand® HoundHunter® 3225, contact the Customer Care Center at 1-800-732-0144 or visit our website at www.sportdog.com to locate a retailer near you.
Component | Part Number |
3⁄4” Blaze Orange Collar Strap | SAC00-10815 |
3⁄4” Blue Collar Strap | SAC00-11921 |
3⁄4” Red Collar Strap | SAC00-11820 |
3⁄4” Yellow Collar Strap | SAC00-12795 |
3⁄4” Green Collar Strap | SAC00-10817 |
3⁄4” White Collar Strap | SAC00-12796 |
Collar Receiver (does not include collar strap) | SDT00-12490 |
Remote Transmitter Only | SDT00-12857 |
Remote Transmitter with antenna, belt clip, and lanyard | SDT00-12858 |
Antenna | SAC00-12543 |
Contact Points (Short) | SAC00-12571 |
Contact Points (Long) | SAC00-12570 |
Lanyard | SAC00-12799 |
Battery Kit (Collar Receiver) | SAC00-12544 |
Battery Kit (Remote Transmitter) | SAC00-12542 |
Belt Clip | SAC00-12528 |
Car Charger | SAC00-12842 |
Adapter | SDT00-12272 |
Cradle | SAC00-12541 |
FREQUENTLY ASKED QUESTIONS
What purpose does V/T on the intensity dial serve? | In modes 5 and 6, you have the flexibility of delivering tone or vibration respectively, or stimulation to all 6 dogs. |
Is the stimulation safe for my dog? | While Continuous and/or Momentary stimulation may be unpleasant, it is harmless to your dog. Electronic training devices require interaction and training from the owner to achieve desired results. |
How old does a dog have to be before using the HoundHunter® 3225? | Your dog should be able to learn basic obedience commands such as “Sit” or “Stay.” The Collar Receiver may be too large for dogs under 8 pounds. |
Once my dog is trained and has been obeying my commands, will my dog have to continue to wear the Collar Receiver? | Your dog may need to wear the Collar Receiver from time to time for reinforcement. Also, many hunters keep the Collar Receiver on their dog(s) while hunting for maximum control. |
Is the Collar Receiver waterproof? | Yes. If the rechargeable battery pack ever needs to be replaced, make sure the o-ring and o-ring groove are free from dirt and debris. |
Can my Collar Receiver be used around salt water? | If the Collar Receiver is used in or around salt water, the Collar Receiver should be rinsed with fresh water following each use. |
Can I use the HoundHunter 3225 with more than one dog? | Yes, the HoundHunter 3225 is expandable to a maximum of 6 dogs. SportDOG™ SDR-AH Add-A-Dog® Collar Receivers must be purchased. Please refer to back cover for a list of other compatible Collar Receivers. |
Can I use the HoundHunter 3225 on aggressive dogs? | We do not recommend any of our products to be used on aggressive dogs. We recommend you contact your local veterinarian or professional trainer to determine if your dog might be aggressive. |
Will I get exactly two miles of range with the HoundHunter 3225? | The range you get with your HoundHunter 3225 will vary according to terrain, weather, vegetation, as well as, transmission from other radio devices. To get the maximum amount of range, please refer to the “How the System Works” section of this guide. |
How long can I continuously deliver stimulation to my dog? | The maximum amount of time you can press the Continuous Stimulation Button and deliver stimulation to your dog continuously is 10 seconds. After 10 seconds, the Remote Transmitter will “time-out,” and the Continuous Stimulation Button must be released and pressed again. |
What do I do if my dog’s neck becomes red and irritated? | This condition is due to the Contact Points irritating the skin. Discontinue use of the Collar Receiver for a few days. If the condition persists beyond 48 hours, see your veterinarian. Once the skin returns to normal, resume use, and monitor the skin condition closely. |
The Intensity Dial seems difficult to rotate. Is this normal? | Yes. This prevents accidental changes in intensity and encourages an optimal waterproof seal. The knob will “break in” and be slightly easier to turn as you use it. |
Can I attach a leash to the HoundHunter 3225? | DO NOT attach a leash to the HoundHunter 3225. You may put a separate non-metallic collar on your dog’s neck and attach a leash. Be sure the extra collar does not interfere with the Contact Points. |
Can I program my HoundHunter 3225 to work with my other SportDOG Brand® systems? | Yes. |
TROUBLESHOOTING
The answers to these questions should help you solve any problem you have with this system. If they do not, please contact the Customer Care Center at 1-800-732-0144 or visit our website at www.sportdog.com. | |
• Check to see if the Collar Receiver has been turned on.
• Many factors can impact the range you have with the HoundHunter® 3225. For a list of these factors, please refer to “How the System Works”. • You can verify the Collar Receiver is delivering stimulation to your dog by placing the test light, enclosed in your kit, on the Collar Receiver. Please refer to the “Test Light Instructions” section for details. • Increase the Intensity Dial. Refer to “Find the Best Intensity Level for Your Dog” for more information. • Increase the StimulationRange. Refer to “Changing Stimulation Ranges” for more information. • Make sure the Collar Receiver’s Contact Points are placed snugly against your dog’s skin. Refer to “Fit the Collar Receiver” for more information. • You may need to switch to the longer Contact Points included with your system or trim the hair beneath the Contact Points. • If you notice your operating time dropping to about half the original time, your Collar Receiver battery needs to be replaced. Contact the Customer Care Center to purchase a new one. | |
The Collar Receiver will not turn on. | • Make sure the Collar Receiver has been charged. The Collar Receiver will charge in 2 hours. |
The Collar Receiver is not responding to the Remote Transmitter. | • Verify the Collar Receiver has been turned on. Refer to “Turning the Collar Receiver On and Off”. • Refer to “Match the Collar Receiver and Remote Transmitter.” |
FCC COMPLIANCE
This device complies with part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Contact customer service or an experienced radio/TV technician for assistance.
Caution: Unauthorized changes or modifications to the equipment may violate FCC regulations and could void the user’s authority to operate the equipment.
CUSTOMER CARE INTERNATIONAL
Australia:
- Tel: 1800 786 608
- Monday – Friday 8 AM – 5 PM
New Zealand:
- Tel: 0800 543 054
- Monday – Friday 12 PM – 7 PM
Canada:
- Tel: 800-732-2677
- Monday – Friday 8 AM – 8 PM/Saturday 9 AM – 5 PM
- Lundi – Vendredi 8h00 à 20h00/Samedi 9h00 à 17h00