Table of contents
show
Lubluelu SD80 Automatic Empty Station Instruction Manual
Safety Information
Use Restrictions
- Do not allow people with physical, mental, or sensory impairments or children to use or operate this product.
- Do not allow humans or pets, fingers, etc. near the vacuum port of the robot while the empty station is working.
- Do not sweep up anything that is burning (eg: an unextinguished cigarette) with this appliance.
- Please clean the dust station with the power turned off.
- Do not wipe any part of this product with a damp cloth or any liquid.
- Please use this product according to the instructions in the manual.
- Any loss and injury caused by improper use is the sole responsibility of the user.
Warning
- This product should not be used as a toy. Children and pets should be supervised while using this product.
- Do not sit or stand on this appliance.
- This product is equipped with a region-approved power cord for use only with a standard household AC outlet. Do not use any other power cord.
- If you need to replace the power cord, please contact Customer Service to ensure the correct country-specific power cord source is selected.
- Do not open or disassemble the inside of this equipment except as permitted by these instructions. There are no user-accessible parts inside the device. If disassembly is required, please consult professional maintenance personnel.
- There is a risk of electric shock and should only be used in dry indoor locations.
- Do not operate this appliance with wet hands.
- Please store or operate this equipment at room temperature.
- To reduce the risk of electric shock, unplug the appliance’s power cord before cleaning.
- Do not pour any liquid into the appliance and do not immerse the device in water.
- Do not use it outdoors or in damp locations.
- Do not use it if the cord or plug is damaged. If the device does not work properly, please return it to a service center.
- Do not put any debris. Do not use with the opening blocked, and keep away from dust, lint, hair, and anything that might reduce airflow.
- To avoid the risk of accidental resetting of the thermal cutout, this device must not be used with external switching devices (such as timers) or with external circuits.
- This product cannot be used with any other type of power adapter, use of other power adapter will immediately void the warranty.
- Do not use it without a dust bag or filter.
- Please maintain the device reasonably, do not put foreign objects into the device, and ensure that there is no debris in the device.
- Before cleaning or maintenance please separate the robot vacuum from the dust collector.
About Product
Automatic Empty Station
Auto-empty dock Accessories
Installation
Install an Automatic Empty Station
- Remove the Automatic Empty Station and place it on a flat ground against the wall, sort out the excess wire.
- According to the figure, keep a distance of more than 0.5m to the left and right of the charging station and 1.5m in front of the charging station, while access to meet the corresponding voltage power supply to ensure the normal operation of the dustbin.
Routine Maintenance
How to change the dust bag
Clean the dust channel of the self-emptying station
If the dock indicator blinks red after replacing the dust bag, please unplug it Reverse the dock, through the dust channel perspective window, and check whether the dust channel of the dock is blocked If the dust channel is blocked, remove the dust channel perspective window with a screwdriver according to the following figure
Clean the self-emptying station infrared sensor/ Charging contact shrapnel test one ended to dies regularly once mean, soft, dry cloth.
Troubleshooting
